Choose a Category
Clamp Type Clamp Type |
|---|
 |  |
| Pinch | Worm Drive |
Material Material |
|---|
|
Maximum Clamp ID Maximum Clamp ID |
|---|
Minimum Clamp ID Minimum Clamp ID |
|---|
|
Housing Material Housing Material |
|---|
|
Screw Material Screw Material |
|---|
|
Maximum Torque Maximum Torque |
|---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube
Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.
A reinforcing dimple in the ear creates a spring-like action that allows these clamps to withstand vibration and temperature changes without loosening. Also known as ear clamps, they install by crimping the pinch point with pinch-clamp pincers. Clamps are for firm plastic and rubber hose and tube. They are 304 stainless steel for very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | 304 Stainless Steel | |||||
|---|---|---|---|---|---|---|
| Inch | mm | Reusable | Specifications Met | Pkg. Qty. | Pkg. | |
Single Pinch | ||||||
13/64" Band Wd. × 0.02" Band Thick. | ||||||
| 15/64" to 9/32" | 5.8 to 7 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 9/32" to 11/32" | 7 to 8.7 | No | SAE J1508 | 25 | 00000000 | 0000 |
| 5/16" to 3/8" | 7.8 to 9.5 | No | SAE J1508 | 25 | 00000000 | 0000 |
| 11/32" to 13/32" | 8.8 to 10.5 | No | SAE J1508 | 25 | 00000000 | 0000 |
| 3/8" to 7/16" | 9.6 to 11.3 | No | SAE J1508 | 25 | 00000000 | 0000 |
9/32" Band Wd. × 0.024" Band Thick. | ||||||
| 25/64" to 31/64" | 9.8 to 12.3 | No | __ | 10 | 000000000 | 0000 |
| 27/64" to 17/32" | 10.8 to 13.3 | No | SAE J1508 | 25 | 00000000 | 0000 |
| 29/64" to 35/64" | 11.5 to 14 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 15/32" to 9/16" | 12 to 14.5 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 33/64" to 5/8" | 13.2 to 15.7 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 37/64" to 43/64" | 14.5 to 17 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 39/64" to 47/64" | 15.3 to 18.5 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 21/32" to 25/32" | 16.6 to 19.8 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 45/64" to 53/64" | 17.8 to 21 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 49/64" to 57/64" | 19.4 to 22.6 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 53/64" to 61/64" | 20.9 to 24.1 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 7/8" to 1 1/64" | 22.4 to 25.6 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 15/16" to 1 1/16" | 23.9 to 27.1 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1" to 1 1/8" | 25.4 to 28.6 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 1/16" to 1 3/16" | 26.9 to 30.1 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 1/8" to 1 1/4" | 28.4 to 31.6 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 15/64" to 1 23/64" | 31.4 to 34.6 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 3/8" to 1 1/2" | 34.9 to 38.1 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 31/64" to 1 39/64" | 37.8 to 41 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 35/64" to 1 43/64" | 39.3 to 42.5 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 43/64" to 1 51/64" | 42.3 to 45.5 | No | SAE J1508 | 25 | 00000000 | 00000 |
| 1 25/32" to 1 29/32" | 45.3 to 48.5 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 1 29/32" to 2 1/32" | 48.3 to 51.5 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 2 1/64" to 2 9/64" | 51.3 to 54.5 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 2 9/64" to 2 17/64" | 54.3 to 57.5 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 2 1/4" to 2 3/8" | 57.3 to 60.5 | No | __ | 10 | 000000000 | 0000 |
| 2 3/8" to 2 1/2" | 60.3 to 63.5 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 2 31/64" to 2 5/8" | 63.3 to 66.5 | No | __ | 10 | 000000000 | 0000 |
| 2 39/64" to 2 47/64" | 66.3 to 69.5 | No | __ | 10 | 000000000 | 0000 |
| 2 47/64" to 2 55/64" | 69.3 to 72.5 | No | __ | 10 | 000000000 | 0000 |
| 2 27/32" to 2 31/32" | 72.3 to 75.5 | No | __ | 10 | 000000000 | 0000 |
| 2 29/32" to 3 1/32" | 73.8 to 77 | No | SAE J1508 | 10 | 00000000 | 0000 |
| 3 1/32" to 3 5/32" | 76.8 to 80 | No | __ | 10 | 000000000 | 0000 |
| 3 9/64" to 3 17/64" | 79.8 to 83 | No | __ | 10 | 000000000 | 0000 |
| 3 17/64" to 3 25/64" | 82.8 to 86 | No | __ | 10 | 000000000 | 0000 |
| 3 3/8" to 3 1/2" | 85.8 to 89 | No | __ | 10 | 000000000 | 0000 |
| 3 1/2" to 3 5/8" | 88.8 to 92 | No | __ | 10 | 000000000 | 0000 |
| 3 39/64" to 3 47/64" | 91.8 to 95 | No | __ | 10 | 000000000 | 0000 |
| 3 47/64" to 3 55/64" | 94.8 to 98 | No | __ | 5 | 000000000 | 0000 |
| 3 27/32" to 3 31/32" | 97.8 to 101 | No | __ | 5 | 000000000 | 0000 |
| 3 31/32" to 4 3/32" | 100.8 to 104 | No | __ | 5 | 000000000 | 0000 |
| 4 3/32" to 4 7/32" | 103.8 to 107 | No | __ | 5 | 000000000 | 0000 |
| 4 13/64" to 4 21/64" | 106.8 to 110 | No | __ | 5 | 000000000 | 0000 |
| 4 21/64" to 4 29/64" | 109.8 to 113 | No | __ | 5 | 000000000 | 0000 |
| 4 7/16" to 4 9/16" | 112.8 to 116 | No | __ | 5 | 000000000 | 0000 |
| 4 9/16" to 4 11/16" | 115.8 to 119 | No | __ | 5 | 000000000 | 0000 |
9/32" Band Wd. × 0.031" Band Thick. | ||||||
| 19/32" to 11/16" | 15 to 17.5 | No | __ | 10 | 000000000 | 0000 |
| 23/32" to 13/16" | 18.3 to 20.8 | No | __ | 10 | 000000000 | 0000 |
23/64" Band Wd. × 0.024" Band Thick. | ||||||
| 45/64" to 53/64" | 17.8 to 21 | No | __ | 10 | 000000000 | 0000 |
| 53/64" to 61/64" | 20.9 to 24.1 | No | __ | 10 | 000000000 | 0000 |
| 15/16" to 1 1/16" | 23.9 to 27.1 | No | __ | 10 | 000000000 | 0000 |
| 1 1/16" to 1 3/16" | 26.9 to 30.1 | No | __ | 10 | 000000000 | 0000 |
| 1 11/64" to 1 19/64" | 29.9 to 33.1 | No | __ | 10 | 000000000 | 0000 |
| 1 19/64" to 1 27/64" | 32.9 to 36.1 | No | __ | 10 | 000000000 | 0000 |
| 1 25/64" to 1 33/64" | 35.3 to 38.5 | No | __ | 10 | 000000000 | 0000 |
| 1 31/64" to 1 39/64" | 37.8 to 41 | No | __ | 10 | 000000000 | 0000 |
| 1 39/64" to 1 47/64" | 40.8 to 44 | No | __ | 10 | 000000000 | 0000 |
| 1 23/32" to 1 27/32" | 43.8 to 47 | No | __ | 10 | 000000000 | 0000 |
| 1 27/32" to 1 31/32" | 46.8 to 50 | No | __ | 10 | 000000000 | 0000 |
| 2 13/64" to 2 21/64" | 55.8 to 59 | No | __ | 10 | 000000000 | 0000 |
| 2 5/16" to 2 7/16" | 58.8 to 62 | No | __ | 10 | 000000000 | 0000 |
| 2 7/16" to 2 9/16" | 61.8 to 65 | No | __ | 10 | 000000000 | 0000 |
| 2 35/64" to 2 43/64" | 64.8 to 68 | No | __ | 10 | 000000000 | 0000 |
| 2 25/32" to 2 29/32" | 70.8 to 74 | No | __ | 5 | 000000000 | 0000 |
| 2 29/32" to 3 1/32" | 73.8 to 77 | No | __ | 5 | 000000000 | 0000 |
| 3 1/32" to 3 5/32" | 76.8 to 80 | No | __ | 5 | 000000000 | 0000 |
| 3 9/64" to 3 17/64" | 79.8 to 83 | No | __ | 5 | 000000000 | 0000 |
| 3 39/64" to 3 47/64" | 91.8 to 95 | No | __ | 5 | 000000000 | 0000 |
| 3 47/64" to 3 55/64" | 94.8 to 98 | No | __ | 5 | 000000000 | 0000 |
23/64" Band Wd. × 0.031" Band Thick. | ||||||
| 53/64" to 61/64" | 20.9 to 24.1 | No | __ | 10 | 000000000 | 0000 |
| 1 15/64" to 1 23/64" | 31.4 to 34.6 | No | __ | 10 | 000000000 | 0000 |
| 1 7/16" to 1 9/16" | 36.4 to 39.6 | No | __ | 10 | 000000000 | 0000 |
| 1 35/64" to 1 43/64" | 39.3 to 42.5 | No | __ | 10 | 000000000 | 0000 |
| 1 43/64" to 1 51/64" | 42.3 to 45.5 | No | __ | 10 | 000000000 | 0000 |
| 1 25/32" to 1 29/32" | 45.3 to 48.5 | No | __ | 10 | 000000000 | 0000 |
| 1 29/32" to 2 1/32" | 48.3 to 51.5 | No | __ | 5 | 000000000 | 0000 |
| 2 1/64" to 2 9/64" | 51.3 to 54.5 | No | __ | 5 | 000000000 | 0000 |
| 2 1/4" to 2 3/8" | 57.3 to 60.5 | No | __ | 5 | 000000000 | 0000 |
| 2 3/8" to 2 1/2" | 60.3 to 63.5 | No | __ | 5 | 000000000 | 0000 |
| 2 31/64" to 2 5/8" | 63.3 to 66.5 | No | __ | 5 | 000000000 | 0000 |
| 2 29/32" to 3 1/32" | 73.8 to 77 | No | __ | 5 | 000000000 | 0000 |
| 3 43/64" to 3 51/64" | 93.3 to 96.5 | No | __ | 5 | 000000000 | 0000 |
| 3 31/32" to 4 3/32" | 100.8 to 104 | No | __ | 5 | 000000000 | 0000 |
25/64" Band Wd. × 0.031" Band Thick. | ||||||
| 1 1/64" to 1 1/16" | 25.7 to 26.9 | No | __ | 5 | 000000000 | 0000 |
| 1 9/64" to 1 17/64" | 28.8 to 32 | No | __ | 5 | 000000000 | 0000 |
| 1 11/64" to 1 19/64" | 29.8 to 33 | No | __ | 5 | 000000000 | 0000 |
| 1 5/16" to 1 7/16" | 33.3 to 36.5 | No | __ | 5 | 000000000 | 0000 |
25/64" Band Wd. × 0.039" Band Thick. | ||||||
| 3 33/64" to 3 41/64" | 89.3 to 92.5 | No | __ | 1 | 000000000 | 0000 |
| 3 5/8" to 3 3/4" | 92.2 to 95.4 | No | __ | 1 | 000000000 | 0000 |
| 4 1/16" to 4 3/16" | 103.1 to 106.3 | No | __ | 1 | 000000000 | 0000 |
Vibration-Resistant Pinch Clamps for Firm Hose and Tube
Single Pinch
Double Pinch
These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.
Clamps withstand vibration and temperature changes without loosening. They are for firm plastic and rubber hose and tube.
Single Pinch—Perfect for tight spots, these clamps install quickly because only one side needs to be crimped.
Double Pinch—Clamps accommodate a greater variation in hose diameters than single-pinch clamps, and can be used on thicker-walled hose and tube.
Zinc-plated steel clamps have fair corrosion resistance.
304 stainless steel clamps have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | ||||||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Band Wd. | Reusable | Specifications Met | Band Thick. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
Single Pinch | ||||||||
| 21/64" to 25/64" | 8.3 to 10.1 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 00000 |
| 11/32" to 13/32" | 8.9 to 10.5 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 3/8" to 7/16" | 9.7 to 11.3 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 13/32" to 31/64" | 10.4 to 12.3 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 29/64" to 17/32" | 11.4 to 13.3 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 1/2" to 37/64" | 12.6 to 14.5 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 17/32" to 5/8" | 13.5 to 15.7 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 19/32" to 43/64" | 15.1 to 17 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 5/8" to 47/64" | 15.7 to 18.5 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 43/64" to 25/32" | 17 to 19.8 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 23/32" to 53/64" | 18.2 to 21 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 25/32" to 57/64" | 19.8 to 22.6 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 57/64" to 1 1/64" | 22.8 to 25.6 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 15/16" to 1 1/16" | 24 to 27.1 | 9/32" | No | SAE J1508 | 0.03" | 50 | 00000000 | 0000 |
| 1" to 1 1/8" | 25.5 to 28.6 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 1/16" to 1 3/16" | 27 to 30.1 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 1/8" to 1 1/4" | 28.5 to 31.6 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 3/16" to 1 19/64" | 30 to 33.1 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 15/64" to 1 23/64" | 31.5 to 34.6 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 5/16" to 1 27/64" | 33 to 36.1 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 3/8" to 1 1/2" | 35 to 38.1 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 7/16" to 1 35/64" | 36.5 to 39.6 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 1/2" to 1 39/64" | 37.9 to 41 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 9/16" to 1 43/64" | 39.4 to 42.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 5/8" to 1 23/32" | 40.9 to 44 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 43/64" to 1 25/32" | 42.4 to 45.4 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 47/64" to 1 27/32" | 43.9 to 47 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 51/64" to 1 29/32" | 45.4 to 48.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 55/64" to 1 31/32" | 46.9 to 50 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 29/32" to 2 1/64" | 48.4 to 51.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 1 31/32" to 2 5/64" | 49.9 to 53 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 1/32" to 2 9/64" | 51.4 to 54.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 3/32" to 2 13/64" | 52.9 to 56 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 5/32" to 2 1/4" | 54.4 to 57.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 13/64" to 2 5/16" | 55.9 to 59 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 17/64" to 2 3/8" | 57.4 to 60.5 | 9/32" | No | SAE J1508 | 0.03" | 25 | 00000000 | 0000 |
| 2 21/64" to 2 7/16" | 58.9 to 62 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 25/64" to 2 1/2" | 60.4 to 63.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 7/16" to 2 35/64" | 61.9 to 65 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 1/2" to 2 39/64" | 63.4 to 66.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 9/16" to 2 21/32" | 64.9 to 68 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 5/8" to 2 47/64" | 66.4 to 69.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 11/16" to 2 25/32" | 67.9 to 71 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 47/64" to 2 27/32" | 69.4 to 72.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 51/64" to 2 29/32" | 70.9 to 74 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 55/64" to 2 31/32" | 72.4 to 75.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 59/64" to 3 1/64" | 73.9 to 77 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 2 31/32" to 3 5/64" | 75.4 to 78.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 3 7/32" to 3 5/16" | 81.4 to 84.5 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
| 3 5/8" to 3 47/64" | 91.9 to 95 | 9/32" | No | SAE J1508 | 0.03" | 10 | 00000000 | 0000 |
Double Pinch | ||||||||
| 1/8" to 5/32" | 3.1 to 4.1 | 9/64" | No | SAE J1508 | 0.02" | 25 | 0000000 | 0000 |
| 9/64" to 11/64" | 3.5 to 4.5 | 9/64" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 9/64" to 13/64" | 3.4 to 5 | 13/64" | No | SAE J1508 | 0.028" | 25 | 0000000 | 0000 |
| 13/64" to 9/32" | 5 to 7 | 15/64" | No | SAE J1508 | 0.028" | 25 | 0000000 | 0000 |
| 9/32" to 23/64" | 7 to 9 | 9/32" | No | SAE J1508 | 0.039" | 25 | 0000000 | 0000 |
| 5/16" to 7/16" | 8.1 to 11 | 9/32" | No | SAE J1508 | 0.039" | 25 | 0000000 | 0000 |
| 27/64" to 33/64" | 10.8 to 13 | 9/32" | No | SAE J1508 | 0.039" | 25 | 0000000 | 0000 |
| 31/64" to 19/32" | 12.5 to 15 | 19/64" | No | SAE J1508 | 0.039" | 25 | 0000000 | 0000 |
| 9/16" to 21/32" | 14 to 17 | 5/16" | No | __ | 0.047" | 25 | 0000000 | 00000 |
| 19/32" to 45/64" | 15 to 18 | 5/16" | No | SAE J1508 | 0.047" | 25 | 0000000 | 0000 |
| 41/64" to 25/32" | 16.2 to 20 | 21/64" | No | SAE J1508 | 0.047" | 25 | 0000000 | 00000 |
| 45/64" to 55/64" | 18 to 22 | 23/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 3/4" to 29/32" | 19 to 23 | 23/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 53/64" to 63/64" | 21 to 25 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 7/8" to 1 1/16" | 22.5 to 27 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 15/16" to 1 7/64" | 24 to 28 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 1 1/32" to 1 7/32" | 26.3 to 31 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 1 5/32" to 1 11/32" | 29.3 to 34 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 00000 |
| 1 17/64" to 1 29/64" | 32 to 37 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 1 3/8" to 1 37/64" | 35 to 40 | 25/64" | No | SAE J1508 | 0.059" | 10 | 0000000 | 0000 |
| 1 31/64" to 1 11/16" | 37.6 to 43 | 25/64" | No | __ | 0.059" | 5 | 0000000 | 0000 |
| 1 39/64" to 1 13/16" | 40.6 to 46 | 25/64" | No | __ | 0.059" | 5 | 0000000 | 0000 |
304 Stainless Steel | ||||||||
Single Pinch | ||||||||
| 21/64" to 25/64" | 8.3 to 10.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 11/32" to 13/32" | 8.9 to 10.5 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 3/8" to 7/16" | 9.7 to 11.3 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 13/32" to 31/64" | 10.4 to 12.3 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 29/64" to 17/32" | 11.4 to 13.3 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1/2" to 37/64" | 12.6 to 14.5 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 17/32" to 5/8" | 13.5 to 15.7 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 19/32" to 43/64" | 15.1 to 17 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 5/8" to 47/64" | 15.7 to 18.5 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 43/64" to 25/32" | 17 to 19.8 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 23/32" to 53/64" | 18.2 to 21 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 25/32" to 57/64" | 19.8 to 22.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 27/32" to 15/16" | 21.3 to 24.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 57/64" to 1 1/64" | 22.8 to 25.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 15/16" to 1 1/16" | 24 to 27.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1" to 1 1/8" | 25.5 to 28.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 1/16" to 1 3/16" | 27 to 30.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 1/8" to 1 1/4" | 28.5 to 31.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 3/16" to 1 19/64" | 30 to 33.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 15/64" to 1 23/64" | 31.5 to 34.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 5/16" to 1 27/64" | 33 to 36.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 3/8" to 1 1/2" | 35 to 38.1 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 7/16" to 1 35/64" | 36.5 to 39.6 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 1/2" to 1 39/64" | 37.9 to 41 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 9/16" to 1 43/64" | 39.4 to 42.5 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 5/8" to 1 23/32" | 40.9 to 44 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 43/64" to 1 25/32" | 42.4 to 45.5 | 9/32" | No | SAE J1508 | 0.024" | 25 | 0000000 | 0000 |
| 1 47/64" to 1 27/32" | 43.9 to 47 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 1 51/64" to 1 29/32" | 45.4 to 48.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 1 55/64" to 1 31/32" | 46.9 to 50 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 1 29/32" to 2 1/64" | 48.4 to 51.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 1 31/32" to 2 5/64" | 49.9 to 53 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 1/32" to 2 9/64" | 51.4 to 54.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 3/32" to 2 13/64" | 52.9 to 56 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 5/32" to 2 1/4" | 54.4 to 57.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 13/64" to 2 5/16" | 55.9 to 59 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 17/64" to 2 3/8" | 57.4 to 60.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 21/64" to 2 7/16" | 58.9 to 62 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 25/64" to 2 1/2" | 60.4 to 63.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 7/16" to 2 35/64" | 61.9 to 65 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 1/2" to 2 39/64" | 63.4 to 66.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 9/16" to 2 43/64" | 64.9 to 68 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 5/8" to 2 47/64" | 66.4 to 69.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 11/16" to 2 25/32" | 67.9 to 71 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 51/64" to 2 29/32" | 70.9 to 74 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 2 59/64" to 3 1/32" | 73.9 to 77 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 1/32" to 3 9/64" | 76.9 to 80 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 5/32" to 3 17/64" | 79.9 to 83 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 21/64" to 3 7/16" | 84.4 to 87.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 25/64" to 3 1/2" | 85.9 to 89 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 1/2" to 3 39/64" | 88.9 to 92 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 3/4" to 3 27/32" | 94.9 to 98 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
| 3 51/64" to 3 29/32" | 96.4 to 99.5 | 9/32" | No | SAE J1508 | 0.024" | 10 | 0000000 | 0000 |
Double Pinch | ||||||||
| 1/8" to 5/32" | 3.1 to 4.1 | 9/64" | No | SAE J1508 | 0.02" | 25 | 00000000 | 0000 |
| 9/64" to 11/64" | 3.5 to 4.5 | 9/64" | No | SAE J1508 | 0.02" | 10 | 00000000 | 0000 |
| 9/64" to 13/64" | 3.4 to 5 | 13/64" | No | SAE J1508 | 0.02" | 25 | 00000000 | 0000 |
| 13/64" to 9/32" | 5 to 7 | 15/64" | No | SAE J1508 | 0.02" | 25 | 00000000 | 00000 |
| 9/32" to 23/64" | 7 to 9 | 9/32" | No | SAE J1508 | 0.031" | 25 | 00000000 | 00000 |
| 5/16" to 7/16" | 8.1 to 11 | 9/32" | No | SAE J1508 | 0.031" | 25 | 00000000 | 00000 |
| 27/64" to 33/64" | 11 to 13 | 9/32" | No | SAE J1508 | 0.031" | 25 | 00000000 | 00000 |
| 31/64" to 19/32" | 12.5 to 15 | 19/64" | No | SAE J1508 | 0.031" | 25 | 00000000 | 00000 |
| 9/16" to 21/32" | 14 to 17 | 5/16" | No | __ | 0.031" | 10 | 00000000 | 0000 |
| 19/32" to 45/64" | 15 to 18 | 5/16" | No | SAE J1508 | 0.031" | 25 | 00000000 | 00000 |
| 41/64" to 25/32" | 16.2 to 20 | 21/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 45/64" to 55/64" | 18.1 to 22 | 23/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 3/4" to 29/32" | 19.1 to 23 | 23/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 53/64" to 63/64" | 21 to 25 | 25/64" | No | SAE J1508 | 0.039" | 5 | 00000000 | 0000 |
| 7/8" to 1 1/16" | 22.5 to 27 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 15/16" to 1 7/64" | 24 to 28 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 1 1/32" to 1 7/32" | 26.3 to 31 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 1 5/32" to 1 11/32" | 29.3 to 34 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 0000 |
| 1 17/64" to 1 29/64" | 32 to 37 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 00000 |
| 1 3/8" to 1 37/64" | 35 to 40 | 25/64" | No | SAE J1508 | 0.039" | 10 | 00000000 | 00000 |
| 1 31/64" to 1 11/16" | 37.6 to 43 | 25/64" | No | __ | 0.039" | 10 | 00000000 | 00000 |
| 1 39/64" to 1 13/16" | 40.6 to 46 | 25/64" | No | __ | 0.039" | 10 | 00000000 | 00000 |
Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube
Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.
Clamps are for firm plastic and rubber hose and tube. Do not exceed the maximum torque or clamps may be damaged.
410 stainless steel has good corrosion resistance.
304 stainless steel has very good corrosion resistance.
316 stainless steel has excellent corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | SAE No. | Temp. Range, °F | Max. Torque, in.-lbs. | Drive Style | Hex Size | Reusable | Specifications Met | Pkg. Qty. | Pkg. | |
304 Stainless Steel with 410 Stainless Steel Screw | |||||||||||||
| 1" to 1 3/4" | 25 to 45 | 5/8" | 0.028" | 175 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 1 1/4" to 2 1/8" | 32 to 54 | 5/8" | 0.028" | 212 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 1 1/4" to 2 5/8" | 32 to 66 | 5/8" | 0.028" | 262 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 1 3/4" to 2 5/8" | 45 to 66 | 5/8" | 0.028" | 262 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 2" to 4 1/8" | 51 to 104 | 5/8" | 0.028" | 412 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 2 1/4" to 3 1/8" | 57 to 79 | 5/8" | 0.028" | 312 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 2 3/4" to 3 5/8" | 70 to 92 | 5/8" | 0.028" | 362 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 3 1/4" to 4 1/8" | 83 to 105 | 5/8" | 0.028" | 412 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 3 3/4" to 4 5/8" | 95 to 117 | 5/8" | 0.028" | 462 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 4" to 6 1/8" | 102 to 155 | 5/8" | 0.028" | 612 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 4 1/4" to 5 1/8" | 108 to 130 | 5/8" | 0.028" | 512 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 4 3/4" to 5 5/8" | 121 to 143 | 5/8" | 0.028" | 562 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 5 1/4" to 6 1/8" | 133 to 155 | 5/8" | 0.028" | 612 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 5 3/4" to 6 5/8" | 146 to 168 | 5/8" | 0.028" | 662 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 6 1/8" to 9 1/8" | 156 to 231 | 5/8" | 0.028" | 912 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 6 1/4" to 7 1/8" | 159 to 181 | 5/8" | 0.028" | 712 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 6 3/4" to 7 5/8" | 172 to 193 | 5/8" | 0.028" | 762 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 7 1/4" to 8 1/8" | 184 to 206 | 5/8" | 0.028" | 812 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 7 3/4" to 8 5/8" | 197 to 219 | 5/8" | 0.028" | 862 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 8 1/4" to 9 1/8" | 210 to 232 | 5/8" | 0.028" | 912 | -40° to 800° | 80 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Screw | |||||||||||||
| 1" to 1 3/4" | 25 to 45 | 5/8" | 0.028" | 175 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 1 1/4" to 2 1/8" | 32 to 54 | 5/8" | 0.028" | 212 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 1 1/4" to 2 5/8" | 32 to 66 | 5/8" | 0.028" | 262 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 1 3/4" to 2 5/8" | 45 to 66 | 5/8" | 0.028" | 262 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 2 1/8" to 4 1/8" | 51 to 104 | 5/8" | 0.028" | 412 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 2 1/4" to 3 1/8" | 57 to 79 | 5/8" | 0.028" | 312 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 1 | 0000000 | 0000 |
| 2 3/4" to 3 5/8" | 70 to 92 | 5/8" | 0.028" | 362 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 3 1/4" to 4 1/8" | 83 to 105 | 5/8" | 0.028" | 412 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 3 3/4" to 4 5/8" | 95 to 117 | 5/8" | 0.028" | 462 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 4" to 6 1/8" | 102 to 155 | 5/8" | 0.028" | 612 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 4 1/4" to 5 1/8" | 108 to 130 | 5/8" | 0.028" | 512 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 4 3/4" to 5 5/8" | 121 to 143 | 5/8" | 0.028" | 562 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 5 1/4" to 6 1/8" | 133 to 155 | 5/8" | 0.028" | 612 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 5 3/4" to 6 5/8" | 146 to 168 | 5/8" | 0.028" | 662 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 0000 |
| 6 1/8" to 9 1/8" | 156 to 231 | 5/8" | 0.028" | 912 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 6 1/4" to 7 1/8" | 159 to 181 | 5/8" | 0.028" | 712 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 6 3/4" to 7 5/8" | 172 to 193 | 5/8" | 0.028" | 762 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 7 1/4" to 8 1/8" | 184 to 206 | 5/8" | 0.028" | 812 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 7 3/4" to 8 5/8" | 197 to 219 | 5/8" | 0.028" | 862 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
| 8 1/4" to 9 1/8" | 210 to 232 | 5/8" | 0.028" | 912 | -50° to 800° | 50 | Slotted External Hex | 5/16" | Yes | SAE J1508 | 2 | 0000000 | 00000 |
Vibration-Resistant Pinch Clamps for Soft Hose and Tube
A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.
The insert bridges the gap in the ear to create a 360° seal. Install by crimping the pinch point with pinch-clamp pincers. Clamps are for use with soft hose and tube, such as silicone. They have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | ||||||
|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Reusable | Pkg. Qty. | Pkg. | |
304 Stainless Steel with 302 Stainless Steel Insert | |||||||
Single Pinch | |||||||
| 3/32" to 7/64" | 2.5 to 2.9 | 7/32" | 0.02" | No | 10 | 00000000 | 000000 |
| 7/64" to 1/8" | 2.7 to 3.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 7/64" to 9/64" | 2.9 to 3.7 | 7/32" | 0.02" | No | 10 | 00000000 | 00000 |
| 1/8" to 11/64" | 3.3 to 4.2 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |
| 9/64" to 3/16" | 3.7 to 4.7 | 7/32" | 0.02" | No | 10 | 00000000 | 00000 |
| 11/64" to 13/64" | 4.2 to 5.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/16" to 7/32" | 4.7 to 5.7 | 7/32" | 0.02" | No | 10 | 00000000 | 0000 |
| 13/64" to 1/4" | 5.2 to 6.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 15/64" to 9/32" | 5.9 to 7 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 9/32" to 21/64" | 7 to 8.2 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 5/16" to 3/8" | 8 to 9.5 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 21/64" to 25/64" | 8.5 to 10 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 11/32" to 13/32" | 8.8 to 10.5 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/8" to 7/16" | 9.6 to 11.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 27/64" to 1/2" | 10.6 to 12.6 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 29/64" to 17/32" | 11.3 to 13.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 31/64" to 9/16" | 12.3 to 14.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 35/64" to 41/64" | 13.9 to 16.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 37/64" to 21/32" | 14.6 to 16.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 5/8" to 45/64" | 15.6 to 17.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 43/64" to 49/64" | 17.1 to 19.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 3/4" to 53/64" | 18.8 to 21.1 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 51/64" to 57/64" | 20.2 to 22.8 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 29/32" to 1" | 23 to 25.6 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 59/64" to 1 1/32" | 23.3 to 26.3 | 7/32" | 0.02" | No | 10 | 000000000 | 0000 |
| 1 3/64" to 1 3/16" | 26.5 to 30 | 7/32" | 0.02" | No | 10 | 000000000 | 00000 |
Pinch Clamp Pliers
Straight Jaw
Straight and Side Jaw
Crimp pinch clamps closed on hose and tube. Also known as pinch clamp pincers.
Straight jaw pliers must be used perpendicular to the hose.
Straight and side jaw pliers are good for tight spaces because you can use it parallel or perpendicular to the hose.