Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Power electronics in damp environments while protecting them from electromagnetic interference.

Use these connectors in general purpose residential and commercial applications.

These receptacles are for light-duty use.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Prevent damage to electronic equipment caused by spikes in voltage.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

An indicating light that is visible from any angle lets you know when these plugs have power. They have an extra-tight fit when mated with a receptacle to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Snap these receptacles into a cutout on an electrical panel—no screws or clips needed.

Keep personnel safe from electric shock by adding ground fault protection to all outlets on the same circuit. These receptacles mount to DIN rail.

Combine straight-blade and turn-lock styles in one receptacle for convenience.

Connect one end to a fixture and the other to a ballast. These connectors allow you to safely disconnect a failed ballast without exposing you to live wires.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Plug these cords into fans that have quick-disconnect terminals.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.

Create a secure, vibration-resistant connection on both ends—these cords have a hospital-grade plug and a locking connector on the socket.

Designed for indoor applications, these cords are often used to power appliances.

All cords have a country-specific plug to power equipment from international outlets.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Power devices that have a straight-blade connection from a vehicle outlet.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

Add grounding or surge suppression protection.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Automatically power heating and cooling devices on and off when temperatures rise or drop.

Attach these splitters to an extension cord to power multiple devices from one cord.