About On/Off Valves
More
About Precision Flow-Adjustment Valves
More
Compact Threaded On/Off Valves
Install these low-profile valves in tight spots.
Chrome-plated brass valves are more corrosion resistant than brass and bronze valves.
Short lever handles, T-handles, and screwdriver-operated handles resist accidental movement when snagged or bumped.
Screwdriver-operated valves require a slotted screwdriver (not included) to open and close.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Air, Water
- Seal Material: Fluoroelastomer Rubber
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
NPT Female × NPT Female | |||||||
---|---|---|---|---|---|---|---|
1/8 | 3 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 000000 |
1/4 | 3.5 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 00000 |
3/8 | 3.6 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 00000 |
1/2 | 4.8 | 450 psi @ 100° F | 0° to 200° | 29.9 | 2 1/8" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||
1/8 | 3 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 00000 |
1/4 | 3.5 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 00000 |
3/8 | 3.6 | 450 psi @ 100° F | 0° to 200° | 29.9 | 1 11/16" | 0000000 | 00000 |
1/2 | 4.8 | 450 psi @ 100° F | 0° to 200° | 29.9 | 2 1/8" | 0000000 | 00000 |
On/Off Valves with Push-to-Connect Fittings
Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Screwdriver-operated valves resist accidental movement when snagged or bumped. They require a slotted screwdriver (not included) to open and close.
Standard-port valves slightly restrict flow.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Air, Water
- Seal Material:
Push to Connect × Push to Connect: EPDM Rubber
BSPP Male × Push to Connect: Buna-N Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | Each | |
Black Nylon Plastic Body | |||||||||
---|---|---|---|---|---|---|---|---|---|
Push to Connect × Push to Connect | |||||||||
__ | 5/32" | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 000000 |
__ | 1/4" | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 00000 |
__ | 5/16" | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 00000 |
__ | 3/8" | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2 5/8" | 0000000 | 00000 |
__ | 4mm | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 00000 |
__ | 6mm | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 00000 |
__ | 8mm | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2" | 0000000 | 00000 |
__ | 10mm | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | 2 5/8" | 0000000 | 00000 |
__ | 12mm | Not Rated | 145 psi @ 175° F | 0° to 175° | 28 | Standard | __ | 0000000 | 00000 |
BSPP Male × Push to Connect | |||||||||
1/8 | 6mm | Not Rated | 145 psi @ 175° F | 0° to 175° | Not Rated | Standard | 2 7/16" | 0000000 | 00000 |
1/4 | 8mm | Not Rated | 145 psi @ 175° F | 0° to 175° | Not Rated | Standard | 2 3/8" | 0000000 | 00000 |
3/8 | 10mm | Not Rated | 145 psi @ 175° F | 0° to 175° | Not Rated | Standard | 2 7/8" | 0000000 | 00000 |
1/2 | 12mm | Not Rated | 145 psi @ 175° F | 0° to 175° | Not Rated | Standard | 2" | 0000000 | 00000 |
Compact Precision Flow-Adjustment Valves with Barbed Fittings
- Valve Type: Needle
- For Use With: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: Buna-N Rubber
With a low-profile body and a narrow port-to-port length, these valves fit in tight spots. Barbs grip onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have metal-to-metal seats that resist temperature fluctuations.
Screwdriver-operated valves require a slotted screwdriver (not included) to open and close.
303 stainless steel valves are more corrosion resistant than nickel-plated brass valves.
For technical drawings and 3-D models, click on a part number.