A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.

Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

The porous bond leaves more space between abrasive grains so heavy amounts of chips and coolant easily flow through.

Made with boron nitride, second in hardness to diamond, these wheels are highly wear resistant and easily cut difficult-to-grind steel parts.

The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.

An extra-fine layer of fiberglass mesh reinforcement allows these wheels to make smoother cuts than standard bench-grinder cutoff wheels when cutting metal such as aluminum, iron, stainless steel, and steel.

Use these wheels to cut through metal such as iron, stainless steel, and steel.

Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel.

Made with diamond, the strongest abrasive material, these wheels are extremely hard and wear resistant, so they stand up to ceramics and glass.

Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel.

Use these wheels to cut through metal such as iron, stainless steel, and steel.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.

The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel.

For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels.

Made of diamond abrasive, these wheels cut ceramics, tile, and other abrasive materials.

Use these wheels for cutting soft metal, plastic, stone, and wood.

These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.

These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.

These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile cast iron.