Often found in tanks that are frequently washed down, these float valve bodies are 316 stainless steel, so they resist corroding from harsh cleaners. To create custom float valves, combine these valve bodies with floats and rods. Thread them onto pipe to direct water to a specific location. They’re frequently used to send water to the bottom of a tank to limit splashing and disruptions at the surface level. When the valve opens and closes, the plunger rotates freely. This means the internal seal wears evenly, extending the life of the valve body.

Valve bodies with a Teflon® PTFE seal withstand higher temperatures than those with a Viton® fluoroelastomer seal.

For technical drawings and 3-D models, click on a part number.

Safe for use in drinking water systems, these float valve bodies meet NSF/ANSI 61 standards. Combine them with rods and floats to create custom float valves. They’re made of PVC, so they’re a lightweight alternative to metal valve bodies. With a nonrotating plunger, they maintain a tight seal even in turbulent water, such as in mixing tanks and tanks with boiling water.

Float valve bodies with a flow-adjustment lever have two flow setpoints, so you can adapt the flow rate to match system requirements.

For technical drawings and 3-D models, click on a part number.

Automatically or manually start and stop flow in your line with these valve bodies, which attach to your actuator. They have a full port, so they don’t restrict flow. All meet standard ISO 5211 mounting dimensions. Use valve stem adapters to mount to valve actuators with a larger stem opening.

316 stainless steel valve bodies have excellent corrosion resistance.

Three-piece valve bodies are easy to maintain because you can take them apart without removing them from your line.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.