The toughest bits available, these withstand the shock and twisting force of impact drivers. They have a magnet that holds steel hex nuts and cap screws in place. The groove in the shank fits directly into power tools.

For technical drawings and 3-D models, click on a part number.

Also known as nut setters, these bits turn hex nuts and cap screws.

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.

For technical drawings and 3-D models, click on a part number.

A magnet holds the nut in place. These bits have a groove in the shank to fit directly into power tools.

For technical drawings and 3-D models, click on a part number.

Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.

Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. For those without a voltage detector, bits turn four screw sizes and the shaft two external hex sizes. Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft three external hex sizes.

Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.