Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Also known as Oilite® bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Good for underwater applications, these bearings won’t swell or warp when wet.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

A metal backing adds strength.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.