The small dial on these gauges allows for installation in tight spaces.

Measure small pressure changes in ventilation systems, hydraulic applications, and other critical processes.

Sensitive enough to operate on indoor light, these gauges have no batteries to replace. They have a digital display for easy reading of measurements.

Keep tabs on liquid levels in pump and tank applications with these gauges—a dual scale displays pressure in feet of H₂O and psi.

Gauges have an accuracy of ± 0.5% to ± 1%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings.

These gauges have a unique case design that eliminates the air bubble on the dial face, which can distort readings. They have a liquid-filled dial that reduces needle flutter for precise readings in high-vibration applications.

Unlike other gauges that have multiple moving parts that can shake loose, these have only one internal part. They are the most shock-resistant gauges we offer.

Gauges have an accuracy of ± 1% to ± 1.5%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

Check the pressure on your drinking water system with these gauges—they meet NSF/ANSI Standard 61 for safe use with potable water.

Use in low-pressure applications up to 160 psi.

Use in high-pressure applications up to 2,000 psi.

Gauges are UL 393 listed for use with fire-protection service equipment.

Use in high-pressure applications up to 3,000 psi.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

Measure your equipment’s pressure and send the data directly to a development board or single-board computer. Also known as transducers, these transmitters convert pressure into an electrical I²C signal and transmit it to your board.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

At least five times as accurate as standard pressure transmitters, these transmitters sense pressure at an accuracy of ±0.1%, making them ideal for use in laboratories and in analytical testing applications.

Used in food-processing and pharmaceutical plants to automatically compensate for temperature changes and errors caused by vibration, these transmitters have a sanitary design certified by 3-A.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on a display. With two outputs, these transmitters—also known as transducers—can be used as a transmitter, a switch, or both.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.

At least four times as accurate as standard vacuum transmitters, these transmitters sense vacuum at an accuracy of ±0.25%, making them ideal for use in laboratories and in analytical testing applications.

Convert vacuum into an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor vacuum or control equipment.

For use in hazardous locations, these transmitters safely measure the difference in pressure between two process lines in flow applications—such as heat exchangers, chillers, and pumps. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Measure the difference in pressure between two points in flow applications, such as heating, cooling, and pumping systems.