Filter by
Material
Overall Thickness
Opening Width
Opening Length
Rail Type
Strand Thickness
Panel Construction
DFARS Specialty Metals
Strand Width
Telescoping Weld-Together Rails
Create posts of varying lengths. To telescope rails, slide one length of rail into the next larger size rail (for example, a 1 3/4" height rail fits into a 2" height rail and a 3/4" dia. rail fits into a 1" dia. rail). Weld the rails together at the desired length to create strong structures. These rails are not compatible with weld-together framing and fittings.
Carbon steel rails are lightly oiled.
Galvanized carbon steel rails have good corrosion resistance in wet environments and can be used outdoors.
Aluminum rails are about half the weight of steel and resist corrosion in wet environments.
304 stainless steel rails are more corrosion resistant than galvanized carbon steel. They also have good chemical resistance.
Square
Two Square Rails Shown Telescoping (Sold Separately)
Square
Rail | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Wall Thick. | Lg. Tolerance | 2 ft. | 4 ft. | 6 ft. | 8 ft. | 12 ft. | |
Carbon Steel | |||||||||
| 3/4" | 3/4" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1" | 1" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2" | 2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
Galvanized Carbon Steel | |||||||||
| 1 3/4" | 1 3/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2" | 2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
6000 Series Aluminum | |||||||||
| 3/4" | 3/4" | 0.08" | -2" to +2" | 0000000 | |||||
| 1" | 1" | 0.08" | -2" to +2" | 0000000 | |||||
| 1 1/2" | 1 1/2" | 0.11" | 0" to +0.065" | 00000000 | |||||
| 1 3/4" | 1 3/4" | 0.11" | 0" to +0.065" | 00000000 | |||||
| 2" | 2" | 0.11" | 0" to +0.065" | 00000000 | |||||
| 3 1/2" | 3 1/2" | 0.25" | 0" to +0.065" | 00000000 | |||||
| 4" | 4" | 0.25" | 0" to +0.065" | 00000000 | |||||
304 Stainless Steel | |||||||||
| 3/4" | 3/4" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1" | 1" | 0.08" | 0" to +0.125" | 0000000 | |||||
Round
Two Round Rails Shown Telescoping (Sold Separately)
Round
| Rail Dia. | Wall Thick. | Lg. Tolerance | 2 ft. | 4 ft. | 6 ft. | 8 ft. | |
Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
| 3/4" | 0.08" | 0" to +0.125" | 0000000 | ||||
| 1" | 0.08" | 0" to +0.125" | 0000000 | ||||
6000 Series Aluminum | |||||||
| 3/4" | 0.08" | -2" to +2" | 0000000 | ||||
| 1" | 0.08" | -2" to +2" | 0000000 | ||||
| 1 1/2" | 0.11" | 0" to +0.065" | 00000000 | ||||
| 1 3/4" | 0.11" | 0" to +0.065" | 00000000 | ||||
| 2" | 0.11" | 0" to +0.065" | 00000000 | ||||
304 Stainless Steel  | |||||||
| 3/4" | 0.08" | 0" to +0.125" | 0000000 | ||||
| 1" | 0.08" | 0" to +0.125" | 0000000 | ||||
Weld-Together Framing and Fittings
Create strong structures by welding this framing together. Add metal panels to close off openings. Slide the rail into the fitting and weld in place.
Tee Connectors
Cross Connectors
Cross
Five-Way Cross
For Outside Rail | Outside | Inside | Lg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weld-Together Framing Component Shape | Ht. | Wd. | Ht. | Wd. | Ht. | Wd. | Wall Thick. | (A) | (B) | (C) | Yield Strength, psi | Material | Each | |
| Cross | 1 1/2" | 1 1/2" | 1 13/16" | 1 13/16" | 1 9/16" | 1 9/16" | 0.121" | 8 3/16" | 8 3/16" | __ | 80,000 | Carbon Steel | 0000000 | 0000000 |
| Cross | 2" | 2" | 2 5/16" | 2 5/16" | 2 1/16" | 2 1/16" | 0.121" | 9 11/16" | 9 11/16" | __ | 80,000 | Carbon Steel | 0000000 | 000000 |
| Five-Way Cross | 1 1/2" | 1 1/2" | 1 13/16" | 1 13/16" | 1 9/16" | 1 9/16" | 0.121" | 8 3/16" | 8 3/16" | 3 3/16" | 80,000 | Carbon Steel | 0000000 | 000000 |
| Five-Way Cross | 2" | 2" | 2 5/16" | 2 5/16" | 2 1/16" | 2 1/16" | 0.121" | 9 11/16" | 9 11/16" | 3 11/16" | 80,000 | Carbon Steel | 0000000 | 000000 |
Metal Panels
Close off openings in structures while allowing air to pass through.
For technical drawings and 3-D models, click on a part number.
Expanded Panels—Raised
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Raised panels have strands that overlap to provide a skid-resistant surface. Use them to create safety guards for equipment and machinery.
Steel is lightly oiled.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
Carbon Steel | ||||||
| 0.146" | 0.72" | 0.16" | 0.072" | 0.036" | 00000000 | 000000 |
| 0.151" | 0.72" | 0.15" | 0.072" | 0.048" | 00000000 | 00000 |
| 0.18" | 0.94" | 0.38" | 0.088" | 0.048" | 00000000 | 00000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 00000000 | 00000 |
| 0.183" | 2.06" | 0.87" | 0.087" | 0.06" | 00000000 | 00000 |
| 0.208" | 1.75" | 0.78" | 0.101" | 0.06" | 00000000 | 00000 |
| 0.212" | 0.94" | 0.34" | 0.096" | 0.09" | 00000000 | 00000 |
| 0.212" | 1.69" | 0.76" | 0.096" | 0.09" | 00000000 | 00000 |
| 0.221" | 2.63" | 1.18" | 0.108" | 0.06" | 00000000 | 00000 |
| 0.228" | 2.5" | 1.16" | 0.105" | 0.09" | 00000000 | 00000 |
| 0.3" | 1.63" | 0.72" | 0.144" | 0.092" | 00000000 | 00000 |
| 0.318" | 2.38" | 1.09" | 0.144" | 0.134" | 00000000 | 00000 |
| 0.327" | 3.38" | 1.6" | 0.149" | 0.134" | 00000000 | 00000 |
| 0.329" | 1.56" | 0.68" | 0.15" | 0.134" | 00000000 | 00000 |
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 00000000 | 00000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 00000000 | 00000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 00000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 00000000 | 00000 |
304 Stainless Steel | ||||||
| 0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 00000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 00000 |
| 0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 00000 |
| 0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 00000 |
| 0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 00000 |
| 0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 00000 |
24" × 24" | ||||||
Carbon Steel | ||||||
| 0.146" | 0.72" | 0.16" | 0.072" | 0.036" | 00000000 | 00000 |
| 0.151" | 0.72" | 0.15" | 0.072" | 0.048" | 00000000 | 00000 |
| 0.18" | 0.94" | 0.38" | 0.088" | 0.048" | 00000000 | 00000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 00000000 | 00000 |
| 0.183" | 2.06" | 0.87" | 0.087" | 0.06" | 00000000 | 00000 |
| 0.208" | 1.75" | 0.78" | 0.101" | 0.06" | 00000000 | 00000 |
| 0.212" | 0.94" | 0.34" | 0.096" | 0.09" | 00000000 | 00000 |
| 0.212" | 1.69" | 0.76" | 0.096" | 0.09" | 00000000 | 00000 |
| 0.221" | 2.63" | 1.18" | 0.108" | 0.06" | 00000000 | 00000 |
| 0.228" | 2.5" | 1.16" | 0.105" | 0.09" | 00000000 | 00000 |
| 0.3" | 1.63" | 0.72" | 0.144" | 0.092" | 00000000 | 00000 |
| 0.318" | 2.38" | 1.09" | 0.144" | 0.134" | 00000000 | 00000 |
| 0.327" | 3.38" | 1.6" | 0.149" | 0.134" | 00000000 | 00000 |
| 0.329" | 1.56" | 0.68" | 0.15" | 0.134" | 00000000 | 00000 |
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 00000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 00000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 00000 |
304 Stainless Steel | ||||||
| 0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 00000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 00000 |
| 0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 00000 |
| 0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 00000 |
| 0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 00000 |
| 0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 00000 |
48" × 48" | ||||||
Carbon Steel | ||||||
| 0.146" | 0.72" | 0.16" | 0.072" | 0.036" | 0000000 | 00000 |
| 0.151" | 0.72" | 0.15" | 0.072" | 0.048" | 0000000 | 000000 |
| 0.18" | 0.94" | 0.38" | 0.088" | 0.048" | 0000000 | 00000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 00000 |
| 0.183" | 2.06" | 0.87" | 0.087" | 0.06" | 0000000 | 00000 |
| 0.208" | 1.75" | 0.78" | 0.101" | 0.06" | 0000000 | 00000 |
| 0.212" | 0.94" | 0.34" | 0.096" | 0.09" | 0000000 | 00000 |
| 0.212" | 1.69" | 0.76" | 0.096" | 0.09" | 0000000 | 00000 |
| 0.221" | 2.63" | 1.18" | 0.108" | 0.06" | 0000000 | 00000 |
| 0.228" | 2.5" | 1.16" | 0.105" | 0.09" | 0000000 | 00000 |
| 0.3" | 1.63" | 0.72" | 0.144" | 0.092" | 0000000 | 00000 |
| 0.318" | 2.38" | 1.09" | 0.144" | 0.134" | 0000000 | 00000 |
| 0.327" | 3.38" | 1.6" | 0.149" | 0.134" | 0000000 | 00000 |
| 0.329" | 1.56" | 0.68" | 0.15" | 0.134" | 0000000 | 00000 |
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 00000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 000000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 00000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 000000 |
304 Stainless Steel | ||||||
| 0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 000000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 000000 |
| 0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 000000 |
| 0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 000000 |
| 0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 000000 |
| 0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 000000 |
48" × 96" | ||||||
Carbon Steel | ||||||
| 0.146" | 0.72" | 0.16" | 0.072" | 0.036" | 0000000 | 000000 |
| 0.151" | 0.72" | 0.15" | 0.072" | 0.048" | 0000000 | 000000 |
| 0.18" | 0.94" | 0.38" | 0.088" | 0.048" | 0000000 | 000000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 000000 |
| 0.183" | 2.06" | 0.87" | 0.087" | 0.06" | 0000000 | 000000 |
| 0.208" | 1.75" | 0.78" | 0.101" | 0.06" | 0000000 | 000000 |
| 0.212" | 0.94" | 0.34" | 0.096" | 0.09" | 0000000 | 000000 |
| 0.212" | 1.69" | 0.76" | 0.096" | 0.09" | 0000000 | 000000 |
| 0.221" | 2.63" | 1.18" | 0.108" | 0.06" | 0000000 | 000000 |
| 0.228" | 2.5" | 1.16" | 0.105" | 0.09" | 0000000 | 000000 |
| 0.288" | 2.5" | 1.13" | 0.138" | 0.09" | 0000000 | 000000 |
| 0.3" | 1.63" | 0.72" | 0.144" | 0.092" | 0000000 | 000000 |
| 0.318" | 2.38" | 1.09" | 0.144" | 0.134" | 0000000 | 000000 |
| 0.327" | 3.38" | 1.6" | 0.149" | 0.134" | 0000000 | 000000 |
| 0.329" | 1.56" | 0.68" | 0.15" | 0.134" | 0000000 | 000000 |
3003 Aluminum | ||||||
| 0.19" | 0.94" | 0.38" | 0.093" | 0.05" | 0000000 | 000000 |
| 0.208" | 0.94" | 0.35" | 0.096" | 0.08" | 0000000 | 000000 |
| 0.219" | 1.75" | 0.79" | 0.109" | 0.05" | 0000000 | 000000 |
| 0.369" | 1.68" | 0.67" | 0.169" | 0.125" | 0000000 | 000000 |
304 Stainless Steel | ||||||
| 0.178" | 0.94" | 0.38" | 0.087" | 0.048" | 0000000 | 000000 |
| 0.183" | 0.94" | 0.37" | 0.087" | 0.06" | 0000000 | 000000 |
| 0.217" | 1.76" | 0.78" | 0.106" | 0.06" | 0000000 | 000000 |
| 0.232" | 1.69" | 0.75" | 0.107" | 0.09" | 0000000 | 000000 |
| 0.234" | 2.75" | 1.18" | 0.115" | 0.06" | 0000000 | 000000 |
| 0.246" | 2.63" | 1.15" | 0.115" | 0.09" | 0000000 | 000000 |
Expanded Panels—Flattened
Expanded panels are more rigid than perforated panels and are for use when structural stability is important. They can be formed and welded; however, they are more difficult to cut than perforated panels. Flattened panels begin as raised panels, then they're rolled to a smooth and flat finish. Use them to create protective enclosures, shelving, grilles, and baskets.
Steel is lightly oiled.
Galvanized steel has good corrosion resistance in wet environments and can be used outdoors.
1100 aluminum is about half the weight of steel and resists corrosion in wet environments.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
304 stainless steel is more corrosion resistant than galvanized steel. It also has good chemical resistance.
316 stainless steel has excellent resistance to chemicals and salt water.
Opening | Strand | |||||
|---|---|---|---|---|---|---|
| Overall Thick. | Wd. | Lg. | Wd. | Thick. | Each | |
12" × 12" | ||||||
Carbon Steel | ||||||
| 0.029" | 0.72" | 0.09" | 0.079" | 0.029" | 00000000 | 000000 |
| 0.038" | 0.72" | 0.09" | 0.08" | 0.038" | 00000000 | 00000 |
| 0.038" | 1" | 0.31" | 0.097" | 0.038" | 00000000 | 00000 |
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 00000000 | 00000 |
| 0.048" | 1.75" | 0.7" | 0.111" | 0.048" | 00000000 | 00000 |
| 0.048" | 2.25" | 0.8" | 0.098" | 0.048" | 00000000 | 00000 |
| 0.048" | 2.75" | 1.09" | 0.119" | 0.048" | 00000000 | 00000 |
| 0.06" | 1.76" | 0.71" | 0.105" | 0.06" | 00000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 00000000 | 00000 |
| 0.072" | 1.78" | 0.71" | 0.106" | 0.072" | 00000000 | 00000 |
| 0.072" | 2.75" | 1.1" | 0.116" | 0.072" | 00000000 | 00000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 00000000 | 00000 |
| 0.108" | 2.56" | 1.01" | 0.158" | 0.108" | 00000000 | 00000 |
Galvanized Carbon Steel | ||||||
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 00000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 00000 |
1100 Aluminum | ||||||
| 0.029" | 0.76" | 0.19" | 0.078" | 0.029" | 00000000 | 00000 |
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 00000000 | 00000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 00000000 | 00000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 00000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 00000000 | 00000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 00000000 | 00000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 00000000 | 00000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 00000000 | 00000 |
304 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 00000 |
| 0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
| 0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 00000 |
| 0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 00000 |
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
24" × 24" | ||||||
Carbon Steel | ||||||
| 0.029" | 0.72" | 0.09" | 0.079" | 0.029" | 0000000 | 00000 |
| 0.038" | 0.72" | 0.09" | 0.08" | 0.038" | 0000000 | 00000 |
| 0.038" | 1" | 0.31" | 0.097" | 0.038" | 0000000 | 00000 |
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.048" | 1.75" | 0.7" | 0.111" | 0.048" | 0000000 | 00000 |
| 0.048" | 2.25" | 0.8" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.048" | 2.75" | 1.09" | 0.119" | 0.048" | 0000000 | 00000 |
| 0.06" | 1.76" | 0.71" | 0.105" | 0.06" | 0000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 00000 |
| 0.072" | 1.78" | 0.71" | 0.106" | 0.072" | 0000000 | 00000 |
| 0.072" | 2.75" | 1.1" | 0.116" | 0.072" | 0000000 | 00000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 00000 |
| 0.108" | 2.56" | 1.01" | 0.158" | 0.108" | 0000000 | 00000 |
Galvanized Carbon Steel | ||||||
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 00000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 00000 |
1100 Aluminum | ||||||
| 0.029" | 0.76" | 0.19" | 0.078" | 0.029" | 0000000 | 00000 |
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 00000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 00000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 00000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 00000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 00000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 00000 |
304 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 00000 |
| 0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
| 0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 00000 |
| 0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 00000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 00000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 00000 |
48" × 48" | ||||||
Carbon Steel | ||||||
| 0.029" | 0.72" | 0.09" | 0.079" | 0.029" | 0000000 | 000000 |
| 0.038" | 0.72" | 0.09" | 0.08" | 0.038" | 0000000 | 000000 |
| 0.038" | 1" | 0.31" | 0.097" | 0.038" | 0000000 | 00000 |
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.048" | 1.75" | 0.7" | 0.111" | 0.048" | 0000000 | 00000 |
| 0.048" | 2.25" | 0.8" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.048" | 2.75" | 1.09" | 0.119" | 0.048" | 0000000 | 00000 |
| 0.06" | 1.76" | 0.71" | 0.105" | 0.06" | 0000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 000000 |
| 0.072" | 1.78" | 0.71" | 0.106" | 0.072" | 0000000 | 00000 |
| 0.072" | 2.75" | 1.1" | 0.116" | 0.072" | 0000000 | 00000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 000000 |
| 0.108" | 2.56" | 1.01" | 0.158" | 0.108" | 0000000 | 00000 |
Galvanized Carbon Steel | ||||||
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 00000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 000000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 000000 |
1100 Aluminum | ||||||
| 0.029" | 0.76" | 0.19" | 0.078" | 0.029" | 0000000 | 000000 |
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 000000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 000000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 00000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 000000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 000000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 000000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 000000 |
304 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 000000 |
| 0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
| 0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 000000 |
| 0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
48" × 96" | ||||||
Carbon Steel | ||||||
| 0.029" | 0.72" | 0.09" | 0.079" | 0.029" | 0000000 | 000000 |
| 0.038" | 0.72" | 0.09" | 0.08" | 0.038" | 0000000 | 000000 |
| 0.038" | 1" | 0.31" | 0.097" | 0.038" | 0000000 | 000000 |
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 000000 |
| 0.048" | 1.75" | 0.7" | 0.111" | 0.048" | 0000000 | 000000 |
| 0.048" | 2.25" | 0.8" | 0.098" | 0.048" | 0000000 | 000000 |
| 0.048" | 2.75" | 1.09" | 0.119" | 0.048" | 0000000 | 000000 |
| 0.06" | 1.76" | 0.71" | 0.105" | 0.06" | 0000000 | 000000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 000000 |
| 0.072" | 1.78" | 0.71" | 0.106" | 0.072" | 0000000 | 000000 |
| 0.072" | 2.75" | 1.1" | 0.116" | 0.072" | 0000000 | 000000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 000000 |
| 0.108" | 2.56" | 1.01" | 0.158" | 0.108" | 0000000 | 000000 |
Galvanized Carbon Steel | ||||||
| 0.048" | 1" | 0.3" | 0.098" | 0.048" | 0000000 | 000000 |
| 0.072" | 1" | 0.29" | 0.107" | 0.072" | 0000000 | 000000 |
| 0.108" | 1.69" | 0.59" | 0.165" | 0.108" | 0000000 | 000000 |
1100 Aluminum | ||||||
| 0.029" | 0.76" | 0.19" | 0.078" | 0.029" | 0000000 | 000000 |
3003 Aluminum | ||||||
| 0.029" | 0.31" | 0.09" | 0.06" | 0.029" | 0000000 | 000000 |
| 0.038" | 1" | 0.29" | 0.104" | 0.038" | 0000000 | 000000 |
| 0.038" | 1.81" | 0.68" | 0.122" | 0.038" | 0000000 | 000000 |
| 0.06" | 1" | 0.29" | 0.105" | 0.06" | 0000000 | 000000 |
| 0.06" | 1.75" | 0.64" | 0.143" | 0.06" | 0000000 | 000000 |
| 0.094" | 1.75" | 0.55" | 0.187" | 0.094" | 0000000 | 000000 |
| 0.094" | 2.75" | 0.97" | 0.181" | 0.094" | 0000000 | 000000 |
304 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.051" | 1.81" | 0.69" | 0.118" | 0.051" | 0000000 | 000000 |
| 0.051" | 2.75" | 1.07" | 0.128" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
| 0.076" | 2.63" | 1.07" | 0.13" | 0.076" | 0000000 | 000000 |
| 0.114" | 1.69" | 0.59" | 0.179" | 0.114" | 0000000 | 000000 |
316 Stainless Steel | ||||||
| 0.041" | 1" | 0.3" | 0.098" | 0.041" | 0000000 | 000000 |
| 0.051" | 1" | 0.3" | 0.099" | 0.051" | 0000000 | 000000 |
| 0.076" | 1.75" | 0.68" | 0.12" | 0.076" | 0000000 | 000000 |
Perforated Panels
Circle
Diamond
Square
Weave
Oval
Perforated panels are for use in decorative applications. They can be cut, formed, and welded.
Steel is lightly oiled.
3003 aluminum is easier to form than 1100 aluminum. It's about half the weight of steel and resists corrosion in wet environments.
Overall | Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Opening Pattern | Thick. | Wd. Tolerance | Lg. Tolerance | Wd. | Lg. | Open Area | Each | |
36" × 40" | ||||||||
Carbon Steel | ||||||||
| Circle | 0.031" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 0000000 |
| Diamond | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Square | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 00000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 000000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.75" | 0.75" | 56% | 0000000 | 000000 |
| Weave | 0.025" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 00000 |
3003 Aluminum | ||||||||
| Circle | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 000000 |
| Diamond | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Oval | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.75" | 66% | 0000000 | 00000 |
| Weave | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 00000 |
36" × 60" | ||||||||
Carbon Steel | ||||||||
| Circle | 0.031" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 000000 |
| Diamond | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Square | 0.038" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 000000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.5" | 0.5" | 53% | 0000000 | 000000 |
| Square | 0.063" | -1/8" to +1/8" | -1/8" to +1/8" | 0.75" | 0.75" | 56% | 0000000 | 000000 |
| Weave | 0.025" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 000000 |
3003 Aluminum | ||||||||
| Circle | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 44% | 0000000 | 000000 |
| Diamond | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.5" | 64% | 0000000 | 000000 |
| Oval | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | 0.25" | 0.75" | 66% | 0000000 | 000000 |
| Weave | 0.032" | -1/8" to +1/8" | -1/8" to +1/8" | __ | __ | 53% | 0000000 | 000000 |
Stacking Caps and Targets
Stacking Cap
Target
Weld these caps and targets to the ends of posts to create stackable shelving and racking systems. The stacking caps fit into the targets and provide the stability you need for stacking structures on top of one another. They can also be used to replace damaged caps and targets in existing systems.
For technical drawings and 3-D models, click on a part number.
For Post | Target Mounting | Overall | ||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Wd. | Dp. | Wd. | Dp. | Ht. | Each | |
Steel | ||||||||
Stacking Cap | ||||||||
| 1 1/2" | 1 1/2" | __ | __ | __ | __ | 1 1/2" | 0000000 | 00000 |
| 1 3/4" | 1 3/4" | __ | __ | __ | __ | 2" | 0000000 | 0000 |
| 2" | 2" | __ | __ | __ | __ | 1 7/8" | 0000000 | 0000 |
| 2 1/2" | 2 1/2" | __ | __ | __ | __ | 2" | 0000000 | 0000 |
Target | ||||||||
| 1 1/2", 2" | 1 1/2", 2" | 1 1/2" | 1 1/4" | 4" | 4" | 1 7/16" | 0000000 | 0000 |
| 2 1/2" | 2 1/2" | 1 1/2" | 1 1/2" | 5" | 5" | 1 5/8" | 0000000 | 0000 |