Vented Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Shaft Type

Material

Thread Size

Performance

Specifications Met

Double Shear Breaking Strength

Minimum Hardness

Hardness

REACH

RoHS

DFARS Specialty Metals

Steel Grade

Export Control Classification Number (ECCN)

Thread Pitch

Passivation

221 Products

Shaft Type

Flat

Create a vent for easier installation in blind holes

140 products

Spiral

Vent air like flat-shaft pins but hold more securely

85 products

Performance

High Strength

Won't bend or break from stress and vibration

90 products

Corrosion Resistant

Resist rust in wet and outdoor environments

102 products

Vented Pull-Out Dowel Pins

Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.

Flat Shaft

The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	00000


				1"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				1 3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000


						1"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								3"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000




										5/8" Diameter

		1 1/2"								0.0001" to 0.0003"	1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000
		3"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000


				3"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000




										1" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	000000000	00000


										3"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	000000000	00000
										4"	0.0001" to 0.0003"	5/16"-18	102,000	Rockwell C47	ASME B18.8.2	000000000	00000




										16 mm Diameter

										32 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000


										40 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
										50 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
										60 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
										70 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
										80 mm	0.007 mm to 0.018 mm	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	00000


								Spring Steel







												6 mm Diameter

												16 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000


												18 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
												20 mm	0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
24 mm												0.004 mm to 0.012 mm	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
28 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
30 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
36 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
40 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
50 mm	0.004 mm to 0.012 mm											M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000




												8 mm Diameter

												20 mm	0.006 mm to 0.015 mm	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000


		24 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		28 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		30 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		36 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		40 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		50 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		60 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
		70 mm	0.006 mm to 0.015 mm									M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000




				10 mm Diameter

				24 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000


				28 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
				30 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
				36 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
				40 mm	0.006 mm to 0.015 mm							M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
				50 mm	0.006 mm to 0.015 mm	M6 × 1 mm						Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
				60 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	000000000	0000
				70 mm	0.006 mm to 0.015 mm	M6 × 1 mm	Not Rated					Rockwell C52	DIN 7979D-m6	000000000	0000




						12 mm Diameter

						24 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000


						30 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
						36 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
						40 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
						45 mm	0.007 mm to 0.018 mm					M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
						50 mm	0.007 mm to 0.018 mm	M6 × 1 mm				24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
						60 mm	0.007 mm to 0.018 mm	M6 × 1 mm	24,000			Rockwell C52	DIN 7979D-m6	000000000	0000


						18-8 Stainless Steel







										1/4" Diameter

										3/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000


										1"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/4"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/2"	0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
1 3/4"										0.0001" to 0.0003"	8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
2 1/2"	0.0001" to 0.0003"									8-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000




										5/16" Diameter

										3/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000


										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	0000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000




										3/8" Diameter

										1"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000


										1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										1 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										2 1/2"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										3"	0.0001" to 0.0003"	10-32	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
										3"	0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000




							5/8" Diameter

							1 1/2"				0.0001" to 0.0003"	1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000


							2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000
							3"	0.0001" to 0.0003"	1/4"-20		Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000




									3/4" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	ASME B18.8.2	000000000	00000




									1" Diameter

									2"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	—	000000000	00000


									3"		0.0001" to 0.0003"	5/16"-18	Not Rated	Rockwell C47	—	000000000	00000




												4 mm Diameter

		16 mm										0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


		20 mm	0.004 mm to 0.015 mm									M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000




												5 mm Diameter

												10 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


												24 mm	0.004 mm to 0.015 mm	M3 × 0.5 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000




												6 mm Diameter

												16 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


												24 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
												30 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
												36 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
												40 mm	0.004 mm to 0.015 mm	M4 × 0.7 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000




													8 mm Diameter

										16 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


										20 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
										24 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
										30 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
										40 mm			0.006 mm to 0.015 mm	M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
							50 mm			0.006 mm to 0.015 mm			M5 × 0.8 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
							60 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
							100 mm	0.006 mm to 0.015 mm		M5 × 0.8 mm			101,000	Rockwell C18	DIN 7979C-m6	000000000	00000




										10 mm Diameter

										20 mm			0.006 mm to 0.015 mm	M6 × 1 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


40 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
60 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
80 mm	0.006 mm to 0.015 mm									M6 × 1 mm			101,000	Rockwell C18	DIN 7979C-m6	000000000	00000




										12 mm Diameter

									24 mm	0.007 mm to 0.018 mm			M6 × 1 mm	101,000	Rockwell C18	DIN 7979C-m6	000000000	00000


									40 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
									50 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	000000000	00000
									80 mm	0.007 mm to 0.018 mm	M6 × 1 mm		101,000	Rockwell C18	DIN 7979C-m6	000000000	00000

Pin Removal Tools

		Each
Puller Handle	000000000	000000
Tip for 3/16"-5/8" (6-12 mm) Diameter Pin	000000000	00000
Tip for 3/4"-1-1/2" (13-20 mm) Diameter Pin	000000000	00000
Extension (5 1/2 Overall Length)	000000000	00000

Spiral Shaft

For a more secure hold under vibration than flat-shaft pins, the spiral makes 360° contact with the hole.

	Lg.	Dia. Tolerance	Thread Size	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met		Each
High-Strength Alloy Steel







				1/4" Diameter

				3/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	00000


				1"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				1 1/4"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				1 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000
				2 1/2"	0.0001" to 0.0003"	8-32	6,400	Rockwell C47	ASME B18.8.2	000000000	0000




						5/16" Diameter

						3/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000


						1"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						1 1/4"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						1 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000
						2 1/2"	0.0001" to 0.0003"	10-32	10,000	Rockwell C47	ASME B18.8.2	000000000	0000




								3/8" Diameter

								1"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000


								1 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								1 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								1 3/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2 1/4"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								2 1/2"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000
								3"	0.0001" to 0.0003"	10-32	14,300	Rockwell C47	ASME B18.8.2	000000000	0000




										1/2" Diameter

										1"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000


										1 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										1 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										1 3/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										2 1/4"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										2 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										3"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000
										3 1/2"	0.0001" to 0.0003"	1/4"-20	25,500	Rockwell C47	ASME B18.8.2	000000000	0000




										5/8" Diameter

		1 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000


		2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000
		2 1/4"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	0000
		2 1/2"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	00000
		3"	0.0001" to 0.0003"							1/4"-20	39,000	Rockwell C47	ASME B18.8.2	000000000	00000




										3/4" Diameter

				2"						0.0001" to 0.0003"	5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000


				2 1/2"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000
				3"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000
				4"	0.0001" to 0.0003"					5/16"-18	57,000	Rockwell C47	ASME B18.8.2	000000000	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	102,000	Rockwell C47	ASME B18.8.2	000000000	00000


						3"	0.0001" to 0.0003"			3/8"-16	102,000	Rockwell C47	ASME B18.8.2	000000000	00000
						4"	0.0001" to 0.0003"			3/8"-16	102,000	Rockwell C47	ASME B18.8.2	000000000	00000


						18-8 Stainless Steel







												1/4" Diameter

												3/4"	0.0001" to 0.0003"	8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000


								1"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
								1 1/4"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
								1 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
								2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
								2 1/2"	0.0001" to 0.0003"			8-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000




												5/16" Diameter

												3/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000


												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
1 1/4"												0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
1 1/2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
2"	0.0001" to 0.0003"											10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000




												3/8" Diameter

												1"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000


												1 1/4"	0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		1 1/2"										0.0001" to 0.0003"	10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		1 3/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		2 1/4"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		2 1/2"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
		3"	0.0001" to 0.0003"									10-32	Not Rated	Not Rated	ASME B18.8.2	000000000	00000




												1/2" Diameter

				1"								0.0001" to 0.0003"	1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000


				1 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
				1 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
				1 3/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
				2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
				2 1/4"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000
				2 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
				3"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
				3 1/2"	0.0001" to 0.0003"							1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000




						5/8" Diameter

						1 1/2"	0.0001" to 0.0003"					1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	0000


						2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
						2 1/4"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
						2 1/2"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
						3"	0.0001" to 0.0003"			1/4"-20	Not Rated	Not Rated	ASME B18.8.2	000000000	00000




										3/4" Diameter

										2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	000000000	00000


								2 1/2"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
								3"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	000000000	00000
								4"	0.0001" to 0.0003"	5/16"-18	Not Rated	Not Rated	ASME B18.8.2	000000000	00000




										1" Diameter

										2"	0.0001" to 0.0003"	3/8"-16	Not Rated	Not Rated	—	000000000	00000


3"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	000000000	00000
4"	0.0001" to 0.0003"									3/8"-16	Not Rated	Not Rated	—	000000000	00000

Pin Removal Tools