Container Type Container Type |
|---|
 |  |
| Squeeze Bottle | Pail |
 |  |
| Aerosol Can | Pen |
 | |
| Spray Bottle |
For Use On For Use On |
|---|
Lubricant Type Lubricant Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Trade Name Trade Name |
|---|
|
About Lubricants
More
Penetrating Lubricants for Wire Rope and Cable Pulling
Use these lubricants to ensure smooth, consistent motion when pulling wire or cable through conduit. They provide long-lasting lubrication to support repositioning and maintenance after initial cable installation. Compatible with all cable and insulation types.
Lubricants without PTFE can be washed off with soap and water. Lubricants with PTFE provide maximum lubricity.
Extra-Thick Penetrating Lubricants
for Wire Rope and Cable
Spray these lubricants onto wire rope and cable used in vertical or fast-moving applications. They dispense as a thick gel, completely covering wire strands without dripping or running off. Use them to cut through dirt, grease, and rust, and to protect wire rope and cable. Lubricants come in an aerosol can with a flip-up straw that’s attached to the nozzle so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense lubricants as a spray.
Penetrating Lubricants for Wire Rope and Cable
By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.
Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. They can be applied while wire rope is in motion. Lubricants with PTFE leave no residue. They come in a pen for precision applications.
Container | |||||
|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Each | |
Sprayon LU 201 Open Gear & Wire Rope | |||||
| 14 oz. | Spray Bottle | Moly | 0° to 450° | 0000000 | 000000 |
| 5 gal. | Pail | Moly | 0° to 450° | 0000000 | 000000 |
Lubricants | |||||
| 0.4 oz. | Pen | PTFE | -60° to 500° | 0000000 | 0000 |
Container | ||||||
|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Sprayon LU 201 Open Gear & Wire Rope | ||||||
| 14 oz. | Spray Bottle | Moly | 0° to 450° | 12 | 0000000 | 0000000 |
Moisture-Resistant Penetrating
Lubricants for Wire Rope and Cable
Protect wire rope and cable from corrosion in wet environments. These lubricants have fast-penetrating solvents that quickly reach the core of wire rope and cable to remove water and protect against corrosion. Made with moly (molybdenum disulfide), they withstand high loads and have excellent wear resistance.
Dry-Film Lubricants for Wire Rope and Cable
Made of graphite in a thin oil, these lubricants penetrate wire rope and cable to the core. When the oil evaporates, it leaves behind a dry film of graphite that prevents wear and corrosion throughout the rope without attracting dust.
MIG Wire Lubricating Pads
Keep rusty wire and wire with a poor surface finish feeding smoothly. Do not use on aluminum wire.
| Pkg. Qty. | Pkg. | |
| 6 | 000000 | 000000 |