These metric stainless steel screws have good chemical resistance and may be mildly magnetic. A curved washer protects delicate surfaces while providing constant tension. Also known as Square Cone Sems screws, the washer rotates freely but is permanently attached.

A zinc plating provides mild corrosion resistance.

Made from stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. The washer has sharp internal teeth that dig into surfaces to resist large amounts of vibration while the smooth outside edge provides a finished look. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric screws have a washer with sharp internal teeth that dig into surfaces to resist large amounts of vibration. The smooth outside edge of the washer provides a finished look. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric screws have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric stainless steel screws have good chemical resistance and may be mildly magnetic. All have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

When compressed, the split lock washer flattens to add tension and prevent loosening from small amounts of vibration. Also known as Sems screws, the washer rotates freely but is permanently attached.

Made from 18-8 stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

These metric 316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

Comparable in diameter to a washer, the flange on these screws distributes pressure better than standard flanged screws. Made from 316 stainless steel, they have excellent resistance to chemicals and salt water. Screws may be mildly magnetic.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. The flange is wider and thicker than our other flanged screws, so they distribute pressure the best.

These aluminum screws are lightweight and resist corrosion in wet environments. They have a flange that is wider and thicker than our other flanged screws, so they distribute pressure the best.

These metric screws have a silicone O-ring that prevents leaks and seals out contaminants. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

To prevent unwanted removal, these screws have a tamper-resistant Torx drive—also known as a pin-in Torx drive—that makes them difficult to unscrew without special tools. An O-ring under the head blocks leaks and seals out dust and dirt.

A flange under the head distributes holding pressure and reduces the risk of crushing thin metal.

A free-rotating, permanently attached washer distributes holding pressure over a wider area than a flange and remains stationary to prevent scratching the material surface as you tighten the screw.

Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.

These steel screws are zinc plated to resist corrosion in wet environments.

Made from 18-8 stainless steel, these screws are chemical resistant.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Serrations under the head act as a brake to prevent over-tightening and damaging threads.

The extra-wide truss head distributes holding pressure to reduce the risk of crushing thin metal.

These 18-8 stainless steel screws have a hardened steel drill point to penetrate steel and are coated to increase corrosion resistance.

These screws have the strength of 410 stainless steel with added corrosion resistance.

These steel screws are available with corrosion resistant finishes. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Known for their strength, these alloy steel screws are coated to provide corrosion resistance in wet environments.

One-third the weight of steel, aluminum screws resist corrosion in wet environments.

These steel screws are zinc plated to resist corrosion in wet environments.

These screws have a hex head for a secure grip with a wrench.

With a low-profile rounded head that’s flanged to sit flush for a finished appearance, these screws press threads into wood on cabinets, trim, molding, and light duty framing.

These 316 stainless steel screws have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. The flange distributes pressure over the surface, eliminating the need for a washer.

Made to Japanese Industrial Standards, these Class 10.9 steel screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. The flange eliminates the need for a washer.

Choose these metric screws for fastening most machinery and equipment. With a flange distributing pressure where the screw meets the surface, there is no need for a separate washer.

Made from 18-8 stainless steel, these screws have good chemical resistance. A flange under the head distributes pressure over the surface, eliminating the need for a washer.

For strength comparable to that of Grade 9 steel and the corrosion resistance of stainless steel, choose these screws. They are work-hardened for extreme strength. The flange eliminates the need for a separate washer.

Made from Grade 5 steel, these screws are suitable for fastening most machinery and equipment. Serrations under the flange provide mild vibration resistance.

Choose these metric screws for high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are about 10% stronger than medium-strength steel screws. Their serrated flange helps to resist vibration.

Made from 18-8 stainless steel, these screws have good chemical resistance. Their flange is serrated to help prevent loosening from vibration.

These general purpose flanged screws distribute pressure where the screw meets the surface, eliminating the need for a washer.

Serrations under the head grip the material's surface for mild vibration resistance. The flange distributes pressure across the material's surface, eliminating the need for a washer.

Stainless steel screws have excellent corrosion resistance in most environments. They have a split lock washer to create tension and resist loosening from vibration.

Good for high-strength fastening, these screws are made from alloy steel comparable in strength to Grade 9 steel. The head makes 12 points of contact with a wrench to handle more torque than a socket head or hex head screw.