M48 Washers | McMaster-Carr

Filter by

Screw Size

System of Measurement

Washer Type

Thickness

Material

Finish

Specifications Met

RoHS

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

REACH

Hardness

Performance

Extreme Vibration Resistant

Washer Designation

Application

For Bearing Nut Face Style

Stepped

Construction

One Piece

For Bearing Nut Specifications Met

For Use With

Environment

Serration Location

Overall Height

Tab Depth

Tab Width

7 Products

General Purpose Washers

Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.

Stainless Steel About Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	ID, mm	OD, mm	Thk., mm	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M48	49.0	82.5	2.7 to 3.3	1	98689A261	000000

Sealing Washers

Prevent leaks while distributing weight evenly under nuts and screws. These washers compress as you tighten to keep air and fluid in, and dust and contaminants out. Use them anywhere you need a tight seal, such as protecting electronics from moisture or keeping lubricants contained in machinery.

Metal

Also known as crush washers, these are made of soft metal that deforms under pressure to fill gaps around the nut or screw. Often found in oil drain valves, they withstand stress and wear better than plastic and rubber washers, but aren't as leak-resistant. Metal sealing washers are not reusable.

Copper—Softer than aluminum washers, these deform easily to create a tight seal with less effort. They resist rusting in corrosive environments, but will develop a green patina over time.

Cellulose-Filled Copper—The easiest washers to crush. These washers are embedded with cellulose, which makes them more flexible than other metal washers for a tighter seal. They resist rusting in corrosive environments, but will develop a green patina over time.

	ID, mm	OD, mm	Thk., mm	Specs. Met	Pkg. Qty.		Pkg.
Copper



	M48	48.300	54.900	1.8 to 2.2	DIN 7603	1	97725A640	000000


	Cellulose-Filled Copper



			M48	48.300	54.900	2.3 to 2.7	DIN 7603	1	97725A327	00000

Extreme-Vibration-Resistant Wedge Lock Washers

When it's critical to keep bolted assemblies secure, choose these two-piece lock washers with the tightest grip of all. They stop nuts and screws from loosening in heavy machinery that experiences jarring starts and stops, such as compressors and compactors. Serrations on the outside bite into the fastener and mating surfaces, while wedges on the inside lock the two pieces together. When the nut or screw starts to loosen, the wedges drive more tightly together to maintain tension. You can reuse these washers up to fifteen times, as long as the serrations and wedges are not worn down. They are comparable to NORD-LOCK® or Sherex TEC® washers.

Wedge Lock

Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.

	ID	OD	Thk.	Pkg. Qty.		Pkg.
Super-Corrosion-Resistant Zinc-Flake-Coated Steel



	1 7/8", M48	1.950"	2.950"	0.270" to 0.290"	1	91074A370	000000

Split Lock Washers

Stop nuts and screws from loosening due to mild vibration. As you tighten, the uneven ends bite into the nut or screw so it won't back out. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

	ID, mm	OD, mm	Thk., mm	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M48	50.5	75.0	6.8 to 7.2	DIN 127B	1	91202A117	000000

Bearing Spring Lock Washers for Slotted Bearing Nuts


	For Stepped Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle. They also have an inner tab that sits in the shaft or spindle’s keyway to prevent the nut from loosening.

Steel—Steel washers are strong and flexible.

DIN 462—DIN 462 and DIN 5406 washers meet international standards for lock washer dimensions. Pair DIN 462 washers with DIN 1804 bearing nuts, and DIN 5406 washers with DIN 981 bearing nuts.

					Tab, mm
	For Screw Size	ID, mm	OD, mm	Thk., mm	Wd.	Dp.	Overall Ht., mm	Hardness	Specs. Met	For Bearing Nut Specs. Met		Each
For Stepped Nuts





				Steel

				M48	48.000	75.000	1.200	8.000	2.500	5.000	Not Rated	DIN 462	DIN 1804	90407A132	00000

Split Lock Washers for Socket Head Screws

Stop socket head screws from loosening due to mild vibration. These washers have a small diameter to fit under screws with narrow heads, but are still thick enough to keep fasteners secure. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads. Also known as high-collar lock washers.

Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

	ID, mm	OD, mm	Thk., mm	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel



	M48	50.5	67.0	7.7 to 8.3	DIN 7980	1	91190A640	000000