Thread Type Thread Type | Show |
---|
|
Thread Size Thread Size |
---|
Body Material Body Material |
---|
|
Connection Style Connection Style |
---|
![]() |
Threaded |
Gender Gender |
---|
|
Fitting Material Fitting Material |
---|
|
Removes Particle Size Down To Removes ParticleSize Down To |
---|
|
Maximum Pressure Maximum Pressure |
---|
|
System of Measurement System of Measurement |
---|
|
Connection Type Connection Type |
---|
![]() | Pipe |
Drive Style Drive Style |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Maximum Flow Rate Maximum Flow Rate |
---|
|
Filter Construction Filter Construction |
---|
|
Environmental Rating Environmental Rating |
---|
O-Ring Material O-Ring Material |
---|
|
Environment Environment |
---|
|
|
More
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.
Style G has a slotted drive for installation with a screwdriver.
Style H has a Buna-N O-ring for extra protection against leaks.
For technical drawings and 3-D models, click on a part number.
Style | Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Each | |
UNF Male | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
316 Stainless Steel Body and Fitting | ||||||||||
G | 10-32 | 10 scfm @ 100 psi | 100 | 750° | 7/16" | 3/16" | Air, Inert Gas | 10 | 0000000 | 000000 |
Brass Body and Fitting | ||||||||||
A | 10-32 | 6 scfm @ 100 psi | 150 | 300° | 3/8" | __ | Air, Inert Gas | 90 | 0000000 | 0000 |
H | 10-32 | 1 scfm @ 100 psi | 125 | 200° | 7/16" | __ | Air, Inert Gas | 40 | 0000000 | 0000 |
These breather vents are rated NEMA 6 to withstand periodic submersion in water. Install them in enclosures to stop the buildup of pressure and vacuum and to prevent debris from entering equipment. Breather vents can be used with enclosures that are rated NEMA 4, 12, and 13 for washdown environments and splashing oil and coolant.
For technical drawings and 3-D models, click on a part number.
Thread Size | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | O-Ring Material | Removes Particle Size Down To, microns | Each | |
Threaded UNF Male | |||||||||
---|---|---|---|---|---|---|---|---|---|
Aluminum Body and Fitting | |||||||||
10-32 | 1.4 | 158° | 1/4" | 3/8" | Air | EPDM Rubber | 3 | 0000000 | 000000 |
Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
Styles E and F have a rubber O-ring for extra protection against leaks.
For technical drawings and 3-D models, click on a part number.
Style | Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Each | |
UNF Male Steel Fitting | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
A | 10-32 | 6 scfm @ 100 psi | 300 | 300° | 11/16" | Air, Inert Gas | 40 | 15-20 | 0000000 | 00000 |
UNF Male Brass Fitting | ||||||||||
E | 10-32 | 5 scfm @ 100 psi | 125 | 200° | 5/8" | Air, Inert Gas | 40 | 17-22 | 0000000 | 0000 |
F | 10-32 | 5 scfm @ 100 psi | 125 | 200° | 1 1/16" | Air, Inert Gas | 40 | 17-22 | 0000000 | 0000 |
UNF Male 303 Stainless Steel Fitting | ||||||||||
F | 10-32 | 5 scfm @ 100 psi | 300 | 300° | 1 1/16" | Air, Inert Gas | 40 | 17-22 | 0000000 | 00000 |
These mufflers can be cleaned for an extended service life. Use them with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
For technical drawings and 3-D models, click on a part number.
Thread Size | Max. Flow Rate | Max. Pressure, psi | Max. Temp., °F | Ht. | Dia. | For Use With | Removes Particle Size Down To, microns | Noise Reduction Rating, dB | Filter Material | Each | ||
A | 10-32 | 0.7 scfm @ 100 psi | 150 | 150° | 15/16" | 5/16" | Air, Inert Gas | 80 | 20-30 | Polyethylene Plastic | 0000000 | 00000 |