Thread Type Thread Type |
---|
|
Connection Style Connection Style |
---|
![]() | Threaded |
Gender Gender |
---|
![]() | Male |
Body Material Body Material |
---|
|
For Use With For Use With | Show |
---|
|
For Use With For Use With | Hide |
---|
|
|
System of Measurement System of Measurement |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Removes Particle Size Down To Removes ParticleSize Down To |
---|
|
Connection Type Connection Type |
---|
![]() | Pipe |
Maximum Flow Rate Maximum Flow Rate |
---|
|
For Reducing For Reducing |
---|
|
Drive Style Drive Style |
---|
|
Diameter Diameter |
---|
|
Filter Material Filter Material |
---|
|
Inlet Pipe Size Inlet Pipe Size |
---|
|
Set Pressure Set Pressure |
---|
|
Screen Material Screen Material |
---|
|
Shape Shape |
---|
![]() | Straight |
More
More
More
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.
Breather vents with splash guard are good for containers that are often filled and drained; they have a guard that prevents oil from splashing out of the vent hole.
For technical drawings and 3-D models, click on a part number.
Style | Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Features | Each | |
NPT Male | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Steel Body and Fitting | |||||||||||
B | 1/8 | Not Rated | 125 | 400° | 3/4" | __ | Oil | __ | Splash Guard | 0000000 | 00000 |
B | 3/8 | Not Rated | 125 | 400° | 1" | __ | Oil | __ | Splash Guard | 0000000 | 0000 |
B | 1/2 | Not Rated | 125 | 400° | 1 1/8" | __ | Oil | __ | Splash Guard | 0000000 | 00000 |
Polyamide Plastic Body and Fitting | |||||||||||
C | 1/4 | Not Rated | Not Rated | 210° | 1 9/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
C | 3/8 | Not Rated | Not Rated | 210° | 1 3/4" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
C | 1/2 | Not Rated | Not Rated | 210° | 1 13/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
C | 3/4 | Not Rated | Not Rated | 210° | 1 13/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering. These breather vents allow you to add a filling port to your hydraulic tank while protecting against excess pressure and vacuum. Use them to stop debris from entering your tank. Breather vents mount on top of standard tank openings with included hardware. Padlock is not included.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Opening Dia. | Ht. | For Use With | Cap | Screen | Mount Type | Number of Bolt Holes | Bolts Included | Removes Particle Size Down To, microns | For Max. Padlock Shackle Dia. | Each | |
2 1/8" | 5 1/16" | Air, Oil | Steel | 304 Stainless Steel | Flange | 6 | Yes | 40 | 3/8" | 0000000 | 000000 |
Due to their small size, these valves are often installed on tanks in low-clearance areas. They begin opening at the set pressure. Nylon valves fully open at about 10% over the set pressure and steel valves fully open at about 50% over the set pressure. Valves begin closing as pressure drops and fully close when the system pressure is restored below the set pressure. All have a vent outlet to exhaust discharge directly. Set pressure is not adjustable.
For technical drawings and 3-D models, click on a part number.
Inlet | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|
Pipe Size | Location | Maximum Pressure, psi | Relief Port Location | Overall Ht. | Specifications Met | Set Pressure, psi | 1-9 | 10-Up | |
NPTF Male Inlet and Relief Vent | |||||||||
1/8 | Bottom | 25 | Top | 1/2" | MS35670 | 15 | 000000 | 00000 | 00000 |