Material Material |
|---|
|
Connection Style Connection Style |
|---|
 |
| Socket Connect |
 |
| Threaded |
 |
| Flanged |
For Use With For Use With |
|---|
|
For Pipe Material For Pipe Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
Threading Threading |
|---|
 |
| Threaded on Both Ends |
 |
| Unthreaded |
Length Length |
|---|
Socket Depth Socket Depth |
|---|
|
|
|
Maximum Pressure Maximum Pressure |
|---|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
UV-Resistant Standard-Wall PVC Pipe Fittings for Water
- For Use With: Drinking Water, Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784, NSF/ANSI 61
- Pipe Nipples and Pipe: Use Schedule 40 PVC Plastic
Use these fittings in outdoor environments—the material has an additive that protects against the damaging effects of ultraviolet light. Fittings meet NSF/ANSI Standard 61 for drinking water. Also known as Schedule 40 fittings, they are typically used in residential and commercial low-pressure plumbing and water supply applications. They are PVC, which has good corrosion resistance. Fittings meet ASTM D1784 specifications and testing requirements for material quality.
Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
Pipe Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Schedule | OD | ID | Wall Thick. | Socket Depth | Color | Each | |
| 3/4 | 1/2 | 40 | 1 3/64" | 0.824" | 0.113" | 1 3/32" | Beige | 0000000 | 00000 |
| 1 | 3/4 | 40 | 1 5/16" | 1.049" | 0.133" | 1 3/16" | Beige | 0000000 | 0000 |
| 1 1/2 | 1 | 40 | 1 29/32" | 1.61" | 0.145" | 1 7/16" | Beige | 0000000 | 0000 |
| 2 | 1 | 40 | 2 3/8" | 2.067" | 0.154" | 1 3/16" | Beige | 0000000 | 0000 |
| 2 | 1 1/2 | 40 | 2 3/8" | 2.067" | 0.154" | 1 3/8" | Beige | 0000000 | 0000 |
| Pipe Cement | 00000000 | Each | 00000 |
UV-Resistant Standard-Wall PVC Pipe for Water
- For Use With: Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784
- Fittings: Use Schedule 40 PVC Plastic
Made with an additive that protects against the damaging effects of ultraviolet light, this pipe won’t degrade in outdoor environments. Also known as Schedule 40 pipe, it’s typically used in low-pressure residential and commercial plumbing and water supply applications. Pipe is PVC, which has good corrosion resistance. Connect to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld). Pipe meets ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | OD | ID | Wall Thick. | Color | Max. Pressure | Each | |
5ft. | |||||||
|---|---|---|---|---|---|---|---|
| 1/2 | 27/32" | 0.622" | 0.109" | Black | 300 psi @ 72° F | 0000000 | 000000 |
| 3/4 | 1 3/64" | 0.824" | 0.113" | Black | 240 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 1.049" | 0.133" | Black | 220 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | Black | 170 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 3/8" | 2.067" | 0.154" | Black | 140 psi @ 72° F | 0000000 | 00000 |
10ft. | |||||||
| 1/2 | 27/32" | 0.622" | 0.109" | Black | 300 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 3/64" | 0.824" | 0.113" | Black | 240 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 1.049" | 0.133" | Black | 220 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.61" | 0.145" | Black | 170 psi @ 72° F | 0000000 | 000000 |
| 2 | 2 3/8" | 2.067" | 0.154" | Black | 140 psi @ 72° F | 0000000 | 000000 |
| Pipe Cement | 00000000 | Each | 00000 |
UV-Resistant Thick-Wall PVC Pipe for Water
- For Use With: Water
- Maximum Temperature: 140° F
- Specifications Met: ASTM D1784
- Fittings: Use Schedule 80 PVC Plastic
- Flanges: Use Class 150 PVC Plastic
Use this pipe in outdoor environments–it’s made with an additive that protects against the damaging effects of ultraviolet light. Also known as Schedule 80 pipe, it has thicker, stronger walls than standard-wall pipe so it can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe is PVC, which has good corrosion resistance. Connect to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld). Pipe meets ASTM D1784 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | OD | ID | Wall Thick. | Color | Max. Pressure | Each | |
4ft. | |||||||
|---|---|---|---|---|---|---|---|
| 1/4 | 35/64" | 0.302" | 0.119" | Black | 570 psi @ 72° F | 0000000 | 000000 |
| 3/8 | 43/64" | 0.423" | 0.126" | Black | 460 psi @ 72° F | 0000000 | 00000 |
| 1/2 | 27/32" | 0.546" | 0.147" | Black | 420 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | Black | 340 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | Black | 320 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | Black | 240 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 3/8" | 1.939" | 0.218" | Black | 200 psi @ 72° F | 0000000 | 00000 |
8ft. | |||||||
| 1/4 | 35/64" | 0.302" | 0.119" | Black | 570 psi @ 72° F | 0000000 | 00000 |
| 3/8 | 43/64" | 0.423" | 0.126" | Black | 460 psi @ 72° F | 0000000 | 00000 |
| 1/2 | 27/32" | 0.546" | 0.147" | Black | 420 psi @ 72° F | 0000000 | 00000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | Black | 340 psi @ 72° F | 0000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | Black | 320 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | Black | 240 psi @ 72° F | 0000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | Black | 200 psi @ 72° F | 0000000 | 000000 |
| Pipe Cement | 00000000 | Each | 00000 |
Flame-Retardant PVDF Pipe Fittings for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Temperature Range: 40° to 280° F
- Specifications Met: ASTM D3222, UL 94V0
- Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
- Flanges: Use Class 150 PVDF Plastic
These fittings meet UL 94V0 for flame retardance, so they delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 fittings, they have thick walls for heavy duty chemical processing applications. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns. Fittings meet ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Unions separate into three pieces, so you can access your line without unthreading pipe connections.
| Pipe Size | Material | Color | O-Ring Material | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | Viton® Fluoroelastomer Rubber | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size (A) | Pipe Size (B) | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 3/4 | 1/2 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1/2 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 | 3/4 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | 1 1/2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
| Pipe Size | Material | Color | Max. Pressure | Each | |
NPT Threads | |||||
|---|---|---|---|---|---|
| 1/2 | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Flame-Retardant PVDF Pipe
Nipples and Pipe for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Max. Temperature: 280° F
- Specifications Met: ASTM D3222, UL 94V0
- Fittings: Use Schedule 80 PVDF Plastic
- Flanges: Use Class 150 PVDF Plastic
Pipe meets UL 94V0 for flame retardance, so it delays the spread of flames to valuable equipment. It is PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Schedule 80 pipe, it has thick walls for heavy duty chemical processing applications. Pipe meets ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
To prevent leaks in threaded connections, apply a non-hardening, plastic-compatible sealant to the male threads. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
2" | ||||||||
|---|---|---|---|---|---|---|---|---|
NPT Threads | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 00000 |
4" | ||||||||
NPT Threads | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 00000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 00000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 140 psi @ 72° F | 00000000 | 00000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |
Connect unthreaded pipe to unthreaded female socket-connect fittings using a primer and cement (also known as solvent weld).
| Pipe Size | OD | ID | Wall Thick. | Material | Color | Max. Pressure | Each | |
2 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 130 psi @ 72° F | 00000000 | 000000 |
5 ft. | ||||||||
| 1/2 | 27/32" | 0.546" | 0.147" | PVDF Plastic | Red | 290 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 3/64" | 0.742" | 0.154" | PVDF Plastic | Red | 230 psi @ 72° F | 00000000 | 000000 |
| 1 | 1 5/16" | 0.957" | 0.179" | PVDF Plastic | Red | 210 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | 1 29/32" | 1.5" | 0.2" | PVDF Plastic | Red | 160 psi @ 72° F | 00000000 | 000000 |
| 2 | 2 3/8" | 1.939" | 0.218" | PVDF Plastic | Red | 130 psi @ 72° F | 00000000 | 000000 |
Flame-Retardant PVDF Pipe Flanges for Chemicals
- For Use With: Chlorine, Salt Water, Solvents
- Temperature Range: 40° to 280° F
- Specifications Met: ASTM D3222, UL 94V0
- Pipe Nipples and Pipe: Use Schedule 80 PVDF Plastic
- Fittings: Use Schedule 80 PVDF Plastic
Flanges meet UL 94V0 for flame retardance to delay the spread of flames to valuable equipment. They are made of PVDF (polyvinylidene fluoride), which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Class 150 flanges, they have thick, strong walls for heavy duty chemical processing applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. When connecting to pipe, apply a non-hardening, plastic-compatible sealant to the male threads to prevent leaks. Tape or sealants with PTFE are not recommended for plastic-to-plastic threaded connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the flange, then wrench-tighten one to two turns. Flanges meet ASTM D3222 specifications and testing requirements for material quality.
Warning: Never use plastic pipe flanges and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flanged Connection Surface | Flange OD | For Bolt Dia. | Bolt Hole Dia. | Number of Bolt Holes | Bolt Circle Dia. | Material | Color | Max. Pressure | Each | |
Fixed Flange, Female Threaded × Flanged | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Threads | |||||||||||
| 1/2 | Flat | 3 1/2" | 1/2" | 5/8" | 4 | 2 5/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 3/4 | Flat | 3 7/8" | 1/2" | 5/8" | 4 | 2 11/16" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 00000 |
| 1 | Flat | 4 1/4" | 1/2" | 9/16" | 4 | 4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 1 1/2 | Flat | 5" | 1/2" | 5/8" | 4 | 3 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| 2 | Raised | 6" | 5/8" | 3/4" | 4 | 4 3/4" | PVDF Plastic | Red | 150 psi @ 72° F | 00000000 | 000000 |
| Non-Hardening Thread Sealant (8-oz. Brush-Top Can) | 000000 | Each | 000000 |