Vibration Damping Plates


Style 1, Threaded-Insert Mount	Style 2, Threaded-Insert Mount	Style 3, Threaded-Insert Mount	Style 4, Threaded-Insert Mount

Style 5, Threaded-Insert Mount	Style 6, Threaded-Insert Mount	Style 7, Unthreaded-Hole Mount	Style 8, Unthreaded-Hole Mount

Style 9, Unthreaded-Hole Mount	Style 10, Unthreaded-Hole Mount

These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.

Style 1—Threaded-Insert Mount

Style 1,

Threaded-Insert

Mount

The most common choice, these mounts absorb enough shock and vibration for most machinery.

Multipurpose Neoprene—Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

High-Temperature Silicone Rubber—These mounts handle temperatures about twice as high as natural rubber and neoprene. They also handle temperatures well below zero for the widest temperature range of any mount we offer.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			5/16"-18	50	0.12"	Not Rated	Not Rated	1"	1.2"	3.13"	1.75"	10 to 180	No	2	0.34"	2.38"	Steel	00000000	00000	00000	00000


			5/16"-18	80	0.12"	Not Rated	Not Rated	1"	1.2"	3.13"	1.75"	10 to 180	No	2	0.34"	2.38"	Steel	00000000	0000	0000	0000
			5/16"-18	110	0.12"	Not Rated	Not Rated	1"	1.2"	3.13"	1.75"	10 to 180	No	2	0.34"	2.38"	Steel	00000000	0000	0000	0000
			5/16"-18	160	0.12"	Not Rated	Not Rated	1"	1.2"	3.13"	1.75"	10 to 180	No	2	0.34"	2.38"	Steel	00000000	0000	0000	0000
			3/8"-16	130	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			3/8"-16	250	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			3/8"-16	350	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			3/8"-16	480	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			1/2"-20	130	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			1/2"-20	250	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000
			1/2"-20	350	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000


			1/2"-20	480	0.12"	Not Rated	Not Rated	1.12"	1.83"	3.75"	2.25"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	0000




					High-Temperature Silicone Rubber

					5/16"-18	35	0.2"	Not Rated	Not Rated	1"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000


					5/16"-18	35	0.4"	Not Rated	Not Rated	1.25"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	45	0.2"	Not Rated	Not Rated	1"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	45	0.4"	Not Rated	Not Rated	1.25"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	70	0.2"	Not Rated	Not Rated	1"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	70	0.4"	Not Rated	Not Rated	1.25"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	120	0.2"	Not Rated	Not Rated	1"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					5/16"-18	120	0.4"	Not Rated	Not Rated	1.25"	1.25"	3.13"	1.75"	-80 to 300	No	2	0.34"	2.38"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	135	0.25"	Not Rated	Not Rated	1.25"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	135	0.5"	Not Rated	Not Rated	1.75"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	170	0.25"	Not Rated	Not Rated	1.25"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000


					3/8"-16	170	0.5"	Not Rated	Not Rated	1.75"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	240	0.25"	Not Rated	Not Rated	1.25"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	240	0.5"	Not Rated	Not Rated	1.75"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	380	0.25"	Not Rated	Not Rated	1.25"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	380	0.5"	Not Rated	Not Rated	1.75"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	550	0.25"	Not Rated	Not Rated	1.25"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					3/8"-16	550	0.5"	Not Rated	Not Rated	1.75"	1.75"	3.88"	2.38"	-80 to 300	No	2	0.34"	3"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	250	0.25"	Not Rated	Not Rated	1.75"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	250	0.5"	Not Rated	Not Rated	2.88"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	525	0.25"	Not Rated	Not Rated	1.75"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000


					1/2"-13	525	0.5"	Not Rated	Not Rated	2.88"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	750	0.25"	Not Rated	Not Rated	1.75"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	750	0.5"	Not Rated	Not Rated	2.88"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	1,100	0.25"	Not Rated	Not Rated	1.75"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000
					1/2"-13	1,100	0.5"	Not Rated	Not Rated	2.88"	2.5"	5.5"	3.38"	-80 to 300	No	2	0.56"	4.13"	Silicone Rubber	0000000	00000	00000	00000

Style 2—Threaded-Insert Mount

Style 2,

Threaded-Insert

Mount

If you can't drill bolt holes into your equipment or floor, use these ribbed, antislip mounts without fasteners.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			5/16"-18	45	0.35"	Not Rated	Not Rated	1.5"	1.19"	3.19"	1.63"	-20 to 225	No	2	0.34"	2.38"	Steel	00000000	000000	000000	000000


			5/16"-18	75	0.35"	Not Rated	Not Rated	1.5"	1.19"	3.19"	1.63"	-20 to 225	No	2	0.34"	2.38"	Steel	0000000	00000	00000	00000
			5/16"-18	125	0.35"	Not Rated	Not Rated	1.5"	1.19"	3.19"	1.63"	-20 to 225	No	2	0.34"	2.38"	Steel	00000000	00000	00000	00000
			3/8"-16	150	0.4"	Not Rated	Not Rated	1.88"	1.75"	3.88"	2.31"	-20 to 225	No	2	0.34"	3"	Steel	0000000	00000	00000	00000
			3/8"-16	380	0.4"	Not Rated	Not Rated	1.88"	1.75"	3.88"	2.31"	-20 to 225	No	2	0.34"	3"	Steel	0000000	00000	00000	00000
			3/8"-16	600	0.4"	Not Rated	Not Rated	1.88"	1.75"	3.88"	2.31"	-20 to 225	No	2	0.34"	3"	Steel	00000000	00000	00000	00000
			1/2"-13	600	0.5"	Not Rated	Not Rated	2.75"	2.56"	5.5"	3.31"	-20 to 225	No	2	0.56"	4.13"	Steel	00000000	00000	00000	00000
			1/2"-13	1,000	0.5"	Not Rated	Not Rated	2.75"	2.56"	5.5"	3.31"	-20 to 225	No	2	0.56"	4.13"	Steel	00000000	00000	00000	00000
			1/2"-13	2,100	0.5"	Not Rated	Not Rated	2.75"	3.38"	6.25"	4"	-20 to 225	No	2	0.56"	5"	Steel	00000000	00000	00000	00000
			1/2"-13	4,300	0.5"	Not Rated	Not Rated	2.75"	3.38"	6.75"	4.38"	-20 to 225	No	2	0.56"	5.5"	Steel	00000000	00000	00000	00000

Style 3—Threaded-Insert Mount

Style 3,

Threaded-Insert Mount

The arched construction dissipates the heavy thuds of punch presses and other high-impact machinery.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			1/2"-13	1,500	0.25"	Not Rated	Not Rated	1.63"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	000000	000000	000000


			1/2"-13	1,500	0.5"	Not Rated	Not Rated	2.75"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	2,250	0.25"	Not Rated	Not Rated	1.63"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	2,250	0.5"	Not Rated	Not Rated	2.75"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	3,000	0.25"	Not Rated	Not Rated	1.63"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	3,000	0.5"	Not Rated	Not Rated	2.75"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	4,000	0.25"	Not Rated	Not Rated	1.63"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000
			1/2"-13	4,000	0.5"	Not Rated	Not Rated	2.75"	3"	6.25"	4.63"	-20 to 180	No	2	0.56"	5"	Steel	000000000	00000	00000	00000

Style 4—Threaded-Insert Mount

Style 4,

Threaded-Insert Mount

In addition to high load capacities, the wide, rigid mounting surface minimizes leaning and wobbling. These mounts also isolate low-frequency vibrations, such as those caused by pumps, compressors, and HVAC systems.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			1/2"-13	1,500	0.25"	Not Rated	Not Rated	1.61"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	000000	000000	000000


			1/2"-13	2,500	0.25"	Not Rated	Not Rated	1.61"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000
			1/2"-13	4,400	0.19"	Not Rated	Not Rated	1.61"	5.31"	7.25"	3"	-20 to 180	No	2	0.44"	6.25"	Steel	000000000	000000	000000	000000
			3/4"-10	700	0.25"	Not Rated	Not Rated	1.5"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000
			3/4"-10	1,000	0.25"	Not Rated	Not Rated	1.5"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000
			3/4"-10	1,500	0.25"	Not Rated	Not Rated	1.5"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000
			M12 × 1.75 mm	700	0.25"	Not Rated	Not Rated	1.61"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000

Style 5—Threaded-Insert Mount

Style 5,

Threaded-Insert

Mount

The arched construction dissipates the heavy thuds of punch presses and other high-impact machinery. These mounts also isolate low-frequency vibrations, such as those caused by pumps, compressors, and HVAC systems.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			1/2"-13	60	0.2"	Not Rated	Not Rated	1.5"	1.53"	4.41"	2"	-20 to 180	No	2	0.41"	3.75"	Steel	000000000	000000	000000	000000


			1/2"-13	100	0.2"	Not Rated	Not Rated	1.5"	1.53"	4.41"	2"	-20 to 180	No	2	0.41"	3.75"	Steel	000000000	00000	00000	00000
			1/2"-13	130	0.2"	Not Rated	Not Rated	1.5"	1.53"	4.41"	2"	-20 to 180	No	2	0.41"	3.75"	Steel	000000000	00000	00000	00000
			1/2"-13	200	0.2"	Not Rated	Not Rated	1.5"	1.53"	4.41"	4"	-20 to 180	No	2	0.41"	3.75"	Steel	000000000	00000	00000	00000
			1/2"-13	260	0.2"	Not Rated	Not Rated	1.5"	1.53"	4.41"	4"	-20 to 180	No	2	0.41"	3.75"	Steel	000000000	00000	00000	00000
			1/2"-13	700	0.25"	Not Rated	Not Rated	1.61"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000
			1/2"-13	1,000	0.25"	Not Rated	Not Rated	1.61"	3.125"	5.125"	3"	-20 to 180	No	2	0.44"	4.125"	Steel	000000000	00000	00000	00000

Style 6—Threaded-Insert Mount

Style 6,

Threaded-Insert Mount

Best for your tightest spaces, these are our lowest-profile, high-capacity mounts. Their arched construction dissipates the heavy thuds of punch presses and other high-impact machinery.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			5/8"-11	1,500	0.03"	Not Rated	Not Rated	1.19"	4"	7"	2.5"	0 to 180	No	2	0.66"	5.5"	Steel	00000000	0000000	0000000	0000000


			5/8"-11	3,000	0.03"	Not Rated	Not Rated	1.19"	4"	7"	4"	0 to 180	No	2	0.66"	5.5"	Steel	00000000	000000	000000	000000

Style 7—Unthreaded-Hole Mount

Style 7,

Unthreaded-Hole

Mount

These low-profile mounts isolate vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer to support equipment and avoid costly downtime if the rubber fails.

Natural Rubber—The most common choice, these mounts won't scuff or tear easily. They stay strong and flexible even under constant vibration and repeated movement.

Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.

Washers—To make these bushings fail-safe, install with a washer. If the rubber fails, the washer supports your equipment and prevents costly downtime.

Vibration-Damping Mounts																				Washers
							Base				Mounting						Each
Hole Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Thk.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up		Each







			Natural Rubber

			0.166"	2	0.06"	Not Rated	Not Rated	0.78"	1"	1.69"	1.69"	0.025"	0 to 170	No	4	0.141"	1.375"	Aluminum	0000000	000000	000000	000000	0000000	00000


			0.166"	4	0.06"	Not Rated	Not Rated	0.78"	1"	1.69"	1.69"	0.025"	0 to 170	No	4	0.141"	1.375"	Aluminum	0000000	00000	00000	00000	0000000	0000
			0.166"	8	0.06"	Not Rated	Not Rated	0.81"	1"	1.69"	1.69"	0.025"	0 to 170	No	4	0.141"	1.375"	Aluminum	0000000	00000	00000	00000	0000000	0000
			0.257"	30	0.06"	Not Rated	Not Rated	1.41"	1.5"	2.38"	2.38"	0.032"	0 to 170	No	4	0.196"	1.938"	Steel	0000000	00000	00000	00000	0000000	0000
			0.391"	45	0.06"	Not Rated	Not Rated	1.56"	2"	3"	3"	0.032"	0 to 170	No	4	0.257"	2.5"	Steel	0000000	00000	00000	00000	0000000	0000

Style 8—Unthreaded-Hole Mount

Style 8,

Unthreaded-Hole

Mount

These low-profile mounts are designed to fit into cutouts. Use them to isolate vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer to support equipment and avoid costly downtime if the rubber fails.

Natural Rubber—The most common choice, these mounts won't scuff or tear easily. They stay strong and flexible even under constant vibration and repeated movement.

Washers—To make these bushings fail-safe, install with a washer. If the rubber fails, the washer supports your equipment and prevents costly downtime.

Vibration-Damping Mounts																				Washers
							Base				Mounting						Each
Hole Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Thk.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up		Each







			Natural Rubber

			0.257"	30	0.06"	Not Rated	Not Rated	1.12"	1.5"	1.75"	1.75"	0.05"	0 to 170	No	4	0.166"	1.375"	Steel	0000000	000000	000000	000000	0000000	00000


			0.391"	90	0.06"	Not Rated	Not Rated	1.81"	2"	2.25"	2.25"	0.062"	0 to 170	No	4	0.196"	1.75"	Steel	0000000	00000	00000	00000	0000000	0000

Style 9—Unthreaded-Hole Mount

Style 9,

Unthreaded-Hole

Mount

Whether mounted underneath or on the side of equipment, these low-profile mounts support your load and are designed to fit into a cutout. Use them to isolate vibration around wiring, circuit boards, and other components installed in narrow gaps. Install a washer to support equipment and avoid costly downtime if the rubber fails.

Washers—To make these bushings fail-safe, install with a washer. If the rubber fails, the washer supports your equipment and prevents costly downtime.

Vibration-Damping Mounts																				Washers
							Base				Mounting						Each
Hole Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Thk.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up		Each







			Multipurpose Neoprene

			0.166"	2	0.06"	2	0.06"	0.41"	1"	1.25"	1.25"	0.032"	-20 to 180	No	4	0.141"	1"	Steel	0000000	00000	00000	00000	0000000	00000


			0.166"	4	0.06"	4	0.06"	0.41"	1"	1.25"	1.25"	0.032"	-20 to 180	No	4	0.166"	1"	Steel	0000000	0000	0000	0000	0000000	0000
			0.166"	8	0.06"	Not Rated	Not Rated	0.41"	1"	1.25"	1.25"	0.032"	-20 to 180	No	4	0.166"	1"	Steel	0000000	0000	0000	0000	0000000	0000
			0.257"	12	0.09"	12	0.09"	0.63"	1.5"	1.75"	1.75"	0.05"	-20 to 180	No	4	0.169"	1.375"	Steel	000000	0000	0000	0000	0000000	0000
			0.391"	20	0.185"	20	0.185"	1.06"	2"	2.25"	2.25"	0.062"	-20 to 180	No	4	0.196"	1.75"	Steel	0000000	0000	0000	0000	0000000	0000
			0.391"	45	0.185"	45	0.185"	1.06"	2"	2.25"	2.25"	0.062"	-20 to 180	No	4	0.196"	1.75"	Steel	0000000	0000	0000	0000	0000000	0000

Style 10—Unthreaded-Hole Mount

Style 10,

Unthreaded-Hole

Mount

Best for light vertical loads. These low-frequency mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Aluminum Base—Won't weaken and rust as quickly as steel when exposed to moisture and chemicals.

							Base			Mounting						Each
Hole Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			0.26"	4	0.12"	Not Rated	Not Rated	0.75"	0.9"	1.68"	1.25"	-20 to 180	No	2	0.17"	1.41"	Aluminum	0000000	00000	00000	00000


			0.26"	6.5	0.12"	Not Rated	Not Rated	0.75"	0.9"	1.68"	1.25"	-20 to 180	No	2	0.17"	1.41"	Aluminum	00000000	0000	0000	0000
			0.26"	11	0.12"	Not Rated	Not Rated	0.75"	0.9"	1.68"	1.25"	-20 to 180	No	2	0.17"	1.41"	Aluminum	00000000	0000	0000	0000
			0.26"	15	0.12"	Not Rated	Not Rated	0.75"	0.9"	1.68"	1.25"	-20 to 180	No	2	0.17"	1.41"	Aluminum	00000000	0000	0000	0000
			0.26"	18	0.12"	Not Rated	Not Rated	0.75"	0.9"	1.68"	1.25"	-20 to 180	No	2	0.17"	1.41"	Aluminum	00000000	0000	0000	0000

Fail-Safe Vibration-Damping Bolt-Down Mounts


Threaded-Insert Mount	Unthreaded-Hole Mount

Avoid the cost and hassle of a mount suddenly giving out. Even if the rubber fails, the interlocking steel body holds up to maintain load support and minimize downtime while you find a replacement. These mounts absorb shock and vibration to extend the life of heavy machinery and prevent cracking in nearby equipment, floors, and walls.

Threaded-Insert Mount

Multipurpose Neoprene—A good choice for equipment that's exposed to sunlight, rain, and ozone. These mounts resist wear and tear well enough for most applications, but they aren't as oil resistant as Buna-N.

Oil-Resistant Buna-N—Better resistance to oil and fuels than other rubber mounts. They are good for frequently lubricated machinery and oily equipment, such as engines and pumps. Mounts also have a wider temperature range than neoprene for use in refrigerated areas and around heat-generating equipment.

								Base			Mounting						Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







				Multipurpose Neoprene

				1/4"-20	46	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	00000	00000	00000


				1/4"-20	85	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				1/4"-20	115	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				1/4"-20	135	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				5/16"-18	85	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				5/16"-18	170	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				5/16"-18	250	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				5/16"-18	340	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				3/8"-16	210	0.1"	Not Rated	Not Rated	1.12"	1.78"	3.75"	2.27"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	0000
				3/8"-16	210	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	0000000	00000	00000	00000
				3/8"-16	360	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	00000


				3/8"-16	370	0.1"	Not Rated	Not Rated	1.12"	1.78"	3.75"	2.27"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	0000
				3/8"-16	520	0.1"	Not Rated	Not Rated	1.12"	1.78"	3.75"	2.27"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	0000
				3/8"-16	520	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	00000
				3/8"-16	680	0.1"	Not Rated	Not Rated	1.12"	1.78"	3.75"	2.27"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	0000
				3/8"-16	680	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	00000000	00000	00000	00000
				3/8"-16	750	0.08"	Not Rated	Not Rated	1.12"	1.78"	3.75"	2.27"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	0000
				1/2"-13	470	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				1/2"-13	710	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				1/2"-13	940	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				1/2"-13	1,060	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000


				3/4"-10	900	0.13"	Not Rated	Not Rated	1.84"	3.1"	6.41"	4.09"	10 to 180	No	2	0.53"	5"	Steel	000000000	00000	00000	00000
				3/4"-10	1,105	0.13"	Not Rated	Not Rated	1.84"	3.1"	6.41"	4.09"	10 to 180	No	2	0.53"	5"	Steel	000000000	00000	00000	00000
				3/4"-10	1,630	0.13"	Not Rated	Not Rated	1.84"	3.1"	6.41"	4.09"	10 to 180	No	2	0.53"	5"	Steel	000000000	00000	00000	00000
				3/4"-10	2,270	0.17"	Not Rated	Not Rated	2.25"	4.12"	7.41"	5.1"	10 to 180	No	2	0.63"	6"	Steel	000000000	00000	00000	00000
				3/4"-10	2,500	0.13"	Not Rated	Not Rated	1.84"	3.1"	6.41"	4.09"	10 to 180	No	2	0.53"	5"	Steel	000000000	00000	00000	00000
				3/4"-10	3,520	0.17"	Not Rated	Not Rated	2.25"	4.12"	7.41"	5.1"	10 to 180	No	2	0.63"	6"	Steel	000000000	00000	00000	00000
				3/4"-10	4,120	0.17"	Not Rated	Not Rated	2.25"	4.12"	7.41"	5.1"	10 to 180	No	2	0.63"	6"	Steel	000000000	00000	00000	00000
				3/4"-10	6,600	0.17"	Not Rated	Not Rated	2.25"	4.12"	7.41"	5.1"	10 to 180	No	2	0.63"	6"	Steel	000000000	00000	00000	00000
				M6 × 1 mm	46	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				M6 × 1 mm	85	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000


				M6 × 1 mm	115	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				M6 × 1 mm	135	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	10 to 180	No	2	0.26"	1.75"	Steel	000000000	0000	0000	0000
				M8 × 1.25 mm	85	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				M8 × 1.25 mm	170	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				M8 × 1.25 mm	210	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	00000
				M8 × 1.25 mm	250	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				M8 × 1.25 mm	340	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	10 to 180	No	2	0.34"	2.38"	Steel	000000000	0000	0000	0000
				M8 × 1.25 mm	360	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	00000
				M8 × 1.25 mm	520	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	00000
				M8 × 1.25 mm	680	0.1"	Not Rated	Not Rated	1.25"	1.86"	3.81"	2.32"	10 to 180	No	2	0.34"	3"	Steel	000000000	00000	00000	00000


				M12 × 1.75 mm	470	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				M12 × 1.75 mm	715	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				M12 × 1.75 mm	940	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
				M12 × 1.75 mm	1,060	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	10 to 180	No	2	0.51"	4.12"	Steel	000000000	00000	00000	00000
M20 × 2.5 mm				900	0.13"	Not Rated	Not Rated	1.84"	3.1"	6.41"	4.09"	10 to 180	No	2	0.53"	5"	Steel	000000000	00000	00000	00000




		Oil-Resistant Buna-N

		1/4"-20	87	0.05"	Not Rated	Not Rated	0.75"	0.92"	2.27"	1.25"	-40 to 285	No	2	0.26"	1.75"	Steel	0000000	00000	00000	00000


		5/16"-18	170	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	-40 to 285	No	2	0.34"	2.38"	Steel	0000000	00000	00000	00000
		5/16"-18	250	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	-40 to 285	No	2	0.34"	2.38"	Steel	0000000	00000	00000	00000
		5/16"-18	340	0.08"	Not Rated	Not Rated	1.02"	1.2"	3.13"	1.73"	-40 to 285	No	2	0.34"	2.38"	Steel	0000000	00000	00000	00000
		3/8"-16	370	0.08"	Not Rated	Not Rated	1.02"	1.77"	3.13"	1.73"	-40 to 285	No	2	0.34"	2.38"	Steel	0000000	00000	00000	00000
		3/8"-16	520	0.1"	Not Rated	Not Rated	1.12"	1.77"	3.75"	2.27"	-40 to 285	No	2	0.34"	3"	Steel	0000000	00000	00000	00000
		3/8"-16	750	0.1"	Not Rated	Not Rated	1.12"	1.77"	3.75"	2.27"	-40 to 285	No	2	0.34"	3"	Steel	0000000	00000	00000	00000
		1/2"-13	713	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	-40 to 285	No	2	0.51"	4.12"	Steel	0000000	00000	00000	00000
		1/2"-13	1,064	0.13"	Not Rated	Not Rated	1.78"	2.42"	5.5"	3.37"	-40 to 285	No	2	0.51"	4.12"	Steel	0000000	00000	00000	00000

Unthreaded-Hole Mount

							Base			Mounting						Each
Hole Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			0.5"	375	0.13"	Not Rated	Not Rated	1.66"	3.25"	5.38"	3.25"	10 to 180	No	2	0.53"	4.12"	Steel	00000000	000000	000000	000000


			0.5"	800	0.13"	Not Rated	Not Rated	1.66"	3.25"	5.38"	3.25"	10 to 180	No	2	0.53"	4.12"	Steel	00000000	00000	00000	00000
			0.5"	925	0.13"	Not Rated	Not Rated	1.66"	3.25"	5.38"	3.25"	10 to 180	No	2	0.53"	4.12"	Steel	00000000	00000	00000	00000
			0.5"	1,425	0.13"	Not Rated	Not Rated	1.66"	3.25"	5.38"	3.25"	10 to 180	No	2	0.53"	4.12"	Steel	00000000	00000	00000	00000
			0.62"	525	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.62"	1,000	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.62"	1,250	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.62"	1,950	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.75"	525	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.75"	1,000	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000
			0.75"	1,250	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000


			0.75"	1,950	0.13"	Not Rated	Not Rated	1.66"	3.94"	6.25"	3.94"	10 to 180	No	2	0.53"	5"	Steel	00000000	00000	00000	00000

Shock-Absorbing Spring Vibration-Damping Mounts

Absorb higher-intensity shocks and vibration than mounts without springs. These mounts compress (deflect) four times farther than other mounts when force is applied to protect shaking, thudding machinery and nearby equipment. They also dissipate the low, slow-moving vibrations other mounts can't handle, such as the rumbling of traffic or a large air compressor. With a durable antislip base that secures equipment without the help of fasteners, these mounts are ideal for floors you can't drill into and equipment without bolt holes.

Threaded-Insert Mount

Image of Product. Front orientation. Vibration-Damping Mounts. Shock-Absorbing Spring Vibration-Damping Mounts.

Vibration-Damping Mounts																		Replacement Springs
							Base			Mounting
Cap. per Mount, lb.	Thread Size	Thread Lg.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Bolt Material	Base Material		Each		Each







			Steel

			50	3/8"-16	3"	1"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	000000	0000000	00000


			100	3/8"-16	3"	1"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	0000
			150	3/8"-16	3"	1"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	0000
			250	3/8"-16	3"	0.83"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	0000
			370	3/8"-16	3"	0.75"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	0000
			520	3/8"-16	3"	0.75"	Not Rated	Not Rated	3.375"	5.875"	2.38"	-20 to 180	No	2	0.438"	5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	00000
			675	1/2"-13	3 1/2"	1.32"	Not Rated	Not Rated	5.25"	7.75"	3"	-20 to 180	No	2	0.625"	6.5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	00000
			900	1/2"-13	3 1/2"	1.02"	Not Rated	Not Rated	5.25"	7.75"	3"	-20 to 180	No	2	0.625"	6.5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	00000
			1,200	1/2"-13	3 1/2"	0.9"	Not Rated	Not Rated	5.25"	7.75"	3"	-20 to 180	No	2	0.625"	6.5"	Zinc-Plated Steel Bolt	Iron	0000000	00000	0000000	00000
			1,785	1/2"-13	3 1/2"	0.88"	Not Rated	Not Rated	5.25"	7.75"	3"	-20 to 180	No	2	0.625"	6.5"	Zinc-Plated Steel Bolt	Iron	0000000	000000	0000000	00000

Shock-Absorbing Air Spring Vibration-Damping Mounts

Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.

Threaded-Insert Mount

Image of Product. Front orientation. Vibration-Damping Mounts. Shock-Absorbing Air Spring Vibration-Damping Mounts.

								Base			Mounting					Air Inlet
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Ht.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Max. Pressure, psi	Thread Size	Thread Type	Base Material		Each







			Multipurpose Neoprene

			3/8"-16	100	1"	Not Rated	Not Rated	2.5"	2.88"	2"	3"	3"	-20 to 180	No	4	0.3"	2.38"	60	0.305"-32	Schrader	Aluminum	00000000	0000000


			1/2"-13	300	1"	Not Rated	Not Rated	2.45"	4.14"	1.91"	4.19"	4.19"	-20 to 180	No	4	0.3"	3.5"	60	0.305"-32	Schrader	Aluminum	00000000	000000
			1/2"-13	600	1.5"	Not Rated	Not Rated	3.5"	5"	2.94"	5.12"	5.12"	-20 to 180	No	4	0.3"	4.25"	80	0.305"-32	Schrader	Aluminum	00000000	000000
			1/2"-13	1,200	1.5"	Not Rated	Not Rated	3.5"	6.74"	2.94"	6.88"	6.88"	-20 to 180	No	4	0.3"	6"	80	0.305"-32	Schrader	Aluminum	00000000	000000
			5/8"-11	2,400	1.25"	Not Rated	Not Rated	3.5"	9.66"	2.94"	10"	10"	-20 to 180	No	4	0.56"	8.5"	80	0.305"-32	Schrader	Aluminum	00000000	000000
			5/8"-11	4,800	1.5"	Not Rated	Not Rated	3.5"	13.31"	2.94"	13.5"	13.5"	-20 to 180	No	4	0.56"	12"	80	0.305"-32	Schrader	Aluminum	00000000	000000
			M10 × 1.5 mm	100	0.5"	Not Rated	Not Rated	2.5"	2.89"	1.94"	3"	3"	-20 to 180	No	4	0.3"	2.38"	85	0.305"-32	Schrader	Aluminum	00000000	00000
			M12 × 1.75 mm	300	0.5"	Not Rated	Not Rated	2.5"	4.14"	1.94"	4.19"	4.19"	-20 to 180	No	4	0.3"	3.5"	85	0.305"-32	Schrader	Aluminum	00000000	000000
			M12 × 1.75 mm	550	0.5"	Not Rated	Not Rated	3.5"	5"	2.94"	5.13"	5.13"	-20 to 180	No	4	0.3"	4.25"	85	0.305"-32	Schrader	Aluminum	00000000	000000
			M12 × 1.75 mm	1,200	0.5"	Not Rated	Not Rated	3.5"	6.74"	2.94"	6.88"	6.88"	-20 to 180	No	4	0.3"	6"	85	0.305"-32	Schrader	Aluminum	00000000	000000
			M16 × 2 mm	2,400	0.5"	Not Rated	Not Rated	3.5"	9.66"	2.94"	10"	10"	-20 to 180	No	4	0.56"	8.5"	85	0.305"-32	Schrader	Aluminum	00000000	000000

Any-Orientation Fail-Safe Vibration-Damping Bolt-Down Mounts


Style 1, Threaded-Insert Mount	Style 2, Threaded-Insert Mount

Image of Specification. Side1 orientation. Contains Annotated, Border, MultipleImages. Any Orientation.

Dampen vibration in any orientation. Unlike traditional mounts that may fail when installed in the wrong position, these support the same load capacity no matter how they’re mounted. Also known as all-attitude mounts, they’re often used in aerospace and aviation to handle unpredictable motion. Even if the rubber fails, the steel body holds up to support the load and minimize downtime while you find a replacement. To install on equipment, bolt through the threaded insert. Secure mounts to the support structure using the holes in the flange.

Style 1—Threaded-Insert Mount


	Style 1, Threaded-Insert Mount

A zinc-plated steel cover guards the neoprene insert from dust, oil, and moisture, extending the mount’s life. The enclosed, cup-style design spreads shock forces evenly to protect sensitive equipment.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			1/4"-20	14	0.01"	14	0.01"	1.125"	2.313"	2.375"	2.375"	-20 to 180	No	4	0.2"	1.938"	Steel	00000000	000000	000000	000000


			1/4"-20	24	0.01"	24	0.01"	1.125"	2.313"	2.375"	2.375"	-20 to 180	No	4	0.2"	1.938"	Steel	00000000	00000	00000	00000
			1/4"-20	60	0.01"	60	0.01"	1.125"	2.313"	2.375"	2.375"	-20 to 180	No	4	0.2"	1.938"	Steel	00000000	00000	00000	00000
			3/8"-16	50	0.01"	50	0.01"	1.5"	3"	3"	3"	-20 to 180	No	4	0.27"	2.5"	Steel	00000000	00000	00000	00000
			3/8"-16	110	0.01"	110	0.01"	1.5"	3"	3"	3"	-20 to 180	No	4	0.27"	2.5"	Steel	00000000	00000	00000	00000

Style 2—Threaded-Insert Mount


	Style 2, Threaded-Insert Mount

These mounts are designed to fit into cutouts, giving them a lower profile than Style 1 mounts. They’re often used to mount lightweight electronics and computers in military vehicles, aircraft, and construction equipment.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			1/4"-20	15	0.07"	15	0.12"	1"	1.52"	1.75"	1.75"	-20 to 180	No	4	0.17"	1.375"	Steel	0000000	000000	000000	000000


			1/4"-20	25	0.06"	25	0.1"	1"	1.52"	1.75"	1.75"	-20 to 180	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000
			1/4"-20	35	0.04"	35	0.07"	1"	1.52"	1.75"	1.75"	-20 to 180	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000
			1/4"-20	50	0.04"	50	0.07"	1"	1.52"	1.75"	1.75"	-20 to 180	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000




					High-Temperature Silicone Rubber

					1/4"-20	15	0.07"	15	0.12"	1"	1.52"	1.75"	1.75"	-80 to 300	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000


					1/4"-20	25	0.06"	25	0.1"	1"	1.52"	1.75"	1.75"	-80 to 300	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000
					1/4"-20	35	0.04"	35	0.07"	1"	1.52"	1.75"	1.75"	-80 to 300	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000
					1/4"-20	50	0.04"	50	0.07"	1"	1.52"	1.75"	1.75"	-80 to 300	No	4	0.17"	1.375"	Steel	0000000	00000	00000	00000

Seismic Vibration-Damping Mounts

Offset shock and vibration under normal conditions while preventing sheared bolts and other costly damage during an earthquake. With two rows of bolt holes and a steel covering to remain rigid and stable, these mounts withstand 1g of lateral force. Ideal for large industrial machinery, they stay rigid and strong under loads of up to 3,500 pounds.

Multipurpose Neoprene About Multipurpose Neoprene

Steel Base and Cadmium-Plated Steel Bolt—The cadmium adds lubricity so the bolt threads on smoothly and won’t seize or gall if you need to adjust the height of your equipment.

										Base		Mounting
	Thread Size	Cap. per Mount, lb.	Thread Lg.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Seismic Rating, g	Temp. Range, ° F	Overall Ht.	Lg.	Wd.	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.		Each
Steel Base and Cadmium-Plated Steel Bolt



		1/2"-13	250	1 1/4"	0.15"	200	0.09"	1	-20 to 225	2.3"	4.75"	3"	No	6	0.438"	3.875", 2"	0000000	000000


		1/2"-13	525	1 1/4"	0.15"	420	0.09"	1	-20 to 225	2.3"	4.75"	3"	No	6	0.438"	3.875", 2"	0000000	00000
		1/2"-13	1,000	1 1/4"	0.15"	800	0.09"	1	-20 to 225	2.3"	4.75"	3"	No	6	0.438"	3.875", 2"	0000000	00000
		5/8"-11	1,400	1 1/4"	0.15"	400	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	00000
		5/8"-11	2,100	1 1/4"	0.15"	600	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	00000
		5/8"-11	3,500	1 1/4"	0.15"	1,000	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	00000