Container Type Container Type |
|---|
|
Measures Measures |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Housing Material Housing Material |
|---|
|
Environment Environment |
|---|
|
|
Environmental Rating Environmental Rating |
|---|
Power Source Power Source |
|---|
|
Certificate Certificate |
|---|
 | Material Certificate with Traceable Lot Number and Product Shelf Life |
Output Type Output Type |
|---|
|
Vibration-Monitoring Kits
Keep machinery running smoothly by monitoring its health and status from your computer. Often used with electric motors, pumps, and lathes, these kits measure changes in vibration and temperature—identifying equipment problems and potential failures before they occur. Plug in the sensor, set your thresholds, and view data directly on your screen. You’ll also receive email notifications when vibrations move beyond your specified range, making them good for preventative maintenance. These sensors are 20 times faster than our other vibration monitors, and they don’t require devices such as programmable logic controllers (PLCs) to operate.
Sensors mount directly to your equipment. Use the magnetic base for quick installation, or use the threaded hole for a more permanent setup. Once the sensor is hooked up, you can either wire it directly to the receiver or connect it to the wireless transmitter to view data remotely.
Kits with a USB connection link only to your computer for direct and easy monitoring.
Kits with an Ethernet connection can be configured to a wider network, transmit data over longer runs of cable, and integrate into other automated systems, such as a PLC.
Sensor | Receiver | Wireless Transmitter | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Sensors Included | Vibration Range, g | Temp. Range, °F | Frequency Range, Hz | Housing Ht. | Housing Dia. | Mount. Hole Thread Size | Cord Lg., ft. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Voltage | Software Included | Includes | Each | |
USB Connection | ||||||||||||||||||
| 1 | 0-102 | -40° to 257° | 10-21,000 | 11/16" | 3/4" | 6-32 | 10 | 5 1/4" | 3 3/4" | 3 1/4" | 3/4" | 3" | 1 1/2" | 24V DC | Yes | Two Antennas | 0000000 | 000000000 |
| 4 | 0-102 | -40° to 257° | 10-21,000 | 11/16" | 3/4" | 6-32 | 10 | 7" | 7 1/4" | 4 1/2" | 3/4" | 3" | 1 1/2" | 24V DC | Yes | Eight Antennas | 0000000 | 00000000 |
Ethernet Connection | ||||||||||||||||||
| 1 | 0-102 | -40° to 257° | 10-21,000 | 11/16" | 3/4" | 6-32 | 10 | 5 1/4" | 3 3/4" | 3 1/4" | 3/4" | 3" | 1 1/2" | 24V DC | Yes | Two Antennas | 0000000 | 00000000 |
| 4 | 0-102 | -40° to 257° | 10-21,000 | 11/16" | 3/4" | 6-32 | 10 | 17 3/4" | 12" | 5 3/4" | 3/4" | 3" | 1 1/2" | 24V DC | Yes | Eight Antennas | 0000000 | 00000000 |
Vibration-Monitoring Switches
Two easy-to-set dials allow you to adjust a set activation point for vibration as well as a time delay to avoid false triggering from start-up vibration. An alarm signals if the set activation point is exceeded. Plug the included cable into your data collector or programmable logic controller. IP67 rated for protection from dust and temporary submersion.
Use an optional magnetic base for temporary mounting or a glue-on base for more permanent mounting.
Activation Point | Housing | Power Cord | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range | Frequency Range, Hz | Current Output | Input Voltage Range | Ht. | Dia. | Temp. Range, °F | Mounting Stud Thread Size | Electrical Connection Type | Industry Designation | Number of Wires | Cord Lg., ft. | Environmental Rating | Specifications Met | Each | |
1 On (Normally Closed) Switch Starting Position | |||||||||||||||
SPST-NC | |||||||||||||||
| 0"-1" | 10-1,000 | 4-20 mA | 18V DC-32V DC | 2.9" | 1 1/16" | -10° to 175° | M8 | Plug | M12 | 4 | 16 | IP67 | UL Listed, C-UL Listed, CE Marked, ISO 10816 | 0000000 | 0000000 |
| 0"-2" | 10-1,000 | 4-20 mA | 18V DC-32V DC | 2.9" | 1 1/16" | -10° to 175° | M8 | Plug | M12 | 4 | 16 | IP67 | UL Listed, C-UL Listed, CE Marked, ISO 10816 | 0000000 | 000000 |
Corrosion-Resistant Vibration Monitors
Micro
M12 Plug
These monitors are constructed entirely of stainless steel for excellent corrosion resistance and are IP68 and IP69K rated for protection from temporary submersion and high-pressure washdowns. Connect to your data collector or programmable logic controller to monitor vibration. The 4-pole micro M12 plug connects to the included cable and socket to quickly connect and disconnect it.
To view wiring diagrams, select a part number and click Product Detail.
Use an optional magnetic base for temporary mounting or a glue-on base for more permanent mounting.
Housing | Power Cord | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Vibration Range, mm/s | Frequency Range, Hz | Current Output, mA | Input Voltage Range | Ht. | Dia. | Temp. Range, °F | Mounting Stud Thread Size | Plug Type | Industry Designation | Number of Wires | Cord Lg., ft. | Specifications Met | Includes | Each | |
| 0-25 | 10-1,000 | 4-20 | 9.6V DC-32V DC | 2 1/2" | 7/8" | -10° to 210° | M8 | 4-Pole Micro M12 | M12 | 2 | 16 | UL Listed, C-UL Listed, CE Marked, ISO 10816 | One 1/4"-28 Male Adapter, One 1/4"-28 to M8 Male Adapter | 000000 | 0000000 |
| 0-50 | 10-1,000 | 4-20 | 9.6V DC-32V DC | 2 1/2" | 7/8" | -10° to 210° | M8 | 4-Pole Micro M12 | M12 | 2 | 16 | UL Listed, C-UL Listed, CE Marked, ISO 10816 | One 1/4"-28 Male Adapter, One 1/4"-28 to M8 Male Adapter | 0000000 | 000000 |
Hazardous Location Vibration-Monitoring Switches
Get NEMA 4 and IP66 protection from dirt and water. Switch is rated for hazardous locations for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G. If vibration or shock exceeds a set activation point, the contacts actuate to either shut down your machine or activate an alarm. Reset the switch with the push of a button. The activation point is adjustable between 0 to 5 gravity units (g) at 0 to 60 Hz.
Activation Point | Switching | Conduit | Mounting Slot | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Range, g | Frequency Range, Hz | Current, A | Voltage | Temp. Range, °F | Trade Size | Thread Type | Gender | Mounting Fasteners Included | Number of Mounting Holes | Lg. | Wd. | Environmental Rating | Each | |
1 Off (Normally Open) or 1 On (Normally Closed) Switch Starting Position | ||||||||||||||
SPDT | ||||||||||||||
| 0-5 | 0-60 | 15 | 125V AC 480V AC | -40° to 155° | 3/4 | NPT | Female | No | 4 | 3/4" | 3/8" | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G IP66 NEMA 4 | 0000000 | 0000000 |
Vibration-Monitoring Switches with Digital Display
A built-in display makes it easy to view vibration levels, warnings, and the status of these switches. Use the push-buttons to set and adjust activation points for vibration as well as a start delay to avoid false triggering from start-up vibration. Memory storage captures readings at regular intervals, which lets you analyze your process. These switches have a 5-pole M12 plug that connects to cables with a socket (sold separately), so you can quickly connect and disconnect them. They are IP67 rated for protection from dust and brief submersion. Switches meet American, Canadian, and European safety standards. They also meet ISO standards for vibration monitoring.
Use Nano M8/USB adapter cords to connect these switches to your computer.
Use a magnetic base for temporary mounting or a glue-on base for more permanent mounting.
For technical drawings and 3-D models, click on a part number.
Activation Point | 5-Pole M12 Plug | 4-Pole M8 Socket | Housing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Activation Points | Range, mm/s | Frequency Range, Hz | Input Voltage | Output Type | Current Output | Input Voltage | Output Type | Ht. | Wd. | Dp. | Temp. Range, °F | Mounting Stud Thread Size | Includes | Each | |
1 Off (Normally Open) or 1 On (Normally Closed) Switch Starting Position | |||||||||||||||
| 2 | 0-500 | 2-1,000 | 9.6-30V DC | Analog or Digital Digital | 4-20mA | 5V DC | Digital | 1.42" | 1 1/2" | 2 1/2" | -20° to 140° | M8 | One M5 x M8 Mounting Adapter | 0000000 | 0000000 |
| Housing Thread Size | Number of Poles | Number of Keyways | Coding | Face Diameter | Wire Lead Gauge | Cable Lead Lg., ft. | Temperature Range, °F | Color | Each | |
Socket (Internal Thread) with Wire Leads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| M12 | 5 | 1 | A | 0.3" | 22 | 12 | 0° to 220° | Yellow | 0000000 | 000000 |
Plug | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Housing Thread Size | Number of Poles | Face Diameter | Cable Lead Lg., ft. | USB Standard | Shielding | Current, A | Voltage | Temperature Range, °F | Color | Each | |
Plug (External Thread) × USB A Male | |||||||||||
| M8 | 4 | 0.2" | 16 | 2.0 | Unshielded | 0.5 | 5V DC | -10° to 150° | Black | 0000000 | 000000 |
| Container Size, fl. oz. | Each | |
| 0.85 | 0000000 | 000000 |
Pocket Vibration Meters
A flexible steel wire reed detects vibration while the scale on the side of the meter indicates the machine vibration in cycles per minute (cpm). A simple calculation determines motor speed in rpm for engines with multiple cycles.
Pocket Vibration Meter Sets
Set includes one meter for low-speed vibration and one meter for higher speed vibration. A flexible steel wire reed detects vibration while the scale on the side of the meter indicates the machine vibration in cycles per minute (cpm). A simple calculation determines motor speed in rpm for engines with multiple cycles.
| Includes | Container Type | Set | |
| One Vibration Meter with 200 cpm-2000 cpm Vibration Range and ±15% Accuracy of Reading One Vibration Meter with 2000 cpm-21000 cpm Vibration Range and ±10% Accuracy of Reading | Case | 0000000 | 0000000 |
Vibration Meters with Stethoscopes
In addition to measuring vibration, you can listen to and record machine performance. The magnetic base allows you to mount the probe on a machine for constant readings.
| Measures | Vibration Range, cpm | Acceleration Range, g | Frequency Range, Hz | Velocity Range, in./sec. | Accuracy | Temp. Range, °F | Probe Lg. | Batteries Included | Container Type | Each | |
| Vibration, Acceleration, Frequency, Velocity | 600-600,000 | 0.01-19.99 | 10-10,000 | 0.01-19.99 | ±2% | -10° to 120° | 4 1/2" | Yes | Case | 000000 | 000000000 |
Handheld Machine-Monitoring Sensors
Acceleration, and
Temperature
Monitor the health of pumps, engines, and other rotating equipment from your wireless device. These battery-powered sensors measure velocity, acceleration, and temperature to help identify potential problems related to balance, alignment, and lubrication. Good for daily maintenance checks, they're battery powered and magnetic, so you can stick them on a machine, take a reading, and move to the next machine. They send readings using Bluetooth, which you can review in the field or offsite.
Install the app on your device and create profiles for multiple pieces of equipment—once created, you won’t have to enter information each time you want to do a maintenance check. Based on your machine profiles, the app will set default alarm thresholds. It will also recommend courses of action.
Sensors and replacement chargers cannot be sold to certain regions due to local energy efficiency regulations.
| Measures | Frequency Range, Hz | Velocity Range, in./sec. | Enveloping Acceleration Range | Operating System Compatibility | Height | Width | Depth | Temperature Range, °F | Batteries Included | Battery Charger Included | Environmental Rating | Specifications Met | Cannot Be Sold To | Each | |
| Acceleration, Temperature, Velocity | 10-1,000 | 0-2.17 | 0 gE-20 gE | Android 8.0 or Later, iOS 13.0 or Later | 5 1/4" | 1 3/4" | 1 3/4" | -5° to 140° | Yes | Yes | IP65 | CE Marked | CA, OR | 00000000 | 000000000 |
| Cannot Be Sold To | Each | |
| CA, VT | 00000000 | 0000000 |
| Each | ||
| 00000000 | 0000000 |
Vibration Meters
In addition to vibration, these meters measure acceleration, frequency, velocity, and displacement. Use them to gauge the health of your machine.
| Measures | Vibration Range, cpm | Acceleration Range, g | Frequency Range, Hz | Velocity Range, in./sec. | Displacement Range, mil | Accuracy | Temp. Range, °F | Max. Reading Display Time | Probe Lg. | Batteries Included | Container Type | Each | |
| Vibration, Acceleration, Frequency, Velocity, Displacement | 600-60,000 | 0.01-50 | 10-1,000 | 0.06-307 | 1-4,889 | ±5% | 0° to 390° | 3 min. | 1/64" | Yes | Case | 000000 | 000000000 |
| Battery Chemistry | Voltage | Battery Connection Type | Manufacturer Equivalent Number | Capacity | Pkg. Qty. | Pkg. | |
| Alkaline | 1.5V DC | Button Top | 4206/4006, AM3, E91, LR6, MN1500 | 2,850 mA-hrs. | 4 | 00000000 | 00000 |
High-Visibility Tamper and Vibration Detection Paint
Choose from highly visible fluorescent colors. Apply directly to equipment for easy and economical detection. When paint dries it becomes brittle and cracks from any movement caused by tampering or vibration. It's noncorrosive and adheres to most surfaces, including all types of metal. Excellent for use on small parts. Paint cannot be sold to Canada because it exceeds local regulatory limits on VOCs (volatile organic compounds).
Tamper and Vibration Detection Paint
Apply directly to equipment for easy and economical detection. When paint dries it becomes brittle and cracks from any movement caused by tampering or vibration. It's noncorrosive and adheres to most surfaces, including all types of metal. Excellent for use on small parts. Paint cannot be sold to Canada because it exceeds local regulatory limits on VOCs (volatile organic compounds).
Fast-Drying Tamper and Vibration Detection Paint
Use for large jobs such as machinery bolts. Apply directly to equipment for easy and economical detection. When paint dries it becomes brittle and cracks from any movement caused by tampering or vibration. It's noncorrosive and adheres to most surfaces, including all types of metal.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||
|---|---|---|---|---|---|
| Color | Size, fl. oz. | Type | Temp. Range, °F | Each | |
| White | 5 | Tube | -20° to 200° | 0000000 | 000000 |
Noise-Filtering Stethoscopes
Detect mechanical problems and leaks—headphones reduce background noise so you can isolate individual sounds. Use the 9" flexible probe on its own for general detection. Attach the 5" probe extension to detect faint sounds and vibration and access hard-to-reach areas.