The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

Quickly change spray angles by removing the nozzle and snapping on a new one.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

These nozzles project their spray at a right angle from their threaded connection.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

These nozzles provide a uniform distribution of droplets.

Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

These nozzles produce a flat, thin spray pattern.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

For light duty spray-down applications, attach these wash guns to any standard garden hose.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.

Use these guns to clean as well as apply chemicals and solvents.

Turn ordinary garden-hose water into pressurized water to power away dirt and grime.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Carry these sprayers comfortably on your back using the padded shoulder straps.

To save time and effort when disinfecting bathrooms, worksites, and other large spaces, these sprayers are electric powered, so you don’t need to pump them by hand.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Fill the reservoir, attach the propellant cartridge, and spray.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

Release a fine mist spray similar to an aerosol without propellants or pressure.

Spray at any angle—even upside down.

Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line.

No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling.

Unlike standard spray bottles, these dispense oil and other high-viscosity liquids without clogging.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Loc-Line hose to assemble and disassemble components.

Often used for industrial parts washing and food service applications, these flexible sprayers shoot a concentrated jet of water to blast away dirt and grease.

Convert your blowgun to a spray gun. These nozzles spray air and liquids at the same time.

Twist the barrel to adjust water flow.

Use the lever to turn water flow on and off.

Dispense and control the flow of coolant with these nozzles.

Adjust the flow while dispensing liquid chemicals.