For Screw Size For Screw Size | Show |
---|
For Screw Size For Screw Size | Hide |
---|
Material Material |
---|
|
OD OD |
---|
Thickness Thickness |
---|
Washer Type Washer Type |
---|
|
|
Hardness Hardness |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Finish Finish |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Shape Shape |
---|
![]() | Round |
Sleeve OD Sleeve OD |
---|
|
About Washers
More
Metric General Purpose Washers




Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Stainless steel washers are more corrosion resistant than steel washers, and almost as strong. 18-8 and 17-7 PH stainless steel washers will hold up in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. 17-7 PH stainless steel washers are stronger than 18-8 stainless steel. Black-oxide 18-8 stainless steel washers have a matte-black finish. More corrosion resistant than 18-8 and 17-7 PH stainless steel, 316 stainless steel washers will not corrode from salt water, chlorine solutions, and chemicals. Stronger and slightly more corrosion resistant than 316 stainless steel, Bumax 109 stainless steel washers are best for marine environments and chemical-processing plants.
Steel washers are stronger and more wear resistant than stainless steel washers. Steel washers without a plating or coating are best for dry environments, since moisture will cause them to rust. Zinc-plated steel washers have an outer layer of zinc that protects the inner steel from rust and extends the life of the washer. Although they are stronger and more wear resistant than stainless steel, they are not as corrosion resistant. Use them in wet environments, but avoid contact with salt water and chemicals. Zinc-flake-coated and black corrosion-resistant-coated steel washers have the same level of corrosion resistance—both resist corrosion from chemicals and withstand 1,000 hours of salt spray. The black corrosion-resistant-coated steel washers have a black semi-gloss finish.
At one-third the weight of steel, aluminum washers are the lightest option. They will not rust in wet environments.
In addition to resisting rust in wet environments, copper and brass washers are electrically conductive.
Washers that meet ISO 7089, 7090, 7091, and 7092 (formerly DIN 125, 126, and 433), meet international standards for fastener dimensions. The ISO 7091 washers have a slightly rougher surface than a typical flat washer.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thickness, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M2.5 | 2.7 | 5.0 | 0.4-0.6 | Rockwell B76 | DIN 433; ISO 7092 | 100 | 000000000 | 00000 |
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Not Rated | DIN 125; ISO 7089 | 100 | 000000000 | 0000 |
17-7 PH Stainless Steel | ||||||||
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Rockwell C40 | DIN 125 | 10 | 000000000 | 0000 |
316 Stainless Steel | ||||||||
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Not Rated | DIN 125; ISO 7089 | 100 | 000000000 | 0000 |
Zinc-Plated Steel | ||||||||
M2.5 | 2.7 | 5.0 | 0.4-0.6 | Rockwell B76 | DIN 433; ISO 7092 | 100 | 000000000 | 0000 |
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Rockwell B75 | DIN 125; ISO 7089 | 100 | 000000000 | 0000 |
Zinc-Plated Steel for Class 8.8 | ||||||||
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Rockwell B91 | DIN 125; ISO 7089 | 100 | 000000000 | 0000 |
Aluminum | ||||||||
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Not Rated | DIN 125; ISO 7089 | 10 | 000000000 | 00000 |
Brass | ||||||||
M2.5 | 2.7 | 5.0 | 0.4-0.6 | Rockwell B76 | DIN 433; ISO 7092 | 100 | 000000000 | 0000 |
M2.5 | 2.7 | 6.0 | 0.4-0.6 | Not Rated | DIN 125; ISO 7089 | 100 | 000000000 | 0000 |
Metric Oversized Washers



Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.
Zinc-plated steel washers have an outer layer of zinc that prevents the steel from rusting in wet areas. Compared to stainless steel, they're stronger, more wear resistant, and less costly, but not as corrosion resistant. Avoid exposing them to salt water and chemicals. Stainless steel washers are more corrosion resistant than steel washers, and almost as strong. Use them in damp and washdown applications without worrying about rust. 18-8 stainless steel and 17-7 PH stainless steel washers have similar qualities to one another, except 17-7 PH stainless steel washers are stronger. Black-oxide 18-8 stainless steel washers resist corrosion just as well as regular 18-8 stainless steel washers and have a matte-black finish. 316 stainless steel washers stand up to salt water, chlorine solutions, and other chemicals without rusting. Washers that meet DIN and ISO specifications, meet international standards for washer dimensions. ISO 8738 is formerly DIN 1440. ISO 7093 is formerly DIN 9021.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thick., mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M2.5 | 2.7 | 8.0 | 0.7-0.9 | Rockwell B56 | DIN 9021 | 100 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
M2.5 | 2.7 | 8.0 | 0.7-0.9 | Rockwell B52 | DIN 9021 | 100 | 000000000 | 0000 |
Black-Oxide 18-8 Stainless Steel | ||||||||
M2.5 | 2.7 | 8.0 | 0.7-0.9 | Rockwell B68 | DIN 9021 | 10 | 000000000 | 00000 |
316 Stainless Steel | ||||||||
M2.5 | 2.7 | 8.0 | 0.7-0.9 | Rockwell B75 | DIN 9021 | 100 | 000000000 | 0000 |
ASME Washers for Soft Material

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to limit damage to soft materials.
18-8 stainless steel washers have excellent corrosion resistance in most environments and may be mildly magnetic.
316 stainless steel washers have excellent resistance to chemicals and salt water. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ASME Designation | ID | OD | Thick. | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M2.5 | Narrow | 3.100mm | 5.900mm | 0.600mm-0.900mm | Not Rated | ASME B18.22M | 1 | 000000000 | 00000 |
M2.5 | Regular | 3.000mm | 7.700mm | 0.600mm-0.900mm | Not Rated | ASME B18.22M | 1 | 000000000 | 0000 |
M2.5 | Wide | 3.000mm | 9.700mm | 0.800mm-1.200mm | Not Rated | ASME B18.22M | 1 | 000000000 | 0000 |
316 Stainless Steel | |||||||||
M2.5 | Narrow | 3.100mm | 5.900mm | 0.600mm-0.900mm | Not Rated | ASME B18.22M | 1 | 000000000 | 0000 |
Metric Plastic Washers

These plastic washers are good electrical insulators.
Nylon washers are stronger than polycarbonate and UHMW washers. Exposure to moisture may cause them to expand.
For technical drawings and 3-D models, click on a part number.
Temperature Range, °F | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Screw Size | ID, mm | OD, mm | Thick., mm | Min. | Max. | Hardness | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||
Off-White | |||||||||
M2.5 | 2.7 | 5.6 | 0.6-1.0 | Not Rated | 220° | Rockwell R105 | 100 | 000000000 | 00000 |
Metric Chemical-Resistant Plastic Washers

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease. All are excellent electrical insulators.
PTFE washers withstand high temperatures and have a slippery surface that resists wear in high-friction applications.
PVC washers resist acids and alkalies.
For technical drawings and 3-D models, click on a part number.
Metric Electrical-Insulating Plastic Washers

These washers are excellent electrical insulators.
Hard fiber washers are resistant to organic solvents and petroleum-based oils.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thick., mm | Max. Temperature, °F | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Hard Fiber | |||||||||
---|---|---|---|---|---|---|---|---|---|
Black | |||||||||
M2.5 | 2.7 | 6.5 | 0.4-0.6 | 230° | Not Rated | DIN 125 | 100 | 000000000 | 000000 |
Metric Water- and Steam-Resistant Plastic Washers

Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments. All are good electrical insulators.
Fiberglass washers are stronger than Delrin® acetal plastic washers and have excellent resistance to salt water. Color ranges from light green to light tan.
Delrin® acetal plastic washers combine a slippery, wear-resistant surface with good strength and rigidity.
For technical drawings and 3-D models, click on a part number.
Metric Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.
Zinc- and chrome-plated steel washers are corrosion resistant in wet environments.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Extra-Tall Electrical-Insulating Rolled-Collar Sleeve Washers

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers. As you tighten your screw, the rolled collar compresses under the head to create an insulating barrier between a screw shank and a mating surface. These nylon washers block electrical current and prevent galvanic corrosion from mating different types of metal. Exposure to moisture may cause them to expand.
For technical drawings and 3-D models, click on a part number.
Temperature Range, °F | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Screw Size | ID | OD | Sleeve OD | Overall Ht. | Min. | Max. | Hardness | Color | Pkg. Qty. | Pkg. | |
Nylon Plastic | |||||||||||
M2.5 | 2.600mm | 4.400mm | 3.100mm | 4.800mm | -40° | 180° | Rockwell R118 | Off-White | 25 | 000000000 | 000000 |
Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Clipped Wd. | Thick. | Hardness | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M2.5 | 2.700mm | 6.000mm | 5.200mm | 0.400mm-0.600mm | Rockwell B68 | 10 | 000000000 | 000000 |
Self-Retaining Washers

A specially shaped ID grips your screw shank tightly. All of these washers are good electrical insulators.
Nylon washers are more wear resistant than polyethylene washers. They are not, however, as moisture resistant.
Polyethylene washers are softer, more flexible, and withstand moisture better than nylon washers. They are not as wear resistant.
For technical drawings and 3-D models, click on a part number.
Metric Split Lock Washers








As you tighten a bolt, these metric washers flatten to add tension to the threaded joint and prevent loosening from small amounts of vibration. They meet a DIN or ASME standard for split lock washer dimensions.
Standard split lock washers match with fasteners that have right-hand threads to prevent clockwise rotation. They have uneven split ends that bite into fasteners for a tight grip but won’t work with hardened surfaces. They hold better than curved or wave washers. These washers are not reusable after tightening.
Curved and wave split lock washers can be used with fasteners that have right- or left-hand threads to prevent clockwise and counterclockwise rotation. These washers are reusable—they retain their shape when untightened and will not damage fasteners. Stainless steel washers resist corrosion better than steel and are nearly as strong. 18-8 stainless steel washers withstand humid, damp, and washdown environments but will corrode when exposed to salt water and other chlorine solutions. 316 stainless steel washers resist corrosion from wet environments as well as salt water, chlorine solutions, and chemicals. Stronger and more durable than stainless steel, zinc-plated and yellow zinc-plated steel washers withstand wet environments. However, they will corrode in salt water and chlorine solutions. The zinc plating temporarily protects against rust, but once it wears off, the steel will rust.
Steel washers are stronger and resist wear better than zinc-plated steel and stainless steel washers. Use them in dry environments.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thick., mm | Overall Ht., mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
Standard | |||||||||
M2.5 | 2.9 | 5.1 | 0.5-0.7 | __ | Not Rated | DIN 127B | 100 | 000000000 | 00000 |
Curved | |||||||||
M2.5 | 2.6 | 5.1 | 0.5 | 0.9 | Not Rated | DIN 128A | 100 | 000000000 | 0000 |
316 Stainless Steel | |||||||||
Standard | |||||||||
M2.5 | 2.9 | 5.1 | 0.5-0.7 | __ | Not Rated | DIN 127B | 100 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||||
Standard | |||||||||
M2.5 | 2.9 | 5.1 | 0.5-0.7 | __ | Rockwell C44 | DIN 127B | 100 | 000000000 | 0000 |
Curved | |||||||||
M2.5 | 2.6 | 5.1 | 0.5 | 0.9 | Rockwell C44 | DIN 128A | 100 | 000000000 | 0000 |
Steel | |||||||||
Standard | |||||||||
M2.5 | 2.9 | 5.1 | 0.5-0.7 | __ | Rockwell C44 | DIN 127B | 100 | 000000000 | 0000 |
Curved | |||||||||
M2.5 | 2.3 | 4.6 | 0.6 | 1.1 | Rockwell C44 | DIN 6905 | 200 | 000000000 | 0000 |
Metric External-Tooth Lock Washers

Teeth on the outside edge of these washers bite into the screw head and joint for a tight grip. Use with fasteners that have heads large enough to make contact with the teeth, such as pan, button, and binding head screws.
Zinc-plated steel washers are corrosion resistant in wet environments.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold. Use with fasteners that have heads large enough to make contact with the teeth, such as pan, button, and binding head screws.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thick., mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M2.5 | 2.7 | 5.5 | 0.3-0.5 | Not Rated | DIN 6798 | 100 | 000000000 | 00000 |
Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Use with fasteners that have small heads, such as fillister and cheese head screws.
Black-oxide steel washers are mildly corrosion resistant in dry environments.
Zinc-plated steel washers resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Belleville Spring Lock Washers for Socket Head Screws



These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws. Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers. They minimize loosening from wear, temperature changes, and vibration. Serrations on the top and bottom provide extra gripping power. Load-rated Belleville disc springs are also available.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Triple-Wave Washers
With three points of surface contact, these washers provide more stability than single-wave washers. They are curved and flexible to act like springs, compensating for tolerance variations and uneven surfaces. You can also use them to damp vibration.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.


For Screw Size | ID | OD | Thick. | Overall Ht. | Hardness | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
M2.5 | 3.175mm | 6.350mm | 0.127mm | 0.508mm | Rockwell C40 | 10 | 000000000 | 000000 |
Metric Single-Wave Washers


These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces. You can also use them to damp vibration.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID, mm | OD, mm | Thick., mm | Overall Ht., mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M2.5 | 2.7 | 5.0 | 0.3 | 1.4 | Not Rated | DIN 137B | 50 | 000000000 | 000000 |
Aluminum Unthreaded Spacers

Made of aluminum, these spacers are lightweight, nonmagnetic, and mildly corrosion resistant. Material can vary between 6061 and 2011 aluminum.
For technical drawings and 3-D models, click on a part number.
Each | |||||
---|---|---|---|---|---|
Lg., mm | For Screw Size | ID, mm | 1-9 | 10-Up | |
2 | M2.5 | 2.700 | 000000000 | 00000 | 00000 |
3 | M2.5 | 2.700 | 000000000 | 000 | 000 |
4 | M2.5 | 2.700 | 000000000 | 000 | 000 |
5 | M2.5 | 2.700 | 000000000 | 000 | 000 |
6 | M2.5 | 2.700 | 000000000 | 000 | 000 |
8 | M2.5 | 2.700 | 000000000 | 000 | 000 |
10 | M2.5 | 2.700 | 000000000 | 000 | 000 |
13 | M2.5 | 2.700 | 000000000 | 000 | 000 |
14 | M2.5 | 2.700 | 000000000 | 000 | 000 |
16 | M2.5 | 2.700 | 000000000 | 000 | 000 |
19 | M2.5 | 2.700 | 000000000 | 000 | 000 |
20 | M2.5 | 2.700 | 000000000 | 000 | 000 |
25 | M2.5 | 2.700 | 000000000 | 000 | 000 |
18-8 Stainless Steel Unthreaded Spacers

18-8 stainless steel spacers have good corrosion resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Each | ||||||
---|---|---|---|---|---|---|
Lg., mm | For Screw Size | ID, mm | Specifications Met | 1-9 | 10-Up | |
2 | M2.5 | 2.700 | ASTM A582 | 000000000 | 00000 | 00000 |
3 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
4 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
5 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
6 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
8 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
10 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
13 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
14 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
16 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
19 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
20 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
25 | M2.5 | 2.700 | ASTM A582 | 000000000 | 0000 | 0000 |
316 Stainless Steel Unthreaded Spacers

These spacers have excellent corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Zinc-Plated Brass Unthreaded Spacers

Brass makes these spacers electrically conductive and nonmagnetic and the zinc-plated finish provides corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Nylon Unthreaded Spacers


These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.
For technical drawings and 3-D models, click on a part number.
Each | |||||||
---|---|---|---|---|---|---|---|
Lg., mm | For Screw Size | ID, mm | Temperature Range, °F | Specifications Met | 1-9 | 10-Up | |
Off-White | |||||||
2 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 00000 | 00000 |
3 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
4 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
5 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
6 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
8 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
10 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
13 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
14 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
16 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
19 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
20 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
25 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
Black | |||||||
2 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
3 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
6 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |
10 | M2.5 | 2.700 | -30° to 250° | ASTM D4066, ASTM D6779, UL 94 V-2 | 000000000 | 0000 | 0000 |