We will reply to your message within an hour.
These blowguns have a metal body.
The rubber tip won't damage parts.
Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.
Designed to reduce noise, these blowguns are quieter than similar standard guns.
Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Connect the included hose to your air supply and these blowguns are ready to use.
Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.
Increase your reach with the telescoping nozzle.
The extra length lets you access hard-to-reach areas.
These guns include a rubber tip that won't damage your workpiece.
These blowguns provide more than two times the airflow of standard guns.
Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.
Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.
The most powerful blowguns we sell, these use compressed air to clean and blow debris.
Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.
Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.
Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.
These guns provide more than three times the airflow of standard static-eliminating blowguns.
Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).
Use these O-rings with brass compression tube fittings that have BSPP male threads. They create a seal on the BSPP male threads to guard against leaks.
Use these rings with quick-clamp high-vacuum fittings.
Create airtight seals in high-vacuum systems by placing these rings between two claw-clamp (ISO-K) or bolt-together (ISO-F) fittings.
More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.
A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.