For Use With For Use With |
---|
|
Body Material Body Material | Show |
---|
|
Fitting Material Fitting Material |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
Removes Particle Size Down To Removes ParticleSize Down To |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Height Height |
---|
Diameter Diameter |
---|
Maximum Flow Rate Maximum Flow Rate |
---|
|
Valve Type Valve Type |
---|
|
Minimum Noise Reduction Rating Minimum NoiseReduction Rating |
---|
|
|
Environmental Rating Environmental Rating |
---|
Environment Environment |
---|
|
|
More
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.
Breather vents with splash guard are good for containers that are often filled and drained; they have a guard that prevents oil from splashing out of the vent hole.
For technical drawings and 3-D models, click on a part number.
Style | Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Features | Each | |
NPT Male | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Polyamide Plastic Body and Fitting | |||||||||||
C | 1/4 | Not Rated | Not Rated | 210° | 1 9/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 00000 |
C | 3/8 | Not Rated | Not Rated | 210° | 1 3/4" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
C | 1/2 | Not Rated | Not Rated | 210° | 1 13/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
C | 3/4 | Not Rated | Not Rated | 210° | 1 13/16" | 1 11/16" | Air, Oil | 40 | Splash Guard | 0000000 | 0000 |
These breather vents withstand corrosion in damp environments. Use them to prevent excess vacuum and pressure in cylinders, gear boxes, and tanks and to block debris from entering equipment.
Polyethylene breather vents can be cleaned with mineral spirits.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Each | |
NPT Male | |||||||||
---|---|---|---|---|---|---|---|---|---|
Polyethylene Plastic Body and Fitting | |||||||||
1/8 | 1 scfm @ 100 psi | 100 | 150° | 7/16" | 1/2" | Air, Inert Gas | 100 | 0000000 | 00000 |
1/4 | 3 scfm @ 100 psi | 100 | 150° | 1/2" | 11/16" | Air, Inert Gas | 100 | 0000000 | 0000 |
3/8 | 9 scfm @ 100 psi | 100 | 150° | 11/16" | 15/16" | Air, Inert Gas | 100 | 0000000 | 0000 |
1/2 | 10 scfm @ 100 psi | 100 | 150° | 11/16" | 15/16" | Air, Inert Gas | 100 | 0000000 | 0000 |
3/4 | 20 scfm @ 100 psi | 100 | 150° | 1 1/8" | 1 1/2" | Air, Inert Gas | 100 | 0000000 | 0000 |
1 | 22 scfm @ 100 psi | 100 | 150° | 1 3/8" | 1 7/8" | Air, Inert Gas | 100 | 0000000 | 0000 |
These breather vents are rated NEMA 6 to withstand periodic submersion in water. Install them in enclosures to stop the buildup of pressure and vacuum and to prevent debris from entering equipment. Breather vents can be used with enclosures that are rated NEMA 4, 12, and 13 for washdown environments and splashing oil and coolant.
Vents with barbed connections fit unthreaded openings and are held in place by friction.
For technical drawings and 3-D models, click on a part number.
Thread Size | For Hole Size | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | O-Ring Material | Removes Particle Size Down To, microns | Features | Each | |
Threaded Metric Male | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Nylon Plastic Body and Fitting | |||||||||||
M3 | __ | 1.4 | 158° | 3/8" | 5/16" | Air | __ | 3 | __ | 0000000 | 000000 |
Polycarbonate Plastic Body and Fitting | |||||||||||
M16 | __ | 1.4 | 158° | 15/16" | 1 1/16" | Air | Buna-N Rubber | 3 | Mounting Nut | 0000000 | 00000 |
Barbed Male | |||||||||||
ABS Plastic Body and Fitting | |||||||||||
__ | 21/64" | 4 | 158° | 9/16" | 7/8" | Air | Silicone Rubber | 1 | __ | 0000000 | 0000 |
Add a filling port to your hydraulic tank while protecting against excess pressure and vacuum. Breather vents stop debris from entering your tank. Mount them on top of standard tank openings with included hardware.
For technical drawings and 3-D models, click on a part number.
For Opening Dia. | Max. Flow Rate | Max. Temp., °F | Ht. | For Use With | Screen Material | Mount Type | Number of Bolt Holes | Bolts Included | Removes Particle Size Down To, microns | Each | |
Nylon Plastic Body | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Nylon Plastic Cap | |||||||||||
2" | Not Rated | 195° | 5 3/4" | Air, Oil | Nylon Plastic | Flange | 6 | Yes | 40 | 0000000 | 000000 |
Vents | Replacement Screens | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Opening Ht. | For Opening Wd. | Max. Flow Rate, gpm | Max. Temp., °F | Ht. | Wd. | Dp. | For Use With | Screen Material | Mount Type | Number of Bolt Holes | Bolts Included | Removes Particle Size Down To, microns | Each | Each | ||
Nylon Plastic Body | ||||||||||||||||
Steel Cap | ||||||||||||||||
3 1/2" | 3" | 115 | Not Rated | 6 1/8" | 4 1/2" | 4" | Air, Oil | 304 Stainless Steel | Flange | 7 | Yes | 10 | 00000000 | 000000 | 0000000 | 00000 |
3 1/2" | 3" | 192 | Not Rated | 6 1/8" | 4 1/2" | 4" | Air, Oil | 304 Stainless Steel | Flange | 7 | Yes | 40 | 00000000 | 00000 | 0000000 | 0000 |
Keep moisture, dirt, and debris from entering your oil reservoirs. The silica gel inside these breather vents absorbs moisture from the air, preventing rust from forming inside your tanks. The gel changes from blue to pink as it becomes saturated, letting you know it needs to be replaced. A second filter blocks dust and other particles from getting inside. These breather vents allow air to flow in and out of your lubrication system, keeping excess vacuum or pressure from building up in cylinders, gear boxes, and tanks.
Breather vents with a plastic body are clear, so a quick glance will tell you if the gel is saturated. Unlike steel versions, which can be rebuilt, the entire unit must be replaced when fresh gel is needed. For washdown environments, select breather vents with check valves. These valves allow air to flow in and out, but close when liquids try to enter.
For technical drawings and 3-D models, click on a part number.
Pipe Size | For Tank Capacity, gal. | Max. Flow Rate | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Each | |
Nylon and Polycarbonate Plastic Body and Nylon Plastic Fitting | |||||||||
---|---|---|---|---|---|---|---|---|---|
3/8 | 1-2 | 4.5 scfm @ 1 psi | 200° | 4" | 2 1/2" | Air, Inert Gas | 3 | 0000000 | 000000 |
3/8 | 1-5 | 4 scfm @ 1 psi | 200° | 5 3/8" | 2 1/2" | Air, Inert Gas | 3 | 0000000 | 00000 |
1 | 5-200 | 16 scfm @ 1 psi | 200° | 6 1/8" | 4 1/8" | Air, Inert Gas | 3 | 0000000 | 00000 |
1 | 5-350 | 16 scfm @ 1 psi | 200° | 8 1/8" | 4 1/8" | Air, Inert Gas | 3 | 0000000 | 00000 |
1 | 5-500 | 16 scfm @ 1 psi | 200° | 10 1/8" | 4 1/8" | Air, Inert Gas | 3 | 0000000 | 00000 |
Pipe Size | For Tank Capacity, gal. | Max. Flow Rate | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Each | |
Nylon and Polycarbonate Plastic Body and Nylon Plastic Fitting | |||||||||
---|---|---|---|---|---|---|---|---|---|
1 | 1-400 | 27 scfm @ 1 psi | 200° | 4 11/16" | 5 11/16" | Air, Inert Gas | 3 | 0000000 | 0000000 |
1 | 1-600 | 26 scfm @ 1 psi | 200° | 6 7/16" | 5 11/16" | Air, Inert Gas | 3 | 0000000 | 000000 |
1 | 1-800 | 25 scfm @ 1 psi | 200° | 8 1/4" | 5 11/16" | Air, Inert Gas | 3 | 0000000 | 000000 |
1 | 1-1,000 | 24 scfm @ 1 psi | 200° | 10" | 5 11/16" | Air, Inert Gas | 3 | 0000000 | 000000 |
Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
Styles G and H have a tube stem that slides into tube fittings and collets to decrease noise from manifolds.
For technical drawings and 3-D models, click on a part number.
Style | For Tube ID | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Each | |
Tube Stem Polypropylene Plastic Fitting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
G | 1/4" | 52 scfm @ 100 psi | 145 | 140° | 2 3/4" | 3/4" | Air | Not Rated | 17-20 | 0000000 | 000000 |
G | 3/8" | 117 scfm @ 100 psi | 145 | 140° | 3 1/8" | 3/4" | Air | Not Rated | 17-20 | 0000000 | 00000 |
Tube Stem Polybutylene Plastic Fitting | |||||||||||
G | 6mm | 27 scfm @ 100 psi | 145 | 140° | 2 1/16" | 5/8" | Air | Not Rated | 17-20 | 0000000 | 0000 |
G | 8mm | 42 scfm @ 100 psi | 145 | 140° | 2 7/8" | 7/8" | Air | Not Rated | 17-20 | 0000000 | 00000 |
G | 10mm | 95 scfm @ 100 psi | 145 | 140° | 3 11/16" | 1" | Air | Not Rated | 17-20 | 0000000 | 00000 |
Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers. They’re often used in air-powered circuits to reduce noise and filter exhaust fumes.
For technical drawings and 3-D models, click on a part number.
Style | Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Each | |
NPT Male Nylon Plastic Fitting | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
C | 1/8 | 20 scfm @ 100 psi | 150 | 120° | 2 1/8" | Air | 250 | 17-20 | 0000000 | 00000 |
C | 1/4 | 20 scfm @ 100 psi | 150 | 120° | 2 1/4" | Air | 250 | 17-20 | 0000000 | 0000 |
C | 3/8 | 65 scfm @ 100 psi | 150 | 120° | 3 7/16" | Air | 250 | 17-20 | 0000000 | 0000 |
C | 1/2 | 70 scfm @ 100 psi | 150 | 120° | 3 9/16" | Air | 250 | 17-20 | 0000000 | 0000 |
These mufflers can be cleaned for an extended service life. Use them with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
Glass-filled polypropylene plastic mufflers can be disassembled for cleaning.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Filter Material | Each | ||
A | 1/8 | 13 scfm @ 100 psi | 150 | 150° | 1 3/16" | 1/2" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 00000 |
A | 1/8 | 33 scfm @ 100 psi | 150 | 150° | 1 3/16" | 1/2" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 1/4 | 24 scfm @ 100 psi | 150 | 150° | 1 1/2" | 11/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 1/4 | 60 scfm @ 100 psi | 150 | 150° | 1 1/2" | 11/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 3/8 | 128 scfm @ 100 psi | 150 | 150° | 2 5/8" | 15/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 3/8 | 51 scfm @ 100 psi | 150 | 150° | 2 5/8" | 15/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 1/2 | 150 scfm @ 100 psi | 150 | 150° | 2 5/8" | 15/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 1/2 | 60 scfm @ 100 psi | 150 | 150° | 2 5/8" | 15/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 3/4 | 195 scfm @ 100 psi | 150 | 150° | 5 13/16" | 1 1/2" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 3/4 | 78 scfm @ 100 psi | 150 | 150° | 5 13/16" | 1 1/2" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 0000 |
A | 1 | 220 scfm @ 100 psi | 150 | 150° | 6 5/8" | 1 7/8" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 00000 |
A | 1 | 88 scfm @ 100 psi | 150 | 150° | 6 5/8" | 1 7/8" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 00000 |
Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Choose a Filter Material | Each | ||
B | 1/8 | 75 scfm @ 100 psi | 150 | 175° | 2 3/8" | 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 000000 | |
B | 1/4 | 78 scfm @ 100 psi | 150 | 175° | 2 1/2" | 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
B | 3/8 | 98 scfm @ 100 psi | 150 | 175° | 3 1/2" | 1 3/8" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
B | 1/2 | 101 scfm @ 100 psi | 150 | 175° | 3 11/16" | 1 3/8" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
B | 3/4 | 115 scfm @ 100 psi | 150 | 175° | 5 5/8" | 1 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
B | 1 | 115 scfm @ 100 psi | 150 | 175° | 5 7/8" | 1 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 1/8 | 83 scfm @ 100 psi | 150 | 175° | 1 3/4" | 1 5/8" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 1/4 | 87 scfm @ 100 psi | 150 | 175° | 1 13/16" | 1 5/8" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 3/8 | 95 scfm @ 100 psi | 150 | 175° | 2 13/16" | 2" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 1/2 | 90 scfm @ 100 psi | 150 | 175° | 2 15/16" | 2" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 3/4 | 120 scfm @ 100 psi | 150 | 175° | 4 1/8" | 2 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 | |
C | 1 | 120 scfm @ 100 psi | 150 | 175° | 4 3/8" | 2 15/16" | Air Inert Gas | 75 | 20-30 | 0000000 | 00000 |
Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Filter Material | Each | ||
A | 10-32 | 0.7 scfm @ 100 psi | 150 | 150° | 15/16" | 5/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 00000 |
Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30-35 dB, a reduction that's equivalent to putting in earplugs.
Mufflers with pipe connections thread into NPT or metric threaded exhaust ports.
Mufflers with tube stem connections slide into tube fittings, such as push-to-connect tube fittings.
Pipe Size | Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Body Material | Noise Reduction Rating, dB | Each | |
NPT Male Polypropylene Plastic Fitting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
1/8 | __ | 28 scfm @ 72 psi | 145 | 140° | 15/16" | 7/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 00000 |
1/4 | __ | 105 scfm @ 72 psi | 145 | 140° | 1 3/4" | 5/8" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
1/4 | __ | 35 scfm @ 72 psi | 145 | 140° | 1 1/4" | 5/8" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
3/8 | __ | 176 scfm @ 72 psi | 145 | 140° | 2 5/16" | 13/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
1/2 | __ | 282 scfm @ 72 psi | 145 | 140° | 2 11/16" | 15/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
Metric Male Polypropylene Plastic Fitting | |||||||||||
__ | M5 | 14 scfm @ 72 psi | 145 | 140° | 5/8" | 1/4" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
For Tube ID | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Body Material | Noise Reduction Rating, dB | Each | |
Tube Stem Polypropylene Plastic Fitting | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/4" | 28 scfm @ 72 psi | 145 | 140° | 1 7/16" | 1 7/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 00000 |
3/8" | 106 scfm @ 72 psi | 145 | 140° | 2 5/16" | 2 5/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
6mm | 28 scfm @ 72 psi | 145 | 140° | 1 7/16" | 1 7/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
8mm | 106 scfm @ 72 psi | 145 | 140° | 1 13/16" | 1 13/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
10mm | 177 scfm @ 72 psi | 145 | 140° | 2 5/16" | 2 5/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
12mm | 177 scfm @ 72 psi | 145 | 140° | 2 7/8" | 2 5/16" | Air | Polypropylene Plastic | 30-35 | 0000000 | 0000 |
Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. Use them on loud equipment to filter exhaust fumes and reduce noise by 35-42 dB.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Each | |
NPT Male Polybutylene Plastic Fitting | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/4 | 106 scfm @ 100 psi | 145 | 140° | 2 1/2" | Air | 100 | 35-42 | 0000000 | 00000 |
3/8 | 176 scfm @ 100 psi | 145 | 140° | 3 5/16" | Air | 100 | 35-42 | 0000000 | 0000 |
1/2 | 283 scfm @ 100 psi | 145 | 140° | 3 3/4" | Air | 100 | 35-42 | 0000000 | 0000 |
Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. Use on air-powered drills and other loud equipment to filter exhaust fumes and reduce noise by 30-35 dB.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Each | |
NPT Male Polypropylene Plastic Fitting | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/8 | 100 | 158° | 1 9/16" | 5/8" | Air | 70 | 30-35 | 0000000 | 000000 |
1/4 | 100 | 158° | 1 15/16" | 3/4" | Air | 70 | 30-35 | 0000000 | 00000 |
3/8 | 100 | 158° | 2 1/2" | 1 1/16" | Air | 70 | 30-35 | 0000000 | 00000 |
1/2 | 100 | 158° | 3 1/4" | 1 1/4" | Air | 70 | 30-35 | 0000000 | 00000 |
These valves are made of corrosion-resistant materials for use in wet conditions and harsh environments. They eliminate air pockets to maintain consistent flow and prevent water surges that can damage equipment. All have a vented relief port to exhaust discharge directly.
Valve with a Buna-N seal is for use in heating and cooling systems.
Valve with an EPDM seal is for use in cooling systems only.
For excellent corrosion resistance in wet conditions and harsh environments, these valves have no metal parts. They eliminate air pockets to maintain consistent flow and prevent water surges that can damage equipment. All have a threaded relief port that can be attached to a drain line for remote discharge.
Inlet | Relief Port | |||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Location | Pipe Size | Location | Max. Pressure, psi | Temperature Range, °F | Overall Ht. | Each | |
NPT Female Inlet and Relief Port | ||||||||
PVC Body | ||||||||
1/2 | Bottom | 1/2 | Top | 150 | 32° to 140° | 3" | 00000000 | 000000 |
3/4 | Bottom | 3/4 | Top | 150 | 32° to 140° | 3 1/2" | 00000000 | 000000 |
1 | Bottom | 1 | Top | 150 | 32° to 140° | 3 7/8" | 00000000 | 00000 |
1 1/4 | Bottom | 1 1/4 | Top | 150 | 32° to 140° | 4 1/2" | 00000000 | 000000 |
2 | Bottom | 2 | Top | 150 | 32° to 140° | 5 3/4" | 00000000 | 000000 |