The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

Push the lever to lock the handle and prevent accidental opening.

Weld these clamps to the side of an object or drill your own holes in the mounting plate and bolt into place.

Two sets of mounting holes allow mounting on the bottom or side.

The handle locks in a horizontal position for more clearance above the clamp.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

These clamps have mounting holes on the bottom.

Turn the handle to tighten these multipurpose tools for strong clamping in nearly any application.

With five times the capacity of standard C-clamps, these are the highest capacity clamps we offer.

These clamps are made of stainless steel for excellent corrosion resistance.

All components of these clamps are made of aluminum-bronze that is Factory Mutual approved. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Plastic clamping surfaces prevent damage to material.

Clamp farther in from the edge of a workpiece than with other C-clamps.

Apply pressure to the side of a workpiece as well as the top and bottom.

Hold the workpiece down against a bench or table.

Clamp up to three workpieces at 90° angles.

The clamping arm slides freely along the bar for quick, one handed positioning. Tighten the screw onto a workpiece and the arm locks in place.

For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps.

Pull the lever to slide the clamping arm along the bar; release to lock in place.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp.

Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Clamp much farther in from the edge of the workpiece than with standard bar clamps.

Turn the knob to adjust the opening size.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Fit the draw arm over a latch plate and pull the handle to clamp.

Hold pipe and fittings together for tack welding.

Push or pull the plunger to hold your workpiece from the side.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

The handle can be rotated 125° for easier access or extra clearance above the clamp.

Push the lever to lock the handle and prevent accidental opening.

Perform a variety of welding tasks. These pliers have serrated jaws that remove weld spatter and grip, pull, and cut wire. They can also be used to install and remove contact tips and nozzles and turn fittings, nuts, and bolts.

Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures for welding and assembly.

Mount workpiece holders, light machinery, collaborative robots, and other components onto these tables to create custom workspaces, no drilling or tapping required.

Shorter than coats, jackets cover your hips.

Bright colors and reflective stripes make workers stand out in low-visibility areas. Jackets cover your hips.

Wear these fitted pants under clothing for an added layer of protection.

Protect your torso and thighs from heat and sparks when welding.