Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

These solid EPDM rubber seals also resist salts.

Tested in accordance with UL and NFPA standards, these silicone rubber seals are for use on fire-rated doors.

Made of solid silicone foam rubber, these seals also resist water and salts.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber bulb.

The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Use these H-seals to lock out moisture, dust, and debris around windows and panels.

Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

These seals have solid construction.

These seals have solid construction.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

The flat edges on these square-profile seals provide more sealing surface than round-profile seals. They’re made of 98% silica to resist temperatures up to 2300° F.

Made from tightly woven calcium alumina silicate, these seals can handle temperatures from –300° to 1100° F.

Made of fiberglass, these seals are woven tighter than High-Temperature Ultra-Conformable Slotted Edge Seals for increased durability. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Even after extended compression, these sheets and strips will bounce back to shape.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

The magnetic insert provides a tight seal on metal doors.

Flexible pile construction helps reduce door vibration.

Also known as door sweeps, this weatherstripping closes the gap between the bottom of the door and the floor.

Avoid scuffing your floor and reduce wear on your seals—this weatherstripping has a plunger that lowers the seal as the door is closed and raises it as the door is opened.

Wrap this weatherstripping around the bottom of a door to seal gaps.

Close the gap between the bottom of an overhead door and the floor.

Sets include six pieces of weatherstripping for an overhead door—two for the top and four for the sides to seal gaps.

After installation, the seal projection can be adjusted with a screwdriver to ensure a tight fit.

These thresholds have a seal to provide protection from the elements. With a ribbed top, they offer more slip resistance than smooth-top thresholds.

An antislip coating adds another layer of slip resistance to these thresholds.

The middle of these three-piece thresholds can be installed smooth or ribbed side up for more slip resistance.

These shelters are spring loaded, allowing them to retract and flex with trailers to provide a better seal than standard dock door shelters.

Close the gap between your dock door and a trailer to keep heated or cooled air in and dust out while loading or unloading.

Create a frosted effect on windows to block the view.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

Sample multiple sizes and styles of heavy duty plastic trim.

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Press this pliable rope into place to hold glass in window frames and seal leaks.

These sealants don't degrade in sunlight.