Body Type Body Type |
---|
![]() | Weldable |
Pin Type Pin Type |
---|
![]() | Weld On |
System of Measurement System of Measurement |
---|
|
Handle Type Handle Type |
---|
![]() | ![]() |
T-Handle | L-Handle |
![]() | ![]() |
Ball | Add a Knob |
Body Material Body Material |
---|
|
Nose Material Nose Material |
---|
|
Handle Locking Type Handle Locking Type |
---|
|
Material Material |
---|
|
Nose Type Nose Type |
---|
![]() | Long |
Head Type Head Type |
---|
![]() | Flat |
Handle Material Handle Material |
---|
|
Locking Type Locking Type |
---|
![]() | Without Thread Locker |
Maximum Temperature Maximum Temperature |
---|
|
Body Finish Body Finish |
---|
|
Pass these pins through a mounting hole and spot weld the head to the surface for greater rigidity and strength than other pins.
Steel pins have good strength.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
For technical drawings and 3-D models, click on a part number.
Base | ||||||
---|---|---|---|---|---|---|
Lg. | Dia. Tolerance | Dia. | Thick. | Pkg. Qty. | Pkg. | |
1004-1045 Carbon Steel | ||||||
5/32" Dia. | ||||||
1/2" | 0.0028" to 0.0068" | 7/16" | 1/16" | 10 | 000000000 | 00000 |
3/16" Dia. | ||||||
3/4" | -0.0025" to 0.0025" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1" | -0.0025" to 0.0025" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||
3/4" | -0.006" to 0" | 5/8" | 5/64" | 10 | 000000000 | 0000 |
1" | -0.006" to 0" | 5/8" | 5/64" | 10 | 000000000 | 0000 |
1 1/4" | -0.006" to 0" | 5/8" | 5/64" | 10 | 000000000 | 0000 |
2" | -0.006" to 0" | 5/8" | 5/64" | 10 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||
5/32" Dia. | ||||||
1/2" | 0.0028" to 0.0068" | 7/16" | 1/16" | 10 | 000000000 | 0000 |
3/16" Dia. | ||||||
3/4" | -0.0025" to 0.0025" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1" | -0.0025" to 0.0025" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||
3/4" | -0.006" to 0" | 5/8" | 5/64" | 5 | 000000000 | 0000 |
1" | -0.006" to 0" | 5/8" | 5/64" | 5 | 000000000 | 0000 |
1 1/4" | -0.006" to 0" | 5/8" | 5/64" | 5 | 000000000 | 0000 |
2" | -0.006" to 0" | 5/8" | 5/64" | 5 | 000000000 | 00000 |
Spot weld these pins directly to a surface for greater rigidity and strength than other pins—no mounting hole required.
Steel pins have good strength.
18-8 stainless steel pins offer a balance of strength and corrosion resistance. They may be mildly magnetic. Pins are passivated for added protection against corrosion and oxidation.
For technical drawings and 3-D models, click on a part number.
Base | ||||||
---|---|---|---|---|---|---|
Lg. | Dia. Tolerance | Dia. | Thick. | Pkg. Qty. | Pkg. | |
1004-1045 Carbon Steel | ||||||
1/8" Dia. | ||||||
1/2" | -0.011" to -0.008" | 1/4" | 3/64" | 10 | 000000000 | 00000 |
3/16" Dia. | ||||||
1/2" | -0.0025" to 0.0025" | 7/16" | 1/16" | 10 | 000000000 | 0000 |
5/8" | -0.0025" to 0.0025" | 7/16" | 1/16" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||
5/16" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1/2" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
3/4" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
18-8 Stainless Steel | ||||||
1/8" Dia. | ||||||
1/2" | -0.011" to -0.006" | 1/4" | 3/64" | 10 | 000000000 | 0000 |
3/16" Dia. | ||||||
1/2" | -0.0025" to 0.0025" | 7/16" | 1/16" | 10 | 000000000 | 0000 |
5/8" | -0.0025" to 0.0025" | 7/16" | 1/16" | 10 | 000000000 | 0000 |
1/4" Dia. | ||||||
5/16" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 0000 |
1/2" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 00000 |
3/4" | -0.006" to 0" | 1/2" | 5/64" | 10 | 000000000 | 00000 |
1" | -0.006" to 0" | 1/2" | 5/64" | 5 | 000000000 | 0000 |
A T-handle makes these spring plungers easy to grip. Weld them in place for a strong permanent hold. They have a long nose that provides a large bearing surface to handle side loads; pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Spring Plungers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Handle | Replacement Barrel Sleeves | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Lg. | Material | Temperature Range, ° F | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | ||||||||||
1" | 1.5" | 0.25" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 000000 | 000000000 | 00000 |
1" | 1.5" | 0.375" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.375" | 0.625" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.625" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.688" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.625" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 3" | 0.5" | 0.625" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000 | 00 |
1" | 4.5" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.625" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
A quarter turn of the handle locks these plungers in the retracted position. Weld them in place for a strong permanent hold. The T-handle is easy to grip, and the long nose provides a large bearing surface to handle side loads. Pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Spring Plungers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Handle | Replacement Barrel Sleeves | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Lg. | Material | Temperature Range, ° F | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | ||||||||||
1" | 1.5" | 0.25" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 000000 | 000000000 | 00000 |
1" | 1.5" | 0.375" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.685" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.625" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.5" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.625" | 0.563" | 2.25" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
A smooth ball handle is easy to grip and won't catch on other parts. Weld these spring plungers in place for a strong permanent hold. They have a long nose that provides a large bearing surface to handle side loads; pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Spring Plungers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Handle | Replacement Barrel Sleeves | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Lg. | Material | Temperature Range, ° F | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | ||||||||||
1" | 1.5" | 0.25" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 000000 | 000000000 | 00000 |
1" | 1.5" | 0.375" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.375" | 0.625" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.625" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.688" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.625" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 3" | 0.375" | 0.625" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000 | 00 |
1" | 4.5" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
A quarter turn of the handle locks these plungers in the retracted position. Weld them in place for a strong permanent hold. The smooth ball handle is easy to grip and won't catch on other parts, and the long nose that provides a large bearing surface to handle side loads. Pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Spring Plungers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Handle | Replacement Barrel Sleeves | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Lg. | Material | Temperature Range, ° F | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | ||||||||||
1" | 1.5" | 0.25" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 000000 | 000000000 | 00000 |
1" | 1.5" | 0.375" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 1.5" | 0.5" | 0.688" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.625" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.5" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.625" | 0.563" | 1.375" | Plastic | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
An L-handle takes up less space than other handles. Weld these spring plungers in place for a strong permanent hold. They have a long nose that provides a large bearing surface to handle side loads; pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Spring Plungers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Nose Force, lbs. | Handle | Weld-Mount Catches | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Extended | Compressed | Lg. | Material | Each | Each | ||
Steel Body and Steel Nose | |||||||||||
0.25" | 0.875" | 0.16" | 0.38" | 0.5 | 2.5 | 0.68" | Steel | 0000000 | 000000 | 0000000 | 00000 |
0.375" | 1.47" | 0.24" | 0.56" | 0.8 | 3.8 | 0.98" | Steel | 0000000 | 00000 | 0000000 | 0000 |
0.5" | 1.42" | 0.32" | 0.75" | 1 | 5 | 1.35" | Steel | 0000000 | 00000 | 0000000 | 00000 |
0.625" | 2.11" | 0.38" | 1" | 1 | 5 | 1.35" | Steel | 0000000 | 00000 | 0000000 | 0000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | |||||||||||
0.25" | 0.875" | 0.16" | 0.38" | 0.5 | 2.5 | 0.68" | 18-8 Stainless Steel | 0000000 | 00000 | 0000000 | 0000 |
0.375" | 1.47" | 0.24" | 0.56" | 3.8 | 3.8 | 0.98" | 18-8 Stainless Steel | 0000000 | 00000 | 0000000 | 0000 |
0.5" | 1.42" | 0.32" | 0.75" | 1 | 5 | 1.35" | 18-8 Stainless Steel | 0000000 | 00000 | 0000000 | 00000 |
0.625" | 2.11" | 0.38" | 1" | 1 | 5 | 1.35" | 18-8 Stainless Steel | 0000000 | 00000 | 0000000 | 00000 |
Add a knob or handle to the threaded shank. Weld these spring plungers in place for a strong permanent hold. They have a long nose that provides a large bearing surface to handle side loads; pull the handle to retract the nose.
Steel is strong and wear resistant.
18-8 stainless steel is chemical resistant and may be mildly magnetic.
Spring Plungers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Body | Nose | Knob End | Replacement Barrel Sleeves | |||||||
Wd. | Lg. | Dia. | Extended Lg. | Thread Size | Thread Length | Temperature Range, ° F | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
1" | 2.25" | 0.5" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 0000 |
18-8 Stainless Steel Body and 18-8 Stainless Steel Nose | ||||||||||
1" | 1.5" | 0.375" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 1.5" | 0.5" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |
1" | 2.25" | 0.5" | 0.563" | 3/8"-16 | 1/2" | 0° to 165° | 000000000 | 00000 | 000000000 | 00000 |