About Hose
More
High-Pressure Wet-Food and Beverage
Hose with Quick-Clamp Sanitary Fittings
- Temperature Range: -40° to 240° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Maximum Pressure: 250 psi @ 72° F
- Material: Chlorobutyl Rubber with EPDM Rubber Cover
- Color: Gray
- Specifications Met: 3-A Certified 18-03, 3-A Certified 62-02, FDA Compliant 21 CFR 177.2600
Transport wet food and drink at high pressures with a hose connected by sanitary fittings. The hose is strengthened with yarn to handle high-pressure vacuum and suction without getting kinked or crushed. Also known as brewer's and vintner's hose, it's FDA compliant and 3-A certified. The fittings are also 3-A certified, so it's safe for use with food. However, you shouldn't use it with oily substances. The hose and fittings stand up to frequent hot water and chemical cleanings. Since it's interior is smooth, food won't get caught or build up inside the hose. It has an EPDM cover that won't tear, so you can drag it across shop floors. It's not for continuous steam service.
The fittings are also called tri-clamp fittings. They attach to other quick-clamp fittings with a gasket and a clamp.
For technical drawings and 3-D models, click on a part number.
| Flange OD | ID | OD | Bend Radius | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | |
316 Stainless Steel Quick-Clamp Sanitary × 316 Stainless Steel Quick-Clamp Sanitary | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.992" × 0.992" | 1/2" | 1" | 2 1/2" | 000000000 | |||||
| 0.992" × 0.992" | 3/4" | 1 7/16" | 3 1/2" | 000000000 | |||||
| 1.984" × 1.984" | 1" | 1 11/16" | 3 1/2" | 000000000 | |||||
| 1.984" × 1.984" | 1 1/2" | 2 3/16" | 4 1/2" | 000000000 | |||||
| 2.516" × 2.516" | 2" | 2 13/16" | 7" | 000000000 | |||||
| 3.047" × 3.047" | 2 1/2" | 3 5/16" | 13" | 000000000 | |||||
| 3.579" × 3.579" | 3" | 3 13/16" | 16" | 000000000 | |||||
High-Pressure Wet-Food and Beverage Hose
- Temperature Range: -40° to 240° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: Chlorobutyl rubber with an EPDM rubber cover
- Color: Gray
- Compatible Hose Fittings: Cam-and-Groove
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Also called brewer's and vintner's hose, it's FDA compliant and 3-A certified, so it's safe to use with wet food and drinks. However, you shouldn't use it with oily food. It's made of chlorobutyl, which means it stands up to frequent hot water and chemical cleanings. Since it's interior is smooth, food won't get caught or build up inside the hose. This hose has an EPDM cover that won't tear, so you can drag it across shop floors. It's not for continuous steam service.
For technical drawings and 3-D models, click on a part number.
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Specifications Met | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
250 psi @ 72° F Max. Pressure | |||||||
| 1/2" | 1" | 2 1/2" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 000000 | 000000 |
| 3/4" | 1 7/16" | 3" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
| 1" | 1 11/16" | 3 1/2" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
| 1 1/2" | 2 3/16" | 4 1/2" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
| 2" | 2 13/16" | 7" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
| 2 1/2" | 3 5/16" | 13" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
| 3" | 3 13/16" | 16" | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 100 | 000000000 | 00000 | 00000 |
High-Pressure Wet-Food and Beverage Hose
with Cam-and-Groove Socket and Plug
- Temperature Range: -40° to 240° F
- Maximum Vacuum: 29 in. of Hg @ 72° F
- Material: Chlorobutyl Rubber with EPDM Rubber Cover
- Color: Gray
- Specifications Met: 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line. Also called brewer’s and vintner’s hose, it’s FDA compliant for safe use with food and 3-A certified for its sanitary design. However, you shouldn't use it with oily food. It’s made of chlorobutyl, so it won't corrode when washed repeatedly with hot water and cleaning solutions. Since it's interior is smooth, food won't get caught or build up inside the hose. The cover is made of abrasion-resistant EPDM, so you can drag it across shop floors. Hose is not for continuous steam service. To connect fittings, insert the plug into the socket and push the levers down.
For technical drawings and 3-D models, click on a part number.
| Coupling Size | ID | OD | Bend Radius | Maximum Pressure | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 30 ft. | 50 ft. | |
316 Stainless Steel Cam-and-Groove Female Socket × 316 Stainless Steel Cam-and-Groove Male Plug | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4 × 3/4 | 3/4" | 1 7/16" | 3 1/2" | 250 psi @ 72° F | 000000000 | |||||||
| 1 × 1 | 1" | 1 11/16" | 3 1/2" | 250 psi @ 72° F | 000000000 | |||||||
| 1 1/2 × 1 1/2 | 1 1/2" | 2 3/16" | 4 1/2" | 250 psi @ 72° F | 000000000 | |||||||
| 2 × 2 | 2" | 2 13/16" | 7" | 250 psi @ 72° F | 000000000 | |||||||
| 3 × 3 | 3" | 3 13/16" | 16" | 250 psi @ 72° F | 000000000 | |||||||
Heated High-Pressure Wet-Food and Beverage Hose with Sanitary Fittings
- Temperature Range: 72° to 450° F
- Maximum Vacuum: 28" of Hg @ 70° F
- Material: PTFE with Vinyl Plastic Cover and 304 Stainless Steel Braid
- Color: Blue
- Environmental Rating: IP65
- Specifications Met: FDA Compliant 21 CFR 177.2600
Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops. This hose is lined with heating wire. To regulate heat output, a built-in thermocouple measures the hose’s temperature and sends it to your temperature switch or controller (required but not included).
This hose is FDA compliant, so it’s safe to use with food. A stainless steel braid strengthens the hose and resists chemicals commonly found in cleaning processes for food plants. To prevent damage to the braid, a vinyl cover surrounds it. Rated IP65, this hose also seals out spraying water.
The fittings on this hose are also called tri-clamp fittings. They attach to other quick-clamp fittings with a gasket and a clamp.
| Flange OD | ID | OD | Bend Radius | Maximum Pressure | Thermocouple Type | Wire Connection Type | Voltage | Current, A | Each | |
10 ft. Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.992" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 000000000 |
| 0.992" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 00000000 |
| 1.485" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 00000000 |
25 ft. Lg. | ||||||||||
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.992" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
| 0.992" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
| 1.485" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
50 ft. Lg. | ||||||||||
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.992" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
| 0.992" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
| 1.485" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
Wet-Food and Beverage Hose for High Alcohol Content
- Temperature Range: -30° to 210° F
- Maximum Vacuum: 26" of Hg @ 72° F
- Material: UHMW Polyethylene
- Color: Green
- Compatible Hose Fittings: Quick-Clamp Sanitary
Suction, transfer, and dispense wet food and beverages with up to 99% alcohol concentrations. This hose is FDA compliant and 3-A certified, so it’s safe to use with liquors, acidic beverages, and distillation byproducts. Made of UHMW polyethylene, it won't impart tastes or odors on your product. Also called distillery hose, it’s easy to clean and won’t wear down or leave marks if dragged. It’s also oil, chemical, and ozone resistant. The interior of the hose is reinforced with yarn and steel, so it holds its shape when attached to a vacuum pump.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Bend Radius | Max. Pressure | Specifications Met | Max. Continuous Lg., ft. | Per Ft. | |
| 1" | 1 1/2" | 4" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 000000 |
| 1 1/2" | 2" | 6" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 00000 |
| 2" | 2 1/2" | 8" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 50 | 0000000 | 00000 |
Wet-Food and Beverage Hose for High Alcohol
Content with Quick-Clamp Sanitary Fittings
- Temperature Range: -30° to 210° F
- Maximum Vacuum: 26" of Hg @ 72° F
- Material: UHMW Polyethylene
- Color: Green
Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings. Also known as distillery hose, this hose is UHMW polyethylene, so it won't crack or degrade while moving liquid with a 99% alcohol concentration. It also won’t impart tastes or odors on the contents of your line. This hose is FDA compliant and its fittings are 3-A certified, so it’s safe to use with food. Both the hose and fittings stand up to repeated rinsing with water and mild chemicals, making it a good choice for food and beverage processing environments. The hose also won’t wear down or leave marks if dragged, become brittle from oil, or break down from ozone. Reinforced with yarn and steel wire, this hose holds its shape and won’t collapse when hooked up to a vacuum pump.
The fittings are also known as tri-clamp fittings. Attach them to other quick-clamp fittings with a gasket and a clamp.
For technical drawings and 3-D models, click on a part number.
| Flange OD | ID | OD | Bend Radius | Max. Pressure | Specifications Met | 5 ft. | 10 ft. | 15 ft. | 20 ft. | |
316 Stainless Steel Quick-Clamp Sanitary × 316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1.984" × 1.984" | 1" | 1 1/2" | 4" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||
| 1.984" × 1.984" | 1 1/2" | 2" | 6" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||
| 2.516" × 2.516" | 2" | 2 1/2" | 8" | 150 psi @ 72° F | 3-A Certified 62-02, FDA Compliant 21 CFR 177.1520 | 0000000 | ||||