Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

These thimbles are also known as thin pattern thimbles.

The open-end design leaves more room for connections than other thimbles.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty clevis-end fittings. They are also known as hand swage fittings.

Squeeze the trigger to quickly release the latch.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Create fast connections with items, such as rope, chain, and straps.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

These rotate for easy positioning before a load is applied.

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Cut your own threads or weld the shank in place.

Weld these hooks into place.

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

These kits fit most hooks with a drilled pinhole.

To open, lift and twist the latch 90°.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

For extra security, these have a latch that snaps back into place to secure your load.These have excellent resistance to salt water and chemicals.

These hooks meet MS-87006.

One side is closed and the other is open.

Compress sleeves with more force than hydraulic hand tools.

Fray rope for splicing and to attach fittings.

Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope.