Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment.

Non-resettable counters prevent tampering and accidental loss of data.

For technical drawings and 3-D models, click on a part number.

Wire these counters up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. They have two displays. One display shows a set point and the other counts incoming pulses. When the counter reaches the set point, an output relay sends a signal to another device. The signal can start/stop a process or trigger an alarm.

For technical drawings and 3-D models, click on a part number.

For quick installation, this counter fits standard DIN panel cutouts. Wire it up to an electrical pulse-emitting switch, sensor, or encoder for use on machine tools, packaging machinery, or other equipment. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. A gasket provides protection from direct water sprays (meets IP65). UL Recognized Component, C-UL Recognized Component, and CE marked, this counter meets American, Canadian, and European safety standards.

The digits displayed on these counters are visible up to 100 ft. away and the display can be adjusted to suit lighting conditions. You can set counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. They can be wired for remote reset. An output relay sends a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm. Counters are protected from dust and washdowns and can be used outdoors (rated NEMA 4X). Programming backup maintains settings if power is lost.

You can set these counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. An output relay sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm. If power is lost, count backup maintains the count and programming backup maintains settings.

Password lockout prevents tampering and accidental loss of data. A scaling function lets you adjust the unit of measure to suit your application.

Counter rated NEMA 4X is protected from dust and washdowns and can be used outdoors.

For technical drawings and 3-D models, click on a part number.

You can set these counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. Count backup maintains the count if power is lost.

Counters with programming backup maintain settings if power is lost. Password lockout prevents tampering and accidental loss of data. A scaling function lets you adjust the unit of measure to suit your application.

For technical drawings and 3-D models, click on a part number.

The digits displayed on these counters are visible up to 100 ft. away and the display can be adjusted to suit lighting conditions. You can set counters up to count with or without voltage inputs based on the switch, sensor, or encoder you have. Counters can be wired for remote reset. They are protected against dust and washdowns and can be used outdoors (rated NEMA 4X). Programming backup maintains settings if power is lost.

This counter does not require voltage to register a count. It is protected from dust and washdowns and can be used outdoors (rated NEMA 4).

For technical drawings and 3-D models, click on a part number.

Count metallic objects as they touch or pass within 0.059" of this counter's built-in sensor. It has an output relay to send a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm. A scaling function lets you adjust the unit of measure to suit your application. Counter and enclosure are protected from dust and washdowns and can be used outdoors (rated NEMA 4X). Drill through the back of the enclosure to mount to a wall or work surface.

Display running time on a machine so you can schedule preventative maintenance.

Non-resettable counters prevent tampering and accidental loss of data.

Counters that are rated NEMA 4X are protected from dust and washdowns and can be used outdoors.

Display running time on a machine so you can schedule preventative maintenance. These counters have two displays. One display shows the total running time and cannot be reset; the other shows the time elapsed since the last maintenance and can be wired for remote reset. The output relay turns on an indicator light and sends a signal to another device when the counter reaches a set point. The signal can start/stop a process or trigger an alarm.

Display running time on a machine so you can schedule preventative maintenance.

Non-resettable counter prevents tampering and accidental loss of data.

This meter does not require voltage to register a count. It is protected from dust, water, and splashing oil and coolant (meets IP65, NEMA 4X, NEMA 12). Use it to display running time on a machine so you can schedule preventative maintenance.

Wire these counters/ratemeters to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. A scaling function lets you adjust the unit of measure to suit your application. Use the toggle button to switch between the count and the rate. Counter/ratemeter is protected from dust and washdowns and can be used outdoors (rated IP65).

For technical drawings and 3-D models, click on a part number.

For quick installation, these counters/ratemeters fit a standard 1/8 DIN panel cutout. Wire them up to an electrical pulse-emitting switch, sensor, or encoder to count input while tracking rates in units such as gallons per minute. The scaling function lets you adjust the unit of measure to suit your application. Counters are protected from dust and washdowns and can be used outdoors (rated NEMA 4X).

Optional output relays send a signal to another device when a set point is reached. The signal can start/stop a process or trigger an alarm.

For technical drawings and 3-D models, click on a part number.