For Screw Size For Screw Size |
|---|
Material Material |
|---|
|
Washer Type Washer Type |
|---|
 |  |
| Leveling for I- Beams | Wedge Lock |
ID ID |
|---|
OD OD |
|---|
Hardness Hardness |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Washers
More
Leveling Washers for I-Beams
Mounted on an I-Beam
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Black-oxide iron washers have a matte-black finish that prevents corrosion in dry environments.
Hot-dipped galvanized iron washers are corrosion resistant in wet environments.
Aluminum washers are lightweight and corrosion resistant in wet environments.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Screw Size | ID | Wd. | (A) | (B) | Hardness | Pkg. Qty. | Pkg. | |
Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 25 | 000000000 | 000000 |
| 5/16" | 0.375" | 1.000" | 0.312" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 25 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 25 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 10 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1 1/8" | 1.250" | 2.250" | 0.625" | 0.250" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.375" | 2.250" | 0.719" | 0.312" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/2" | 1.625" | 3.000" | 0.812" | 0.312" | Rockwell C35 | 1 | 000000000 | 00000 |
Black-Oxide Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 10 | 000000000 | 0000 |
| 5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 5 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 5 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Hot-Dipped Galvanized Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B72 | 25 | 000000000 | 00000 |
| 5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 10 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
| 1 1/8" | 1.188" | 2.250" | 0.625" | 0.281" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Aluminum | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Not Rated | 5 | 000000000 | 0000 |
| 5/16" | 0.375" | 1.000" | 0.250" | 0.094" | Not Rated | 5 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Not Rated | 5 | 000000000 | 00000 |
Steel | ||||||||
| 1/2" | 0.546" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 5/8" | 0.702" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 3/4" | 0.827" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 7/8" | 0.952" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 1" | 1.140" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
| 1/4" | 0.312" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
| 5/16" | 0.375" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.312" | 0.125" | Rockwell B45 | 1 | 000000000 | 0000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B45 | 1 | 000000000 | 0000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B45 | 1 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B45 | 1 | 000000000 | 00000 |
Metric Leveling Washers for I-Beams
Mounted on an I-Beam
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Zinc-plated steel washers are coated for corrosion resistance in wet environments.
Hot-dipped galvanized steel washers are ten times more corrosion resistant than zinc-plated washers.
18-8 stainless steel washers are the most corrosion-resistant option.
For technical drawings and 3-D models, click on a part number.
Thick., mm | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | ID, mm | Wd., mm | (A) | (B) | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 00000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
Hot-Dipped Galvanized Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
Wedge Lock Washers
These two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting. Washers are reusable.
316 stainless steel washers have excellent resistance to chemicals and salt water. They may be mildly magnetic.
Zinc-flake-coated steel washers are corrosion resistant in wet environments.
316 stainless steel and zinc-flake-coated steel washers are comparable to NORD-LOCK® Series washers.
Black zinc-flake-coated steel washers are comparable to Sherex TEC Series washers.
For technical drawings and 3-D models, click on a part number.
Inch
| For Screw Size | ID | OD | Thick. | Hardness | Heat Treatment | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 0.280" | 0.450" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| 1/4" | 0.280" | 0.530" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.650" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.830" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 1/2" | 0.530" | 0.770" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 1/2" | 0.530" | 1.000" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 3/4" | 0.790" | 1.210" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 3/4" | 0.790" | 1.540" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1" | 1.100" | 1.540" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1" | 1.100" | 1.910" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
Zinc-Flake-Coated Steel | ||||||||
| 1/4" | 0.280" | 0.450" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 1/4" | 0.280" | 0.530" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.650" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.830" | 0.090"-0.110" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| 1/2" | 0.530" | 0.770" | 0.090"-0.110" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| 1/2" | 0.530" | 1.000" | 0.120"-0.140" | Rockwell C46 | __ | 8 | 000000000 | 00000 |
| 3/4" | 0.790" | 1.210" | 0.120"-0.140" | Rockwell C46 | __ | 4 | 000000000 | 0000 |
| 3/4" | 0.790" | 1.540" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| 1" | 1.100" | 1.540" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| 1" | 1.100" | 1.910" | 0.170"-0.190" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
Black Zinc-Flake-Coated Steel | ||||||||
| 1/4" | 0.280" | 0.450" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| 1/4" | 0.280" | 0.530" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.650" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| 3/8" | 0.410" | 0.830" | 0.090"-0.110" | Rockwell C48 | __ | 5 | 000000000 | 00000 |
| 1/2" | 0.530" | 0.770" | 0.090"-0.110" | Rockwell C48 | __ | 5 | 000000000 | 0000 |
| 1/2" | 0.530" | 1.000" | 0.120"-0.140" | Rockwell C48 | __ | 4 | 000000000 | 00000 |
| 3/4" | 0.790" | 1.210" | 0.120"-0.140" | Rockwell C48 | __ | 4 | 000000000 | 00000 |
| 3/4" | 0.790" | 1.540" | 0.120"-0.140" | Rockwell C48 | __ | 2 | 000000000 | 0000 |
| 1" | 1.100" | 1.540" | 0.120"-0.140" | Rockwell C48 | __ | 2 | 000000000 | 0000 |
Metric
| For Screw Size | ID | OD | Thick. | Hardness | Heat Treatment | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| M6 | 0.260" | 0.430" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M6 | 0.260" | 0.530" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M10 | 0.420" | 0.650" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M10 | 0.420" | 0.830" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M12 | 0.510" | 0.770" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M12 | 0.510" | 1.000" | 0.110"-0.130" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M18 | 0.770" | 1.140" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M18 | 0.770" | 1.360" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M20 | 0.840" | 1.210" | 0.110"-0.130" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| M20 | 0.840" | 1.540" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M24 | 1.000" | 1.540" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M24 | 1.000" | 1.910" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M27 | 1.120" | 1.650" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| M42 | 1.700" | 2.480" | 0.460"-0.480" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
Black-Oxide 316 Stainless Steel | ||||||||
| M8 | 0.340" | 0.650" | 0.070"-0.090" | Rockwell C40 | Case Hardened | 1 | 000000000 | 0000 |
| M16 | 0.670" | 1.210" | 0.110"-0.130" | Rockwell C40 | Case Hardened | 1 | 000000000 | 00000 |
Zinc-Flake-Coated Steel | ||||||||
| M6 | 0.260" | 0.430" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| M6 | 0.260" | 0.530" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| M10 | 0.420" | 0.650" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| M10 | 0.420" | 0.830" | 0.090"-0.110" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| M12 | 0.510" | 0.770" | 0.090"-0.110" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| M12 | 0.510" | 1.000" | 0.120"-0.140" | Rockwell C46 | __ | 8 | 000000000 | 00000 |
| M18 | 0.770" | 1.140" | 0.120"-0.140" | Rockwell C46 | __ | 4 | 000000000 | 0000 |
| M18 | 0.770" | 1.360" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| M20 | 0.840" | 1.210" | 0.120"-0.140" | Rockwell C46 | __ | 4 | 000000000 | 0000 |
| M20 | 0.840" | 1.540" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| M24 | 1.000" | 1.540" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| M24 | 1.000" | 1.910" | 0.170"-0.190" | Rockwell C46 | __ | 2 | 000000000 | 00000 |
| M27 | 1.120" | 1.650" | 0.220"-0.240" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| M27 | 1.120" | 1.910" | 0.220"-0.240" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| M42 | 1.700" | 2.480" | 0.250"-0.270" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
Black Zinc-Flake-Coated Steel | ||||||||
| M6 | 0.260" | 0.430" | 0.060"-0.080" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| M6 | 0.260" | 0.530" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| M8 | 0.340" | 0.650" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| M10 | 0.420" | 0.650" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| M10 | 0.420" | 0.830" | 0.090"-0.110" | Rockwell C48 | __ | 5 | 000000000 | 00000 |
| M12 | 0.510" | 0.770" | 0.090"-0.110" | Rockwell C48 | __ | 5 | 000000000 | 0000 |
| M12 | 0.510" | 1.000" | 0.120"-0.140" | Rockwell C48 | __ | 4 | 000000000 | 00000 |
| M16 | 0.670" | 1.210" | 0.120"-0.140" | Rockwell C48 | __ | 4 | 000000000 | 00000 |
Inch and Metric
| For Screw Size | ID | OD | Thick. | Hardness | Heat Treatment | Pkg. Qty. | Pkg. | |
316 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. 5, M3 | 0.130" | 0.280" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| No. 6, M3.5 | 0.150" | 0.300" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| No. 6, M3.5 | 0.150" | 0.350" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| No. 8, M4 | 0.170" | 0.300" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 0000 |
| No. 8, M4 | 0.170" | 0.350" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 0000 |
| No. 10, M5 | 0.210" | 0.350" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 0000 |
| No. 10, M5 | 0.210" | 0.430" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 5 | 000000000 | 0000 |
| 5/16", M8 | 0.340" | 0.530" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| 5/16", M8 | 0.340" | 0.650" | 0.070"-0.090" | Rockwell C51 | Case Hardened | 5 | 000000000 | 00000 |
| 7/16", M11 | 0.450" | 0.730" | 0.080"-0.100" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 9/16", M14 | 0.600" | 0.910" | 0.110"-0.130" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 9/16", M14 | 0.600" | 1.210" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 5/8", M16 | 0.670" | 1.000" | 0.110"-0.130" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 5/8", M16 | 0.670" | 1.210" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 0000 |
| 7/8", M22 | 0.920" | 1.360" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 7/8", M22 | 0.920" | 1.650" | 0.120"-0.140" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1 1/8", M30 | 1.240" | 1.850" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1 1/8", M30 | 1.240" | 2.300" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1 1/4", M33 | 1.350" | 1.910" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1 3/8", M36 | 1.470" | 2.170" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 1 1/2", M39 | 1.590" | 2.300" | 0.260"-0.280" | Rockwell C51 | Case Hardened | 1 | 000000000 | 00000 |
| 3", M76 | 3.110" | 4.330" | 0.340"-0.360" | Rockwell C51 | Case Hardened | 1 | 000000000 | 000000 |
Zinc-Flake-Coated Steel | ||||||||
| No. 5, M3 | 0.130" | 0.280" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 6, M3.5 | 0.150" | 0.300" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 6, M3.5 | 0.150" | 0.350" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 8, M4 | 0.170" | 0.300" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 8, M4 | 0.170" | 0.350" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 10, M5 | 0.210" | 0.350" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| No. 10, M5 | 0.210" | 0.430" | 0.060"-0.080" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 5/16", M8 | 0.340" | 0.530" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 5/16", M8 | 0.340" | 0.650" | 0.090"-0.110" | Rockwell C46 | __ | 20 | 000000000 | 00000 |
| 7/16", M11 | 0.450" | 0.730" | 0.090"-0.110" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| 9/16", M14 | 0.600" | 0.910" | 0.120"-0.140" | Rockwell C46 | __ | 10 | 000000000 | 00000 |
| 9/16", M14 | 0.600" | 1.210" | 0.120"-0.140" | Rockwell C46 | __ | 4 | 000000000 | 0000 |
| 5/8", M16 | 0.670" | 1.000" | 0.120"-0.140" | Rockwell C46 | __ | 8 | 000000000 | 00000 |
| 5/8", M16 | 0.670" | 1.210" | 0.120"-0.140" | Rockwell C46 | __ | 4 | 000000000 | 0000 |
| 7/8", M22 | 0.920" | 1.360" | 0.120"-0.140" | Rockwell C46 | __ | 2 | 000000000 | 0000 |
| 7/8", M22 | 0.920" | 1.650" | 0.170"-0.190" | Rockwell C46 | __ | 2 | 000000000 | 00000 |
| 1 1/8", M30 | 1.240" | 1.850" | 0.220"-0.240" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| 1 1/8", M30 | 1.240" | 2.300" | 0.250"-0.270" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| 1 1/4", M33 | 1.350" | 1.910" | 0.220"-0.240" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| 1 3/8", M36 | 1.470" | 2.170" | 0.250"-0.270" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| 1 1/2", M39 | 1.590" | 2.300" | 0.250"-0.270" | Rockwell C46 | __ | 1 | 000000000 | 0000 |
| 1 3/4", M45 | 1.820" | 2.760" | 0.270"-0.290" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
| 1 7/8", M45 | 1.950" | 2.950" | 0.270"-0.290" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
| 2", M52 | 2.110" | 3.150" | 0.270"-0.290" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
| 2 1/4", M56 | 2.330" | 3.350" | 0.270"-0.290" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
| 2 1/2", M64 | 2.640" | 3.740" | 0.270"-0.290" | Rockwell C46 | __ | 1 | 000000000 | 00000 |
Black Zinc-Flake-Coated Steel | ||||||||
| 5/16", M8 | 0.340" | 0.530" | 0.090"-0.110" | Rockwell C48 | __ | 10 | 000000000 | 00000 |
| 5/8", M16 | 0.670" | 1.000" | 0.120"-0.140" | Rockwell C48 | __ | 4 | 000000000 | 00000 |