Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Unlike paint that must be diluted, this paint comes ready for use with an air brush.

Make your surface magnetic with this paint.

Mark traffic lanes, parking lots, and factory floors.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.

Seal out moisture on scratched painted metal.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them on structural lumber, decking, and wood shingles.

Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.

Protect sensitive electronic parts, enclosures, and prototypes from electromagnetic interference (EMI) with these coatings.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.

Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.

Increase the wear resistance of thin floor coatings. These additives consist of an aluminum-oxide blend that improves abrasion resistance by up to 40%.

These additives slow down paint’s cure time, allowing it to flow better and fill in brushstrokes for a smooth finish. They also improve adhesion.

Remove grease, oil, and dirt from your concrete floors.

These acid-free rust removers are safe for contact with people and surfaces.