The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces.

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Made of woven polyethylene fabric, this is the most puncture-, abrasion-, and tear-resistant surface protection we offer. Commonly used on heavy equipment, it guards metal, plastic, composite, and painted surfaces from damage. It can also be used as a protective layer beneath other materials.

Commonly used on stair rails, vehicle panels, and heavy equipment, this durable rubber film is tear resistant. Use it to protect metal, wood, plastic, composite, and painted surfaces from damage.

Often used to protect sheet metal during fiber and CO2 laser cutting, this film is also good for other fabrication processes such as bending, stamping, and forming. You can even leave this film on finished parts for protection against damage during shipping and storage.

In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools.

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

Impact causes these porous bronze plates to release a thin layer of oil on the surface to minimize friction. Often found on conveyor systems and fabricating machinery, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose.

This trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Connect two panels while protecting the edges from damage.

These stops have a metal stem and base for strength and durability. Use them to protect walls from doors in high-traffic applications.

Designed to withstand impact in high-traffic areas, these stops have an anchor that mounts in a hole and sets with grout. Install them in concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

Keep sliding doors and panels from damaging walls and door frames.

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Industrial-strength metal bumpers bounce back from impact caused by forklifts and small trucks. Install them individually, side-by-side, or one above the other on one or both sides of your door.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it.

Flip holders down to keep doors open; flip up to release.

Latch your door to the wall for a secure hold.

Small enough to slip into a pocket, these foldable wedges are good for workers who frequently need to prop doors open as they move from job to job. Slide them under the door to hold it open.

Push your door open to automatically engage the holder; pull on the door to release.

A magnet holds the door open; pull on the door to release.

Latch your door to the floor for a secure hold.