Surface mount with the adhesive back to route low-voltage data and control cable where you can't get inside walls.

Insert and remove cable at any point along the length of this open-top, hook-shaped raceway.

This raceway system is also known as wireway and wire trough.

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Faster to install than standard slotted wire duct, attach this to flat, clean surfaces.

Route wire and cable around curves with this bendable wire duct.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.

Connect different sizes of conduit.

Join pieces of conduit.

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.

The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Join different sizes of conduit.

Ground conduit by running a ground wire through the attached lug.

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Join pieces of conduit.

Connect different sizes and genders of conduit.

Connect different sizes of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Join pieces of conduit.

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Transition between types of conduit.

These cable ramps handle heavy pedestrian and equipment traffic.

Lay your cable in the slit on the top so it stays off the floor.

Protect cable from carts, pedestrians, and other light indoor traffic.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

Bands of corrosion-resistant stainless steel surround flexible nylon to make these the most durable, protective enclosed carriers we offer.

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

These are the most corrosion-resistant tray systems we offer.

Create a system to route cable and hose by connecting components such as straight trays and tees.