Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

These thick washers are designed to support structural screws, studs, and nuts.

These metric washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Low moisture absorption and good heat resistance make these metric washers suitable for wet and harsh environments.

These metric washers hold up in blistering temperatures up to 3000° F.

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Sunlight, ozone, and water won’t affect these washers.

These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.