McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products

    MIG Welders

    Image of Product. Front orientation. MIG Welders.
    Powerful, practical, and made in the U.S., our Lincoln MIG welder plugs into common 120V outlets to produce an output range of 30-140 amps. That’s enough power to weld steel as thick as 3/16" in a single pass.
    The system comes with a gun, nozzles, contact tips, sample spools of wire, and everything else you need for gasless, flux-cored welding. For solid-core MIG welding, connect the regulator to a tank of shielding gas (not included).
    For
    Material Thk.
    For Sheet
    Metal Thk.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Min.
    Max.
    Min.
    Max.
    Voltage,
    V AC
    Freq.,
    Hz
    Electrical
    Phase
    Output Current
    @ Voltage
    Includes
    Each
    Lincoln Easy-MIG 140
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"11/64"24712060Single90 amp @ 19.5V DCWelding Gun Contact Tips
    1/2-lb. Spool of 0.025" Copper-Coated Steel Solid Wire
    1/2-lb. Spool of 0.035" Steel Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Welding Hose
    Argon-Mixed Gas Regulator
    Gas Nozzle for Welding Solid-Core Wire
    Gasless Nozzle for Welding Flux-Core Wire    		7264A120000000
     
    Accessories for MIG Welders
    Carts
    Image of Product. Front orientation. Carts.
    Transport your welder from place to place while securing your gas tank from falling over. The angled top surface allows for easy access to the welder’s controls, with a lower tray for added storage.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000
    Aluminum Welding Kits for MIG Welders
    Image of Product. Top orientation. Aluminum Welding Kits for MIG Welders.
    Kits include a spool gun that houses aluminum wire in the gun itself, reducing the length of travel and risk of tangles.
    Includes
    Each
    Gun with Spool Mount
    1-lb. Spool of 0.035" 4043 Aluminum Solid Wire
    Welding Gun Contact Tips
    Electric Harness with Toggle Switch
    Carrying Case    		7264A150000000

    Multiprocess Welders

    Image of Product. Front orientation. Multiprocess Welders.
    Repair most metal with a single machine—these welders perform MIG, TIG, and stick welds. Often used for general purpose applications, MIG welding is faster than other techniques and easiest to learn. TIG welding works on thin metal and leaves a clean appearance, so it’s commonly used for finish work. Stick welding is best for heavy duty welds on thick or dirty metal. It’s also the easiest to do outdoors, since it doesn’t use shielding gas that could be affected by wind.
    Input
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    For Min.
    Material Thk.
    For Min.
    Sheet Metal Ga.
    Duty Cycle
    Voltage,
    V AC
    Frequency,
    Hz
    Electrical
    Phase
    Output Current @ Voltage
    Wt.,
    lb.
    Includes
    Each
    Lincoln K3461-1
    Solid
    		Flux Core0.025", 0.030", 0.035"1/64"246 Minutes On, 4 Minutes Off12060Single115 amp @ 15V AC
    80 amp @ 23V AC
    95 amp @ 19V AC    		351/2-lb. Spool of 0.025" ER70S-6 Solid Wire
    1/2-lb. Spool of 0.035" E71T-11 Flux-Core Wire
    10-ft. Ground Cable with Ground Clamp
    Gas Nozzle for Welding Solid-Core Wire
    Gas Regulator
    Gasless Nozzle for Welding Flux-Core Wire
    Welding Gun Contact Tips    		3729N110000000
     
    Accessories for Multiprocess Welders
    TIG Torches
    Image of Product. Front orientation. TIG Torches.
    TIG torches are required for TIG welding.
    Torch Body
    Type
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Rigid Neck6 Minutes On, 4 Minutes Off125Air12.5Rubber
    		Cable and Hose Assembly
    Long Back Cap
    Torch Body
    Torch Handle    		3729N5530000000
    Welding Foot Pedals
    Image of Product. Front orientation. Welding Foot Pedals.
    Welding foot pedals let you control amperage while TIG welding.
    Cable Lg.,
    ft.
    Each
    133729N5540000000
    MIG Spool Guns
    Image of Product. Front orientation. MIG Guns.
    MIG spool guns hold welding wire for use when MIG welding aluminum.
    For Wire
    Construction
    For Welding Wire
    Construction
    For Wire Dia.
    Duty Cycle
    Max. Current,
    amp
    Cooling
    Method
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Spool Gun
    Solid
    		Flux Core, Metal Core0.030", 0.035"3 Minutes On, 7 Minutes Off130Air10Rubber
    		1-lb. Spool of 0.035" ER4043 Solid Wire
    Three Contact Tips
    Nozzle
    Carrying Case    		3729N5520000000
     
    Carts
    Image of Product. Front orientation. Carts.
    Use carts to transport welders, gas, and accessories.
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Each
    27"11 3/4"7"7264A1130000000

    MIG Guns

    Image of Product. Front orientation. MIG Guns. Standard Gun.
    Image of Product. Front orientation. MIG Guns. Spool Gun.

    Standard Gun

    Spool Gun

    Pair these guns with a welder to direct the flow of MIG welding wire and electric current. With no need for a filler rod, MIG welding is faster than TIG welding, and ideal for thick base metals, including iron beams and carbon steel. At four pounds or less, our MIG guns are comfortable to hold, ensuring steady-handed results with every job. Guns with longer duty cycles can weld at their full amperage for longer periods of time without overheating.
    Check the max current amperage and manufacturer of your welder. Using a gun with a higher amperage than your welder can cause damage to both.
    Spool Gun—Spool MIG guns house wire in the gun, closer to where you’re welding, rather than in the welder itself. Often used for welding aluminum, they prevent soft wire from kinking in your cable since it doesn’t have to travel as far.
    Water Cooled—Water-cooled guns cycle water through the cable and the neck of the gun, which transfers the excess heat back to a radiator. This cools more efficiently than air-cooled guns, so you can weld for longer without stopping due to overheating.
    For Wire
    Max. Current,
    amp
    For Mfr.
    Mfr. Model No.
    Construction
    Dia.
    Duty Cycle
    Cable Lg.,
    ft.
    Cable
    Material
    Includes
    Each
    Standard Gun
     
    Air Cooled
    100LincolnLincoln Magnum 100LSolid, Flux Core, Metal Core0.025", 0.030", 0.035"4 Minutes On, 6 Minutes Off10Rubber
    		Contact Tip
    Nozzle    		77365A820000000
    100MillerMiller MDX 100Solid, Flux Core, Metal Core0.030", 0.035"Continuous10Rubber
    		—77365A36000000
    180ESAB, Hobart, MillerTweco FusionSolid, Flux Core, Metal Core0.030", 0.035"4 Minutes On, 6 Minutes Off12Rubber
    		Contact Tip
    Nozzle    		77365A45000000
    180ESAB, LincolnTweco No. 1Solid, Flux Core, Metal Core0.030", 0.035", 0.040", 0.045"6 Minutes On, 4 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A42000000
    200LincolnLincoln Magnum 200Solid, Flux Core, Metal Core0.025", 0.030"6 Minutes On, 4 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A83000000
    250ESAB, MillerTweco Velocity2 Spray Master 250Solid, Flux Core, Metal Core0.035", 0.040", 0.045"8 Minutes On, 2 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A221000000
    250ESAB, LincolnTweco Velocity2 Spray Master 250Solid, Flux Core, Metal Core0.035", 0.040", 0.045"8 Minutes On, 2 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A28000000
    250LincolnLincoln Magnum PRO 250LSolid, Flux Core, Metal Core0.025", 0.030", 0.035", 0.040", 0.045"4 Minutes On, 6 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A84000000
    250MillerMiller MDX 250Solid, Flux Core, Metal Core0.030", 0.035"Continuous15Rubber
    		—77365A38000000
    300LincolnLincoln Magnum 300Solid, Flux Core, Metal Core0.035", 0.040", 0.045"6 Minutes On, 4 Minutes Off10Rubber
    		Contact Tip
    Nozzle    		77365A86000000
    350ESAB, MillerTweco Velocity2 Spray Master 350Solid, Flux Core, Metal Core0.063"8 Minutes On, 2 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A46000000
    350ESAB, LincolnTweco Velocity2 Spray Master 350Solid, Flux Core, Metal Core0.063"8 Minutes On, 2 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A47000000
    400LincolnLincoln Magnum 400Solid, Flux Core, Metal Core0.045", 0.047", 0.052", 0.063"6 Minutes On, 4 Minutes Off15Rubber
    		Contact Tip
    Nozzle    		77365A87000000
     
    Water Cooled
    400MillerMiller XR PistolSolid, Flux Core, Metal Core0.030", 0.035", 0.040", 0.045", 0.047", 0.052", 0.063"Continuous30Rubber
    		—77365A3900000000
    500ESABTweco Fusion Pro 7WSolid, Flux Core, Metal Core0.035", 0.040", 0.045", 0.047", 0.052", 0.063"Continuous12Rubber
    		Contact Tip
    Nozzle    		77365A4400000000
     
    Spool Gun
     
    Air Cooled
    200MillerMiller SpoolmaticSolid, Flux Core, Metal Core0.030", 0.035", 0.040", 0.045"Continuous15Rubber
    		—77365A3700000000
     

    MIG Gun Holders

    Image of ProductInUse. Front orientation. Welding Torch Holders. MIG Gun Holders.
    Rest your MIG gun on these holders when not in use.
    Overall
    Ht.
    Wd.
    Wt. Cap.,
    lb.
    Base
    Dia.
    Material
    Mount
    Type
    Each
    5 3/4"4"473 3/16"Stainless Steel
    		Magnetic4681N21000000

    Welder Carts

    Image of Product. Flush Shelf. Front orientation. Carts. Welder Carts, Flush Shelf.
    Image of Product. Lipped Shelf. Front orientation. Carts. Welder Carts, Lipped Shelf.
    Image of Product. Solid Platform. Front orientation. Carts. Welder Carts, Solid Platform.

    Flush Shelf

    Lipped Shelf

    Solid Platform

    Wheel your welding machine around the shop and keep its accessories organized on these carts. For smooth steering control, they have two swivel casters and two rigid axle-mounted wheels.
    Flush Shelf—Carts with a shelf have additional storage space for accessories such as wire feeders, fill rods, and gloves.
    Lipped Shelf—Carts with a shelf have additional storage space for accessories such as wire feeders, fill rods, and gloves.
    Shelf
    Wheel
    Lg.
    Wd.
    For Max. Gas
    Tank Dia.
    Overall Wt.
    Cap., lb.
    Lg.
    Wd.
    Top Shelf
    Ht.
    Handle
    Ht.
    Configuration
    Dia.
    Welding
    Process
    Includes
    Assembly
    Each
    Flush Shelf
     
    Plastic Tread-on-Core Wheels
    26"12"8"70026"12"11"27"Two Axle-Mounted Wheels and Two Swivel Casters3", 8"MIG, TIG, Stick
    		—Unassembled5147N1060000000
    27"11 3/4"7"13027"11 3/4"15 1/2"30 1/2"Two Axle-Mounted Wheels and Two Swivel Casters2", 6"MIG, TIG, Stick
    		—Unassembled7264A113000000
    30"15 1/4"8 1/4"20030"12"16 3/4"33 3/4"Two Axle-Mounted Wheels and Two Swivel Casters4", 6"MIG, TIG, Stick
    		—Unassembled5147N107000000
    30"20"9 1/2"70030"16"24"36"Two Axle-Mounted Wheels and Two Swivel Casters4", 8"MIG, TIG, Stick
    		—Unassembled5147N103000000
     
    Plastic Semi-Pneumatic Wheels
    48 1/2"21"9 1/2"1,00025"21"35"37 1/2"Two Axle-Mounted Wheels and Two Swivel Casters3", 10"MIG, TIG, Stick
    		—Assembled5147N10900000000
     
    Plastic Pneumatic Wheels
    40"24 1/2"9 1/2"70040"16"30 1/2"42"Two Axle-Mounted Wheels and Two Swivel Casters5", 10"MIG, TIG, Stick
    		—Unassembled5147N102000000
     
    Lipped Shelf
     
    Plastic Tread-on-Core Wheels
    33 1/2"18 1/2"9 1/2"70028"14"15"32"Two Axle-Mounted Wheels and Two Swivel Casters3", 8"MIG, TIG, Stick
    		—Unassembled5147N104000000
    38"16"9 1/2"1,00028"14"20"20"Two Axle-Mounted Wheels and Two Swivel Casters4", 10"MIG, TIG, Stick
    		—Unassembled5147N105000000
     
    Solid Platform
     
    Plastic Tread-on-Core Wheels
    42"20 1/2"9"350————Two Axle-Mounted Wheels and Two Swivel Casters2", 10"TIG
    		Bracket and chain for securing a gas tankUnassembled7373A2300000000
     

    Solder Wire Feeders

    Image of Product. Front orientation. Solder Wire Feeders.
    Image of Specification. Chisel Tip. Front orientation. Solder Wire Feeders. Chisel Tip.

    Chisel Tip

    Automatically feed solder wire to the tip of your iron. Use the buttons on these feeders to adjust the feed rate. They have an indicating light that turns off when they’re feeding wire.
    Tip
    Wattage,
    W
    Feed Rate,
    mm/s
    For Wire
    Dia. Range, mm
    Max. Wt.
    Cap., lb.
    Shape
    Point
    Wd.
    Connection
    Temp. Range,
    ° F
    Display
    Increments
    Duty
    Cycle
    Approx. Heat-Up
    Time, sec.
    Cord Lg.,
    ft.
    Includes
    Features
    Each
    Weller WTSF80
    801 to 270.5 to 12Chisel1/16"Plug200 to 8001°Continuous103One TipIndicating Light, Integrated Soldering Iron, ESD (Electrostatic Discharge) Safe5242N11000000000
     
    Accessories for Solder Wire Feeders
    Supplies
    Image of Product. Front orientation. Power Supplies. 1 Channel.
    Image of Product. Front orientation. Power Supplies. 2 Channels.
    Image of Product. Front orientation. Power Supplies. 3 Channels.

    1 Channel

    2 Channels

    3 Channels

    You’ll need a power supply (sold separately) to run these feeders. Choose one based on how many soldering tools you plan on using. Each tool will need one channel. WR power supplies automatically recognize your tools, so you can switch between a wire feeder, soldering iron, desoldering iron, or hot air iron without changing temperature settings. Use the USB connection to adjust standby temperature and the automatic shutoff timing. This also allows you to log soldering temperatures and update station firmware.
    No. of
    Channels
    Wattage,
    W
    Voltage,
    V AC
    Mfr. Model
    No.
    Electrical
    Connection Type
    Cord Lg.,
    ft.
    Features
    Each
    Weller
    195120WT1Plug In3ESD (Electrostatic Discharge) Safe5242N120000000
    2250230WR2Plug In3ESD (Electrostatic Discharge) Safe5242N1300000000
    3360230WR3MPlug In3ESD (Electrostatic Discharge) Safe5242N1400000000
     
    Tips
    Image of Product. Gullwing. Front orientation. Soldering Iron Tips.
    Image of Product. 30° Round. Front orientation. Soldering Iron Tips.
    Image of Product. Chisel. Front orientation. Soldering Iron Tips.
    Image of Product. Knife. Front orientation. Soldering Iron Tips.

    Gullwing

    30° Round

    Chisel

    Knife

    Image of Product. 45° Knife. Front orientation. Soldering Iron Tips.
    Image of Product. Bevel. Front orientation. Soldering Iron Tips.
    Image of Product. Conical. Front orientation. Soldering Iron Tips.
    Image of Product. Round. Front orientation. Soldering Iron Tips.

    45° Knife

    Bevel

    Conical

    Round

    Mfr. Model
    No.
    Tip
    Shape
    Max. Temp.,
    ° F
    Lg.
    Point
    Wd.
    Connection
    End Type
    Each
    LT Series, Weller
    1LConical8501 1/32"1/64"Plug7724A12800000
    1SARound85019/32"1/64"Plug7724A14200000
    1SLXRound85055/64"1/64"Plug7724A13400000
    4Bevel85019/32"3/64"Plug7724A13600000
    22CPBevel85025/32"5/64"Plug7724A1290000
    33CPBevel85025/32"1/8"Plug7724A13100000
    BBBevel85021/32"3/32"Plug7724A13700000
    CC 60Bevel85021/32"1/8"Plug7724A13800000
    DD 45Bevel85025/32"5/32"Plug7724A13900000
    FBevel85033/64"15/32"Plug7724A1320000
    GW1Gullwing85045/64"3/64"Plug7724A1330000
    GW2Gullwing85045/64"1/8"Plug7724A14500000
    KNKnife85021/32"5/64"Plug7724A14100000
    KNSLKnife85021/32"5/64"Plug7724A14400000
    LT1SRound8505/8"1/64"Plug7724A340000
    LTAChisel8503/8"1/16"Plug7724A540000
    LTASRound8503/8"1/16"Plug7724A510000
    LTBChisel8501/2"3/32"Plug7724A520000
    LTCChisel8501/2"1/8"Plug7724A550000
    LTCSRound8501/2"1/8"Plug7724A530000
    LTDChisel8501/2"3/16"Plug7008A1190000
    LTKChisel85013/16"3/64"Plug7008A1220000
    LTLChisel85013/16"5/64"Plug7008A1240000
    LTSRound85013/16"1/64"Plug7008A1260000
     
    back to top