These plastic washers are good electrical insulators.

Nylon washers are stronger than polycarbonate and UHMW washers. Exposure to moisture may cause them to expand. Lubricant-filled nylon washers have a slippery surface that resists wear in high-friction applications.

Polycarbonate washers are more rigid than most plastic washers for high impact resistance. They have good moisture resistance and withstand oil, greases, and detergents.

UHMW washers have excellent moisture and abrasion resistance and good resistance to chemicals.

For technical drawings and 3-D models, click on a part number.

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease. They are excellent electrical insulators.

PTFE washers withstand high temperatures and have a slippery surface that resists wear in high-friction applications.

PVC washers resist acids and alkalies.

For technical drawings and 3-D models, click on a part number.

These washers are excellent electrical insulators.

Polypropylene washers resist organic solvents and degreasing agents.

Phenolic washers have low moisture absorption, so they won’t expand or become brittle over time. Color ranges from red-brown to yellow-brown.

For technical drawings and 3-D models, click on a part number.

Ceramic washers withstand temperatures up to 3000° F. They are good electrical insulators and resist moisture as well as hydrochloric and nitric acid gases. Suitable for use in ovens.

For technical drawings and 3-D models, click on a part number.

Also known as dress washers, these are machined to be sturdier and provide a neater appearance than standard countersunk washers. Flat and oval head screws sit flush within them.

18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.

316 stainless steel washers have excellent resistance to chemicals and salt water. They may be mildly magnetic

Black-oxide steel washers are mildly corrosion resistant in dry environments.

For technical drawings and 3-D models, click on a part number.

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

316 stainless steel washers have excellent resistance to chemicals and salt water. They may be mildly magnetic.

18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.

Zinc- and zinc yellow-chromate plated steel washers are corrosion resistant in wet environments.

Washers that meet ASME B18.21.1 adhere to strict dimensional standards. Steel washers also meet standards for material properties.

For technical drawings and 3-D models, click on a part number.

Also known as high-collar lock washers, these have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws. As a screw is tightened, they flatten to add tension to the joint and prevent loosening from small amounts of vibration.

18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.

316 stainless steel washers have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Washers that meet ASME B18.21.1 adhere to strict dimensional standards. Steel washers also meet standards for material properties.

For technical drawings and 3-D models, click on a part number.

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip. Use with fasteners that have heads large enough to make contact with the teeth, such as pan, button, and binding head screws.

400 series stainless steel washers have excellent wear resistance, but aren’t as corrosion resistant as other stainless steel washers. They may be mildly magnetic.

Washers that meet ASME B18.21.1 adhere to strict dimensional standards.

For technical drawings and 3-D models, click on a part number.

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Use with fasteners that have small heads, such as fillister and cheese head screws.

400 series stainless steel washers have excellent wear resistance, but aren’t as corrosion resistant as other stainless steel washers. They may be mildly magnetic.

Zinc-plated steel washers are corrosion resistant in wet environments.

Bronze washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Washers that meet ASME B18.21.1 adhere to strict dimensional standards. The zinc-plated steel washers also meet standards for material properties.

For technical drawings and 3-D models, click on a part number.

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws. Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers. They minimize loosening from wear, temperature changes, and vibration. Serrations on the top and bottom provide extra gripping power. Load-rated Belleville disc springs are also available.

18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.