The smooth stainless steel surface allows for easy cleaning. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a spot beam, where the center is brighter than the edges for long-distance illumination. Rated IP04, they withstand liquid splashed from all angles. All stainless steel flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Flashlights with an adjustable beam change from a wide floodlight to a narrow spotlight with a slide focus for one-hand operation. They can operate on either the included rechargeable battery or on four standard AAA alkaline batteries. This flashlight cannot be sold to Canada due to local energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a flood beam that creates a uniform spread of light. This is especially good for close-up tasks and inspection work. Use the momentary light setting when you need light for brief periods—the light only turns on when the button is held down. Rated IP04, they withstand liquid splashed from all angles. Their body is knurled for a nonslip grip. All lights meet ANSI/Plato FL 1, so you'll know they meet performance standards for impact resistance, run time, and beam distance.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Incandescent lights are the traditional lighting choice. Twist the head to change the beam from a wide floodlight to a narrow spotlight.

LED lights produce more light, are more efficient, and generate less heat than incandescent lights. They cast a flood beam, which is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

For technical drawings and 3-D models, click on a part number.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 120° head tilt have a ribbed grip that won’t slip out of your hand.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP04-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Flashlights with a momentary light setting are good when you only need light in short bursts, such as during inspection work. They’ll produce light when you hold down the button.

Flashlights with a spot-to-flood beam let you adjust from a narrow spot beam to a wide flood beam by twisting the head. Flashlights with a spot beam cast a beam with a bright center to light up long distances. Flashlights with a flood beam cast a uniform spread of light to illuminate large areas.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

Style C have a gooseneck arm to direct light where you need it. This makes them a good fit for pockets and clipboards.

Style D have a magnetic back you can stick to metal surfaces, and their two-way clip fits over pockets, straps, and other surfaces. The head rotates 180° to aim light where you need it.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP54-rated flashlights are sealed against dust.

If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Style B come stored in a clear case you can mount to the wall. Mounting hardware is included.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

When the power goes out, these flashlights automatically light up. Keep them plugged in, and they'll switch on when there's an outage. The head tilts so you can aim light wherever you need it. Unplug them to carry them around and use them like a standard flashlight. They have a flat bottom, so you can work hands-free without them rolling away. And if you need a task light, stand them on their end and tilt the light at a right angle. Ideal for lighting up long distances, they cast a spot beam with a bright center. The status indicator lets you know when they need a recharge. Rated IP04, these flashlights withstand liquid splashed from all angles.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP04 flashlights withstand liquid splashed from all angles.

IP07 flashlights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

IP08 flashlights withstand continuous submersion according to the manufacturer's specific conditions; all at least meet IP07 standards for submersion in a maximum of one meter of water for up to 30 minutes.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Krypton flashlights are the same lighting technology as found in a camera flash.

Spot beam flashlights have a bright center for long-distance illumination. Flood beam flashlights are especially good for close-up tasks and inspection work.

Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

CE marked flashlights meet European health, safety, and environmental protection requirements.

Style A have two lenses that can cast light from the top or side of the flashlight. Both have a magnet that allows you to mount them to a nearby surface and keep your hands free for work.

Style B operate like traditional flashlights, but also provide 360° illumination by sliding out the light head. Note: Battery life is significantly reduced when used at the high-beam setting.

Style C switch between red and white light beams with a twist of their head; the red beam is particularly effective when it’s dark out. They also work with non-rechargeable batteries (not included).

Style D have a detachable power bank with a USB connection for charging small devices, such as phones. When they’re separated, cover the exposed ends of the bank and flashlight with the included caps. These flashlights are dimmable, and they revert to their most recent brightness setting when you turn them on.

Style E are also known as dive lights.

Style F come with four additional snap-in plastic lenses that store in the base: blue, red, white, and a diffuser lens.

Because these flashlights are buoyant, they're easy to recover when dropped in the water. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a spot beam that has a bright center for long-distance illumination. They are rated IP04 to withstand liquid from all directions. These flashlights meet ANSI/Plato FL 1, so they've been tested for impact resistance, run time, and beam distance.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP04-rated penlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Rated for use in environments where hazardous material is present. These flashlights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Flashlights with a bull’s eye beam have a bright center for long-distance illumination.

Style F can operate on either the included rechargeable batteries or standard AA alkaline batteries.

Flashlights that cannot be sold to the regions listed are restricted by local energy efficiency regulations.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP04 rated headlamps withstand liquid splashed from all angles but have not been tested against dust. IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Rated IP07, this headlamp withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It shines light on your work while keeping your hands free. This headlamp has long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. It casts a uniform beam that's especially good for close-up tasks and inspection work. Headlamps come on an adjustable elastic strap for normal wear. For secure wear over a hard hat, they also come with a rubber strap and snap-together fastener.

Headlamps with a battery life indicator let you know how close the batteries are to needing replacement. An LED light glows green when battery life is above 80%, yellow when it’s between 20% and 80%, and red when it’s below 20%.

Headlamps with a dimmable light conserve battery life.

Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.