More compressible than seals with a solid bulb, these seals have a hollow bulb.

Able to withstand temperatures up to 500° F, these all-rubber silicone seals resist water and salts.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.

Made of silicone rubber, these seals can handle temperatures up to 500° F, plus they resist water and salts.

Made of solid silicone foam rubber, these seals also resist water and salts.

These solid silicone rubber seals also stand up to water and salts.

These seals are made of solid EPDM foam rubber.

Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

These seals have solid construction.

These hollow seals offer better compressibility than solid seals.

The foam core makes these vinyl rubber seals firmer and more durable than hollow seals. They also resist salts and detergents.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

Able to withstand temperatures up to 1000° F, these seals have a fiberglass cover and core that resists most refrigerants, salts, and grease.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

A ceramic cover makes these seals more chemical resistant than the seals with a silica cover. They resist acids (except hydrofluoric and phosphoric), diluted alkalies, most refrigerants, salts, and grease. Seals can withstand temperatures up to 1700° F.

No need to drill mounting holes, this weatherstripping has a peel-and-stick adhesive backing.

Create a frosted effect on windows to block the view.

Dim incoming light while reducing heat transfer through your windows. In the summer, film reflects the sun's heat; in the winter, it minimizes heat loss.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

With a surface resistivity of 1.4 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

This trim has a metal core for added strength and stability. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Even after extended compression, these sheets and strips will bounce back to shape.

These sheets and strips will bounce back to shape, even after extended compression.

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Unlike standard silicone sealants, this silicone sealant can be painted.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.