Color Color |
|---|
 | Red |  | Blue- Green |
 | Yellow |  | Blue |
 | Orange | ||
Roller Style Roller Style |
|---|
 |  |
| Shaft Mount | Threaded Stud |
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
|
Lubricant Lubricant |
|---|
|
About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
Abrasion-Resistant Drive Rollers
These urethane rollers are nonmarring and wear resistant. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||||
| 1 1/2" | 1 1/4" | 3/8" | 7/8" | 3/8" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 000000 | |
| 1 1/2" | 1 1/4" | 1/2" | 7/8" | 3/8" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
Urethane Roller with Steel Hub | |||||||||||
| 2" | 29/32" | 5/8" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1 1/4" | 1 5/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 60A (Medium) Blue-Green | 0000000 | 00000 |
Tight-Tolerance Drive Rollers
The surface of these rollers is molded to a ±0.003" tolerance to provide more consistent surface contact. Also known as contact wheels and feed rollers, they have tapped hubs that allow you to mount them onto a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Roller | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Hub Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | ||||||||||
| 3/8" | 1/4" | 1/8" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 000000 | |
| 1/2" | 1/4" | 3/16" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 3/16" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 3/16" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 1/4" | 5/16" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 3/4" | 5/16" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 1/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 3/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 1/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 3/4" | 3/8" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 3/8" | 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 1" | 1/2" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
Abrasion-Resistant Flex-Grip Drive Rollers
These urethane rollers are nonmarring and wear resistant. The teardrop-shaped sidewall holes and soft surface allow the roller to gently grab and maintain contact as it is compressed. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
| 4" | 29/32" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
| 4" | 29/32" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
| 4" | 1 15/16" | 1" | 1 3/8" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 00000 |
Abrasion-Resistant Self-Cleaning Drive Rollers
These urethane rollers are nonmarring and wear resistant. Ridges on the surface push dirt and debris out of the way. Also known as contact wheels and feed rollers, these rollers have tapped hubs that allow you to mount them onto a shaft or stud to transmit power.
For technical drawings and 3-D models, click on a part number.
Roller | Hub | Set Screws | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Dia. | Wd. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||
| 4" | 1 15/16" | 3/4" | 1 1/4" | 1/2" | Set Screw | 2 | Yes | -65° to 200° | 35A (Soft) Yellow | 0000000 | 000000 |
Abrasion-Resistant Keyed Drive Rollers
These urethane rollers are wear and chemical resistant. They’re also nonmarring. Use them with a keyed shaft to prevent slippage in high-torque applications. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power.
Note: The hub on rollers with 3" to 4" roller diameter protrudes on one side only.
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Hub | |||||||||||||
| 3" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 3" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 300 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 00000 |
| 4" | 2" | 1/2" | 1/8" | 1/16" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 4" | 2" | 3/4" | 3/16" | 3/32" | 3 1/4" | 350 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 00000 |
| 5" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 5" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 400 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 425 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 3" | 1/2" | 1/8" | 1/16" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 6" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 6" | 3" | 1 1/4" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 2" | 1/2" | 1/8" | 1/16" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 2" | 3/4" | 3/16" | 3/32" | 2 3/16" | 500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 8" | 3" | 1/2" | 1/8" | 1/16" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 8" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 8" | 3" | 1 1/4" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 10" | 3" | 3/4" | 3/16" | 3/32" | 3 1/4" | 800 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 10" | 3" | 1" | 1/4" | 1/8" | 3 1/4" | 1,600 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 10" | 4" | 1 1/2" | 3/8" | 3/16" | 4 1/4" | 2,500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 0000000 | 000000 |
| 10" | 5" | 1 1/2" | 3/8" | 3/16" | 5 1/4" | 2,500 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
| 12" | 4" | 1 1/2" | 3/8" | 3/16" | 4 1/4" | 3,000 | Keyway, Set Screw | 2 | Yes | -20° to 120° | 85A (Hard) Red | 00000000 | 000000 |
Abrasion-Resistant Rollers
These urethane rollers are nonmarring and wear resistant. Mount them directly onto your shaft or build a custom roller by adding your own hub. Rollers with steel insert have a retaining ring groove for securing a ball bearing.
For technical drawings and 3-D models, click on a part number.
Roller | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Temperature Range, ° F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Insert | |||||||
| 1 1/2" | 1 1/4" | 7/8" | Press Fit | -65° to 200° | 0000000 | 000000 | |
| 2" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 2 1/2" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 4" | 29/32" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
| 4" | 1 15/16" | 1 1/4" | Press Fit | -65° to 200° | 0000000 | 00000 | |
Abrasion-Resistant Low-Profile Drive Rollers
The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots. Also known as contact wheels and feed rollers, drive rollers spin in unison with a shaft or stud to transmit power. The urethane surface is nonmarring and wear resistant.
For technical drawings and 3-D models, click on a part number.
Roller | Set Screws | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | No. Required | Included | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Aluminum Hub | |||||||||
| 3/8" | 1/4" | 1/8" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 000000 | |
| 1/2" | 1/4" | 3/16" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 3/16" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 1/4" | Set Screw | 1 | Yes | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/4" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 1/4" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 1/4" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 1/4" | 3/4" | 5/16" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 1/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 1 5/8" | 3/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 1/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2" | 3/4" | 3/8" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 3/8" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
| 2 1/2" | 1" | 1/2" | Set Screw | 2 | Yes | -40° to 180° | 0000000 | 00000 | |
Abrasion-Resistant Idler Rollers
These urethane rollers are nonmarring and wear resistant. Commonly found in conveyor systems and printing equipment, they spin freely on a shaft or stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia. | Shaft Mount Type | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with SAE 841 Bronze Bearing | ||||||||||
| 3/8" | 1/4" | 1/8" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 000000 | |
| 3/8" | 3/8" | 1/8" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 1/8" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/4" | 3/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 1/8" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1/2" | 1/2" | 3/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 1/4" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 5/8" | 5/8" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 3/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/8" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 3/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 1/2" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 3/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 3/4" | 3/4" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 1/2" | 5/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 3/4" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 3/4" | 5/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 1" | 1/4" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
| 1" | 1" | 5/16" | Press Fit | Plain | Lubricated | Chemlube SAE30 AM #1 | -40° to 180° | 0000000 | 00000 | |
Abrasion-Resistant Threaded Idler Rollers
These urethane rollers are nonmarring and wear resistant. Commonly found in conveyor systems and printing equipment, they spin freely on an included stud to position and guide work.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Includes | Choose a Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Stud | |||||||||||||
| 1 1/2" | 1 1/4" | 5/16" | 5/8" | 5/16"-18 | 1/2" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 000000 | |
| 2" | 29/32" | 1/2" | 1 1/8" | 1/2"-13 | 1" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
| 2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
| 2 1/2" | 29/32" | 1/2" | 1 1/8" | 1/2"-13 | 1" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
| 2 1/2" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
| 4" | 29/32" | 1/2" | 1 1/8" | 1/2"-13 | 1" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 000000 | 00000 | |
| 4" | 1 15/16" | 1/2" | 1 3/8" | 1/2"-13 | 1 1/8" | Ball | Lubricated | Tena-Film #2500-2-ST | -65° to 200° | Mounting Hardware | 0000000 | 00000 | |
Abrasion-Resistant One-Way-Locking
Threaded Idler/Drive Rollers
These urethane rollers spin freely in one direction and lock to transmit power in the other. They are nonmarring and wear resistant. Idler direction is clockwise when facing the roller end.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Bearing Type | Lubrication | Lubricant | Temperature Range, °F | Durometer (Hardness Rating) | Each | |
Urethane Roller with Steel Stud | ||||||||||||
| 1 1/2" | 1 1/4" | 5/16" | 11/16" | 5/16"-18 | 1/2" | Needle Roller | Lubricated | Aeroshell #14 | -65° to 200° | 60A (Medium) Blue-Green | 0000000 | 000000 |
| 2" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -65° to 200° | 60A (Medium) Blue-Green | 0000000 | 00000 |
| 4" | 1 15/16" | 1/2" | 1 1/4" | 1/2"-13 | 3/4" | Needle Roller | Lubricated | Aeroshell #14 | -65° to 200° | 60A (Medium) Blue-Green | 0000000 | 00000 |