For Use On For Use On |
---|
Formulation Formulation |
---|
|
Container Type Container Type |
---|
![]() | ![]() |
Cartridge | Tube |
![]() | ![]() |
Bottle | Can |
![]() | ![]() |
Aerosol Can | Brush-Top Bottle |
![]() | ![]() |
Sausage Pack | Spray Bottle |
For Joining For Joining |
---|
For Use With For Use With |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Manufacturer Model Number Manufacturer Model Number |
---|
Manufacturer Manufacturer |
---|
|
|
For Use Outdoors For Use Outdoors |
---|
|
Container Size Container Size |
---|
Application Application |
---|
|
Hardness Rating Hardness Rating |
---|
|
|
Hardness Hardness |
---|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Clarity Clarity |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Structural Adhesives
More
About Sealant Flexibility
More
About Paint and Protective Coatings
More
Noncorrosive Silicone Sealants


Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Silicone | ||||||||||||
SI 5011 CL | 2.7 | Tube | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | Clear | 0000000 | 000000 |
SI 5011 CL | 10.1 | Cartridge | 20 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 20A) | -75° to 400° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | Clear | 0000000 | 00000 |
SI 5109 | 10.1 | Cartridge | 60 min. | 24 hrs. | 300% | Not Rated | Soft (Durometer 18A) | -75° to 600° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | Red | 0000000 | 00000 |
Puncture-Resistant Sealants


Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
Structural Sealants

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||
1-A | 10.1 | Cartridge | 6 hrs. | 7 days | 550% | -35% to 35% | Medium Soft (Durometer 35A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 0000000 | 000000 | |
15LM | 10.1 | Cartridge | 6 hrs. | 7 days | 700% | -50% to 100% | Soft (Durometer 20A) | -40° to 170° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | 00000000 | 00000 |
Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
Structural Oil- and Fuel-Resistant Sealants

Impervious to the swelling effects of oils, fuels, and solvents, use this high-strength silicone sealant to assemble and repair fuel systems and tanks. Silicone forms a tough, rubbery, UV-resistant seal that remains flexible over time. It's non-sagging, so it won't drip from vertical and overhead surfaces. Also known as RTV (room-temperature vulcanizing).
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. This sealant is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Dow Corning Silicone | |||||||||||||
730 FS | 3 | Tube | 12 min. | 24 hrs. | 200% | Not Rated | 300 | Medium Soft (Durometer 40A) | -70° to 350° | Metal, Plastic, Rubber, Composites, Masonry | White | 0000000 | 0000000 |
Chemical-Resistant Sealants

Designed to withstand extreme environments, these Viton® fluoroelastomer sealants have excellent resistance to sulfuric acid, hydrochloric acid, nitric acid, gasoline, fuels, and crude oil. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Viton® Fluoroelastomer | ||||||||||||
2.5 | Cartridge | 5 min. | 3 days | 300% | -25% to 25% | 700 | Medium Hard (Durometer 65A) | -40° to 400° | Metal, Masonry | Black | 00000000 | 000000 |
11 | Cartridge | 5 min. | 3 days | 300% | -25% to 25% | 700 | Medium Hard (Durometer 65A) | -40° to 400° | Metal, Masonry | Black | 00000000 | 000000 |
Self-Leveling Chemical-Resistant Sealants


Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to sulfuric acid, hydrochloric acid, nitric acid, gasoline, and oil. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
Viton® Fluoroelastomer | |||||||||||||
2.5 oz. | Cartridge | 5 min. | 3 days | 400% | -25% to 25% | 1,000 | Medium Hard (Durometer 60A) | -40° to 400° | Black | Metal, Masonry | __ | 00000000 | 000000 |
11 oz. | Cartridge | 5 min. | 3 days | 400% | -25% to 25% | 1,000 | Medium Hard (Durometer 60A) | -40° to 400° | Black | Metal, Masonry | __ | 00000000 | 000000 |
16 oz. | Can | 2 min. | 24 hrs. | 150% | Not Rated | 1,500 | Hard (Durometer 75A) | -20° to 450° | Black | Metal, Masonry | CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 0000000 | 000000 |
32 oz. | Can | 2 min. | 24 hrs. | 150% | Not Rated | 1,500 | Hard (Durometer 75A) | -20° to 450° | Black | Metal, Masonry | CT, DC, DE, Los Angeles County, CA, MA, MD, ME, NJ, Northern VA, NY, Orange County, CA, PA, RI, Riverside County, CA, San Bernardino County, CA, UT, VT | 0000000 | 000000 |
1 gal. | Can | 2 min. | 24 hrs. | 150% | Not Rated | 1,500 | Hard (Durometer 75A) | -20° to 450° | Black | Metal, Masonry | CT, DC, DE, Los Angeles Area, MA, MD, ME, NJ, Northern VA, NY, PA, RI, UT, VT | 0000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||||
1C SL | 10.1 | Cartridge | 2 hrs. | 5 days | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 000000 |
1C SL | 29 | Cartridge | 2 hrs. | 5 days | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
High-Strength Concrete Joint Sealants


Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikasil Silicone | ||||||||||||||
728 NS | 29 | Cartridge | 25 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 10A) | 1" | 1/2" | -80° to 350° | Metal, Plastic, Rubber, Composites, Masonry, Wood | Limestone | 0000000 | 000000 |
Silicone | ||||||||||||||
__ | 20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
__ | 29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
Primer for Sika Sikasil Sealant (8-oz. Bottle) | 0000000 | Each | 000000 |
Textured Concrete Joint Sealants

The textured finish matches concrete surfaces. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Primer 260 cannot be sold to CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, VT; Northern VA; Los Angeles County, CA; Orange County, CA; Riverside County, CA; or San Bernardino County, CA, due to regulatory limits on VOCs (volatile organic compounds).
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||||
Textured | 10.1 | Cartridge | 6 hrs. | 7 days | Not Rated | -25% to 25% | Soft (Durometer 30A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 000000 |
Roof Joint Sealants

Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Thermoplastic | ||||||||||||
10.1 | Cartridge | 25 min. | 14 days | 560% | -12.5% to 12.5% | 500 | Medium Soft (Durometer 35A) | -40° to 180° | Metal, Rubber, Masonry, Wood | Clear | 0000000 | 000000 |
Instant-Bond Adhesives

Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
240 works especially well on porous materials.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||
105 | 1 | Bottle | 0.004" | 10 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 180° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
200 | 1 | Bottle | 0.015" | 15 sec. | 24 hrs. | Thick Liquid (1,500 cP) | -65° to 180° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
240 | 1 | Bottle | 0.017" | 15 sec. | 24 hrs. | Thick Liquid (1,850 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
910 | 1 | Bottle | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 190° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
910 | 16 | Bottle | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 190° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
High-Temperature Instant-Bond Adhesives

These super glues withstand high temperatures. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||||
820 | 1 | Bottle | 0.006" | 10 sec. | 24 hrs. | __ | Room Temperature | Thin Liquid (100 cP) | -65° to 390° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
920 | 1 | Bottle | 0.006" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thin Liquid (80 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
922 | 1 | Bottle | 0.017" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thick Liquid (1,600 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
Quick-Set Instant-Bond Adhesives

Form bonds in 5 seconds or less with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
Permabond Adhesives | ||||||||||||
102 | 1 | Bottle | 0.006" | 5 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | MIL-A-46050 Type II Class 2 | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
268 | 1 | Bottle | 0.017" | 5 sec. | 24 hrs. | Thick Liquid (1,800 cP) | -65° to 180° | Clear | MIL-A-46050 Type II Class 3 | Ceramic, Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
Flexible Instant-Bond Adhesives

Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
4902 fluoresces under UV light for easy inspection.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||
4902 | 0.7 | Bottle | 0.004" | 10 sec. | 24 hrs. | Thin Liquid (200 cP) | 155% | -65° to 180° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000000 | 000000 |
High-Temperature Wicking Instant-Bond Adhesives

These super glues withstand temperatures up to 480° F. They have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Permabond Adhesives | |||||||||||||
919 | 1 | Bottle | 0.002" | 10 sec. | 6 hrs. | 4 hrs. air dry then 2 hrs. @ 305° F | Heat, Room Temperature | Thin Liquid (4 cP) | -65° to 480° | Clear | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
Quick-Set Wicking Instant-Bond Adhesives

For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
Permabond Adhesives | ||||||||||||
101 | 1 | Bottle | 0.002" | 5 sec. | 24 hrs. | Thin Liquid (3 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097, MIL-A-46050 Type II Class 1 | Composites, Metal, Plastic, Rubber | 0000000 | 000000 |
910FS | 1 | Bottle | 0.002" | 5 sec. | 24 hrs. | Thin Liquid (3 cP) | -65° to 190° | Clear | Commercial Standard A-A-3097, MIL-A-46050 Type I Class 1 | Composites, Metal, Plastic, Rubber | 0000000 | 00000 |
Light-Activated Instant-Bond Adhesives

For easy positioning, these adhesives begin to harden only when exposed to light.
Thin liquids flow to fill small gaps between close-fitting parts.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Light Intensity Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
4311 | 1 | Bottle | 0.008" | 5 sec. | 24 hrs. | 10 sec. @ 30 mW/cm2 | UV Light, Visible Light | Thin Liquid (1,050 cP) | -65° to 200° | Green | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000 | 000000 |
Spray Adhesives for Viton® Fluoroelastomer Rubber

Splice rubber O-rings and other gaskets with this chemical resistant adhesive. It cannot be sold to Canada due to chemical regulations.
Container Size, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
12 | 19 sq. ft. @ 2.5 gm/ft² | 5 sec. | 48 hrs. | 150 | -40° to 400° | Black | Ceramic, Fabric, Metal, Rubber, Wood | Canada | 000000 | 000000 |
Primers for Instant-Bond Adhesives


Improve instant-bond adhesive performance on hard-to-bond slippery plastics. These primers cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).
Primers in brush-top bottles also include a spray head for easy dispensing.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Drying Time, sec. | Consistency | Viscosity, cP | Color | Cannot Be Sold To | Each | |
Loctite® Primers | |||||||||
7701 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | Clear | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 |
770 | 1.75 | Brush-Top Bottle, Spray Bottle | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
770 | 16 | Can | 30 | Thin Liquid | 1 | White | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 00000000 | 00000 |
Flexible Chemical-Resistant Coatings


Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.
Apply coatings in a bottle and can with a brush or roller. The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size | Composition | Touch, min. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
Viton® Fluoroelastomer—Aerosol Can | ||||||||||||
12 oz. | Solvent Based | 10 | 24 | 13 sq. ft. @ 1 mil | __ | __ | 400° | 60° to 90° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Flat) | 000000 | 000000 |
Viton® Fluoroelastomer—Bottle and Can | ||||||||||||
1 qt. | Solvent Based | 10 | 24 | 70 sq. ft. @ 1 mil | 27:1 | 8 | 400° | 40° to 90° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Flat) | 000000 | 000000 |