Submersible Insulation-Piercing Butt Splices
Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water. These splices have termination buttons on each end, so you can make independent connections on both sides. Since you connect each end independently, they’re often used as a disconnect point on equipment that you’ll be moving around. To install these splices, use a pair of pliers to press down on the button until it clicks.
On 2-wire splices, each button comes in one of three colors that correspond with wire gauge, making it easy to match your wire to the right connector.
4-wire splices have two entry points on both ends for twice as many independent connections as 2-wire splices.
For technical drawings and 3-D models, click on a part number.
| For Wire Gauge  | For Wire Type | Max. Insulation OD (For Wire Gauge) | Length | Color | Insulation | Insulation Material | Terminal Material | Maximum Voltage | Maximum Temperature, °F | Environmental Rating | Specifications Met | Each | |
2-Wire Inline Wire Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 14-12 | Solid, Stranded | 0.17" (14-12) | 1.89" | Yellow | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP08 | UL Listed | 0000000 | 00000 |
| 14-12 to 16-14 | Solid, Stranded | 0.15" (14-12), 0.17" (16-14) | 1.89" | Yellow and Blue | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP08 | UL Listed | 0000000 | 0000 |
| 14-12 to 18-16 | Solid, Stranded | 0.13" (14-12), 0.17" (18-16) | 1.89" | Yellow and Red | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP08 | UL Listed | 0000000 | 0000 |
| 16-14 to 18-16 | Solid, Stranded | 0.13" (16-14), 0.17" (18-16) | 1.89" | Blue and Red | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP08 | UL Listed | 0000000 | 0000 |
| 18-16 | Solid, Stranded | 0.13" (18-16) | 1.89" | Red | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP08 | UL Listed | 0000000 | 0000 |
4-Wire Inline Wire Connection | |||||||||||||
| 22-20 | Solid, Stranded | 0.11" (22-20) | 1.43" | Blue | Fully Insulated | Polycarbonate Plastic | Bronze | 600V AC 600V DC | 220° | IP05, IP07, IP08 | UL Listed | 0000000 | 0000 |
Insulation-Piercing Crimp-On Wire Splicing Connectors
No wire stripping is required—these connectors pierce the insulation.
Gel-filled connectors protect your connection from corrosion, humidity, water, and dirt.
Crimper (sold separately) is required for wire installation.
For technical drawings and 3-D models, click on a part number.
| For Wire Gauge | Min. Wire Combination | Max. Wire Combination | For Wire Type | Insulation Material | Terminal Material | Max. Voltage | Max. Current | Features | Pkg. Qty. | Pkg. | |
| 24-16 | Four 24-ga. Wires | Three 16-ga. Wires | Solid, Stranded | Polyolefin Plastic | Tin-Plated Bronze | 50V DC | 175 mA | __ | 100 | 000000 | 00000 |
| 24-16 | Four 24-ga. Wires | Three 16-ga. Wires | Solid, Stranded | Polyolefin Plastic | Tin-Plated Bronze | 50V DC | 175 mA | Gel Filled | 100 | 000000 | 00000 |
| Crimper | 000000 | Each | 00000 |
Circuit Board Terminals
Terminals fit into 0.042" dia. holes so you can make connections to a circuit board.
Push the clamp-on terminal into the hole so that the clamp sits flush on top of the board. Solder your wire into the clamp.
