At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%. They are commonly used in laboratories and testing applications. These transmitters, also known as transducers, convert vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor vacuum or control equipment. As vacuum decreases, the output signal from the transmitter will increase. For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's vacuum range and output signal. Transmitters will only provide accurate readings within the rated vacuum range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn't lose signal over long distances and isn't affected by electrical interference from other devices.

Monitor and control equipment in food-processing and pharmaceutical plants—these transmitters convert vacuum into electrical signals for receiving devices and have a 3-A certified sanitary design. They automatically compensate for vibration and temperature changes, saving you the effort of programming manual corrections. They’re rated IP66 and NEMA 4X for protection from dust and water jets, and made of 316 stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. A highly polished surface and continuously welded seams leave no crevices for bacteria to grow. They connect to sanitary quick-clamp fittings—also known as tri-clamp fittings—that are easily assembled for regular cleaning.

Also known as transducers, these transmitters are commonly used with remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Use the keypad to set the vacuum range, choose the unit of measure, and zero the display. Transmitters will only provide accurate readings within the rated vacuum range. Maximum pressure is the greatest spike in pressure they can withstand without damage.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

With an accuracy of ±0.25%, use these transmitters in applications that require highly accurate measurement of both pressure and vacuum, such as activating vacuum pumps. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. As pressure increases, the output signal from the transmitter will increase. For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the pressure range and output signal of the transmitter. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Monitor and control vacuum pumps, air compressors, and hydraulics. These transmitters convert both pressure and vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls. As pressure increases, the output signal from the transmitter will increase. For your receiving device to interpret the signal from the transmitter, you will need to calibrate it for the transmitter's pressure range and output signal. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage. All transmitters are rated IP67 and NEMA 4X for use in washdown and corrosive environments.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. Use the keypad to set the pressure range, choose the unit of measure, and zero the transmitter. Transmitters convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage. All transmitters meet IP66 and NEMA 4X for use in washdown environments and have a hastelloy diaphragm to resist harsh chemicals.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.

Designed for sanitary environments, these transmitters automatically compensate for error in vacuum and pressure measurements caused by vibration and temperature fluctuations, so you don’t need to program corrections into your receiving device. They’re 3-A certified for use in sanitary facilities such as food, pharmaceutical, and biotech plants. Transmitters have IP66 and NEMA 4X ratings as protected from dust and high-pressure jets of water, and are made of corrosion-resistant stainless steel, so they won’t be damaged by frequent washdowns with harsh cleaners. A highly-polished surface with continuously welded seams leaves no room for bacteria to grow. They connect to sanitary quick-clamp fittings—also known as tri-clamp fittings—which disassemble easily for frequent cleaning.

Also known as transducers, these transmitters convert pressure and vacuum to an electrical signal that’s sent to devices such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment. Use the keypad to set the pressure range, choose the unit of measure, and zero the reading. Transmitters will only provide accurate readings within the rated pressure range. Maximum pressure is the maximum spike in pressure a transmitter can withstand without damage.

These transmitters connect using two wires to send a 4-20mA current output. The same wire is used to send a signal to the receiver and to power the transmitter. Current doesn’t lose signal over long distances and isn’t affected by electrical interference from other devices.