Connect additional USB ports to your computer. These hubs can run off a computer’s power. USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

Hubs with connections that meet USB standard 2.0 allow for transmission speeds of up to 480 Mbps.

Hubs with connections that meet USB standard 3.1 Gen 1 or USB standard 3.2 Gen 1 allow for transmission speeds of up to 5 Gbps. Those with audio/data/video applications have one connection each for DisplayPort, HD15, and HDMI cables, so you can connect your computer or laptop to up to three monitors. Mac OS devices will only extend data to one monitor; the other monitors will mirror data from the first. To protect against theft, these hubs also accept your computer’s security cable.

Hubs with connections that meet USB standard 3.2 Gen 2 allow for transmission speeds of up to 10 Gbps.

Hubs with a 120 volt AC power adapter can be plugged into an outlet.

Bring USB connections closer to where you need them. Power these hubs using the included DC terminal block or by connecting to a computer. They protect against data loss and damage from electrostatic discharge (ESD). USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

USB 2.0 hubs transmit data at speeds up to 480 Mbps.

USB 3.2 Gen 1 hubs transmit data at speeds up to 5 Gbps.

USB 3.2 Gen 2 hubs transmit data at speeds up to 10 Gbps.

CE marked hubs meet European safety, health, and environmental standards.

Extend the reach of USB devices. Run an Ethernet cord (sold separately) from the transmitter to the receiver. USB ports are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard.

Charge mobile devices without an adapter. Receptacles have two USB ports to connect smartphones and tablet computers. The NEMA slots have internal shutters to prevent the insertion of foreign objects and accidental contact with power. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Charge up to four mobile devices at once. It automatically recognizes the charging requirements of a device to maximize charging speed. All fit standard GFCI wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure. Shielding blocks signal interference from nearby equipment and devices. The higher the USB standard, the faster cords can transmit data. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with a socket mount onto a panel.

Locking-pin cords are IP67 and NEMA 6P rated when mated or used with a cap (sold separately) on the socket end.

Screw-together cords are IP67 rated when mated or used with a cap (sold separately) on the socket end.

No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices. They have push-in terminals to quickly connect both solid and stranded wire.

To wire these chargers, press down on their internal clamp with a screwdriver or other narrow tool. Push your wire into the terminal, then remove the screwdriver.

Add an optional cap to protect these chargers when not in use.

Label holders (sold separately) snap onto the front of the chargers.

For technical drawings and 3-D models, click on a part number.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices. Backward compatible, all work with cords and connectors that meet the same or lower USB standard.

Shielded cords protect against signal interference in environments with low-to-moderate interference such as labs, storage facilities, and offices.

Cords with an external housing thread screw into your panel and don’t require fasteners to mount.

Add a cap to protect adapters when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access adapters from any angle. IP40-rated caps have a locking mechanism for extra security.

Label holders snap onto the front of adapters.

For technical drawings and 3-D models, click on a part number.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

Use outlet strips with USB ports to charge mobile devices. 90° elbow plugs fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

Outlet strips with 90° and 360° outlet orientation accommodate large plugs. The face of 360° outlets rotate a full circle.

Surge suppression outlet strips protect against damage from voltage spikes. Surge rating indicates how much energy the outlet strip can absorb before it needs to be replaced; the higher the number, the better the protection.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface. The outlets have internal shutters to prevent the insertion of foreign objects. These outlet strips have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery or in areas where space is tight. The plug also has an outlet on the back to connect equipment. Use the USB ports to charge mobile devices.