Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.

Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.

Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.

Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.

Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.

Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line.

Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35 dB.

Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dBA

Also known as thermostatic steam traps, these increase the efficiency of your radiator by venting cool air.

Also known as thermodynamic steam traps, these discharge condensate when close to steam temperature for minimal energy loss.

Also known as inverted-bucket steam traps, these provide near-continuous discharge to accommodate high condensate levels.

Use these vents to maintain consistent pressure as temperatures fluctuate by allowing air to flow through sealed enclosures.