Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

Made of solid silicone foam rubber, these seals also resist water and salts.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

In addition to oil, these seals resist grease, salts, water, steam, and most detergents.

These seals have an EPDM foam rubber bulb.

The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.

Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

These seals have solid construction.

These seals have solid construction.

Mount this weatherstripping to the sides and top of a door frame to seal gaps.

A dense seal helps control noise.

Flexible pile construction helps reduce door vibration.

Also known as door sweeps, this weatherstripping closes the gap between the bottom of the door and the floor.

Avoid scuffing your floor and reduce wear on your seals—this weatherstripping has a plunger that lowers the seal as the door is closed and raises it as the door is opened.

A drip guard diverts rain and snow away from the bottom of the door.

Close the gap between the bottom of an overhead door and the floor.

Mount this weatherstripping to the sides and top of an overhead door frame to seal gaps.

After installation, the seal projection can be adjusted with a screwdriver to ensure a tight fit.

These thresholds have a seal to provide protection from the elements. With a ribbed top, they offer more slip resistance than smooth-top thresholds.

An antislip coating adds another layer of slip resistance to these thresholds.

The middle of these three-piece thresholds can be installed smooth or ribbed side up for more slip resistance.

These shelters are spring loaded, allowing them to retract and flex with trailers to provide a better seal than standard dock door shelters.

Close the gap between your dock door and a trailer to keep heated or cooled air in and dust out while loading or unloading.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

Silicone maintains its flexibility across a wide range of temperatures.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

Even after extended compression, these sheets and strips will bounce back to shape.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Sample multiple sizes and styles of rubber trim.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Sample multiple sizes and styles of heavy duty plastic trim.

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA 1971 (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Make temporary waterproof seals that peel off when no longer needed.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Seal glass windows in metal and wood fire-rated doors.

Use this tape outdoors for sealing and mounting signs and security control panels.

Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.

An alternative to caulk and rubber sealants, this tape comes compressed and gradually expands to fill large gaps and voids.

Use this flame-retardant tape for sealing in galleys and other harsh, wet environments.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.

This synthetic felt is an economical alternative to wool felt.