Wire Rope Cable | McMaster-Carr

	Material Material

	Finish Finish

Hot-Dipped Galvanized

	Attachment Type Attachment Type

	Plain
	Loop
	Clevis
	Eye
	Hook
	Reinforced Loop
	Ball with Shank
	Stop
	Tab
	90° Eye
	Latch
	Threaded Stud
	Carabiner
	Half Link with Removable Pin
	Latching Hook
	Mounting Plate
	Shackle
	Snap
	Split Ring
	Swivel Eye
	Swivel Fork
	Swivel Hook
	Swivel Split Ring
	Unthreaded Shank
	Weld On

	Capacity Capacity

30% of the Rope's
Capacity

40% of the Rope's
Capacity

70% of the Rope's
Capacity

80% of the Rope's
Capacity

85% of the Rope's
Capacity

90% of the Rope's
Capacity

95% of the Rope's
Capacity

100% of the Rope's
Capacity

Not Rated

	System of Measurement System of Measurement

Inch

Metric

	Diameter Diameter

	Length Length

	Application Application

Not for Lifting

For Lifting

For Pulling

	Fitting Type Fitting Type


Rope Clamp	Thimble

Swivel	Compression Sleeve

Link/Ring	Rope End

Shackle	Snap

Hook	S-Hook

Carabiner

	Wire Rope Coating Wire Rope Coating

Uncoated

Coated

	For Wire Rope Diameter For Wire Rope Diameter

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Flexibility Flexibility


Ultra Flexible	Extra Flexible

Flexible	Difficult to Bend

	Construction Construction

Braided with Wire Rope
Core

Twisted with Wire Rope
Core

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	Thickness Thickness

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Thread Size Thread Size

	Specifications Met Specifications Met

North American Cargo
Securement Standard
Requirements

OSHA

UL 94

	Core Type Core Type


Strand	IWRC

Fiber	Hollow

	Inside Width Inside Width

	Inside Length Inside Length

	For Rope Diameter For Rope Diameter

4,344 Products

Wire Rope—Not for Lifting

Extra-Flexible Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Wire Rope—Not for Lifting

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

Corrosion-Resistant Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Difficult-to-Bend Corrosion-Resistant
Wire Rope—Not for Lifting

Often used as bracing and guy wires, individual strands are thick solid wire for a stiff construction.

Extra-Flexible Coated Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Extra-Flexible Coated Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Coated Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Weather-Resistant Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Weather-Resistant
Coated Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Extra-Flexible Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Chemical-Resistant Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications.

Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Ultra-Corrosion-Resistant
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Ultra-Corrosion-Resistant Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Nonmagnetic Stainless
Steel Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Extra-Flexible Low-Stretch Coated
Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Low-Stretch Coated Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Nonmagnetic Stainless Steel Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Nonsparking Corrosion-Resistant
Wire Rope—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Nonsparking
Corrosion-Resistant Wire Rope—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Small-Diameter Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Small-Diameter
Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Extra-Flexible Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Chemical-Resistant Coated Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Extra-Flexible Chemical-Resistant Coated
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.

Extra-Flexible Coated Small-Diameter
Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Extra-Flexible Low-Stretch Coated
Small-Diameter Braided Wire—Not for Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Nonsparking Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

Not only is this phosphor bronze braided wire corrosion resistant, it inhibits sparking.

Coated Small-Diameter Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Ultra-Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

The superior corrosion resistance of nickel-copper makes this braided wire best for use with salt water and acidic- and alkaline-based solutions.

Low-Stretch Coated Small-Diameter
Braided Wire—Not for Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Difficult-to-Bend Coated Small-Diameter
Braided Wire—Not for Lifting

This braided wire has a stiff construction for use as bracing and guy wires.

Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Ultra-Flexible Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Rotation- and Corrosion-Resistant
Wire Rope—For Lifting

Use this wire rope when lifting in areas that are frequently washed down and require a rope that counteracts rotation.

High-Strength Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Ultra-Flexible High-Strength Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Ultra-Flexible Corrosion-Resistant
Wire Rope—For Lifting

More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.

Corrosion-Resistant Wire Rope—For Lifting

This wire rope provides a good balance of abrasion resistance and flexibility.

Rotation-Resistant Wire Rope—For Lifting

To counteract rotation while under load, the outer strands are wound in the opposite direction of the core.

Wear-Resistant Wire Rope—For Lifting

Flattened outer strands create a smooth surface area that spreads contact to reduce wear.

Wire Rope Clamps

Wire Rope Clamp and Thimble Kits—Not for Lifting

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Quick-Adjust Wire Rope Clamps—Not for Lifting

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

Forged One-Piece Wire Rope Clamps—Not for Lifting

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Crosby Forged Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.

Crosby Forged Double-Saddle
Wire Rope Clamps—Not for Lifting

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Easy-Install Wire Rope Clamps—Not for Lifting

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Wire Rope Clamps with Thimbles—Not for Lifting

A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.

Wire Rope Compression Sleeves

Wire Rope Compression Sleeves—For Lifting

These compression sleeves are designed to meet lifting specifications.

Wire Rope Compression Sleeves—Not for Lifting

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Wire Rope Compression Sleeve
Assortments—Not for Lifting

Keep multiple sleeves on hand in a variety of sizes.

Wire Rope Compression Sleeve
and Thimble Kits—Not for Lifting

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Wire Rope Thimbles

Medium Duty Wire Rope Thimbles—Not for Lifting

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Heavy Duty Wire Rope Thimbles—For Lifting

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

Open-End Light Duty Wire
Rope Thimbles—Not for Lifting

The open-end design leaves more room for connections than other thimbles.

Closed-End Light Duty Wire
Rope Thimbles—Not for Lifting

Smooth rounded edges and an endless design prevent snags.

Light Duty Wire Rope Thimbles—Not for Lifting

These thimbles are also known as thin pattern thimbles.

Plug-Lock Wire Rope End Fittings—For Lifting

Stud-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Swivel-Hook-End Plug-Lock Wire
Rope End Fittings—For Lifting

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Eye-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Assembly Kits for Plug-Lock Wire Rope End Fittings

Place the wire rope and sleeve through a hole in the assembly block and tighten into a vise to hold. Then attach the plug driver on the end of a plug to make hammering in the plug easier.

Clevis-End Plug-Lock Wire
Rope End Fittings—For Lifting

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Plugs for Plug-Lock Wire Rope End Fittings—For Lifting

Use a new plug when installing a fitting on a different rope.

Feed-Through Wire Rope End Fittings—Not for Lifting

Eye-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Clevis-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Hook-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Feed the wire rope into the opening at the bottom of these hook-end fittings and through the body for a quick and simple installation.

Roller Swage Wire Rope End Fittings—Not for Lifting

Ball-with-Shank-End Roller Swage
Wire Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Clevis-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Eye-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Stud-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Sleeve-Grip Wire Rope End Fittings—Not for Lifting

Mounting-Plate-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Add a mounting-plate to wire rope without having to fray the rope or use a compression tool.

Stud-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Clevis-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Eye-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Compression-Grip Wire Rope End Fittings—Not for Lifting

Eye-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Mounting-Plate-End Compression-Grip
Wire Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Clevis-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty clevis-end fittings. They are also known as hand swage fittings.

Stud-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Wedge-Lock Wire Rope End Fittings—For Lifting

Also known as open wedge sockets, these end fittings require only a torque wrench to install.

Wire Rope Stops—Not for Lifting

Wire Rope Lanyards—Not for Lifting

Loop-to-Loop Lanyards—Not for Lifting

Loop-to-Eye Lanyards—Not for Lifting

Ball with Shank-to-Plain-End Lanyards—Not for Lifting

Create-Your-Own Lanyards—Not for Lifting

Eye-to-Eye Lanyards—Not for Lifting

Eye-to-Tab Lanyards—Not for Lifting

Reinforced Loop-to-Loop Lanyards—Not for Lifting

A thimble on the inside of the loop protects the wire rope from fraying.

Loop-to-Tab Lanyards—Not for Lifting

Eye-to-90°-Eye Lanyards—Not for Lifting

Adjustable-Loop-to-Hook Lanyards—Not for Lifting

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Eye-to-Ball with Shank Lanyards—Not for Lifting

Mil. Spec. Eye-to-Ball with
Shank Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20664 and MS 20668.

Adjustable-Loop-to-90° Eye Lanyards—Not for Lifting

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Loop-to-90°-Eye Lanyards—Not for Lifting

Adjustable-Loop-to-Stud Lanyards—Not for Lifting

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Eye-to-Swivel-Fork Lanyards—Not for Lifting

The swivel fork allows the lanyard to rotate freely.

Mil. Spec. Eye-to-Eye Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668.

Adjustable-Loop-to-Twin-Hook Lanyards—Not for Lifting

Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.

Carabiner-to-Carabiner Lanyards—Not for Lifting

A large opening combined with an easy to open latch allows for quick and easy attachment to links and rings.

Mil. Spec. Eye-to-Stud Lanyards—Not for Lifting

Made to meet stringent military standards, the fittings on these lanyards meet MS 20668 and MS 21259.

Brackets for Ball with Shank End Fittings

Secure a ball with shank to a flat surface.

Retractable Wire Rope Lanyards—Not for Lifting

Loop-to-Loop Retractable Lanyards—Not for Lifting

Eye-to-Eye Retractable Lanyards—Not for Lifting

Loop-to-Tab Retractable Lanyards—Not for Lifting

Swivel-Fork-to-Swivel-Fork
Retractable Lanyards—Not for Lifting

The swivel fork ends allow the lanyard to rotate freely.

Loop-to-Eye Retractable Lanyards—Not for Lifting

Wire Rope with Fitting—For Lifting

Galvanized Steel Wire Rope with Hook—For Lifting

The galvanized finish resists corrosion.

Steel Wire Rope with Hook—For Lifting

This steel wire rope includes a hook with latch on one end for use with winches.

18-8 Stainless Steel Wire Rope with Hook—For Lifting

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Steel Wire Rope with Reinforced Loop—For Lifting

With a reinforced loop, also known as a thimble eye, installed on one end, quickly attach a hook or a shackle to a wire rope.

Galvanized Steel Wire Rope with
Reinforced Loop—For Lifting

The galvanized finish resists corrosion.

18-8 Stainless Steel Wire Rope
with Reinforced Loop—For Lifting

For use in washdown environments, this wire rope has better corrosion resistance than the galvanized steel wire rope.

Wire Rope with Stop—For Lifting

A stop, also known as a ferrule fitting, installed on one end holds the rope in place.

Wire Rope with Swivel Hook—For Lifting

The swivel hook with latch installed on one end, prevents the wire rope from twisting. It is for use with winches.

Swivels for Rope and Chain

Clevis-to-Clevis Swivels—Not for Lifting

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Eye-to-Eye Swivels—Not for Lifting

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Eye-to-Clevis Swivels—Not for Lifting

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Clevis-to-Clevis Ball Bearing Swivels—Not for Lifting

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Eye-to-Clevis Ball Bearing Swivels—Not for Lifting

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Eye-to-Eye Ball Bearing Swivels—Not for Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Split Ring-to-Snap Miniature Ball
Bearing Swivels—Not for Lifting

The snap and split ring swing freely and pull from the center for easy alignment.

Split Ring-to-Split Ring Miniature
Ball Bearing Swivels—Not for Lifting

These have split rings that swing freely and pull from the center for easy alignment.

Clevis-to-Clevis Ball Bearing Swivels—For Lifting

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Eye-to-Clevis Ball Bearing Swivels—For Lifting

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Eye-to-Eye Ball Bearing Swivels—For Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Links and Rings—For Lifting

Oblong Link Assemblies—For Lifting

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Oblong Links—For Lifting

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Pear-Shaped Links—For Lifting

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Rings—For Lifting

Use these links for general lifting applications.

Wire Rope and Chain Sling Identification Tags

Commonly used in conjunction with connecting links to meet OSHA 29 CFR 1910.184.

Nonremovable Figure-Eight
Connecting Links—For Lifting

Once secured with the included locking pin, these links must be cut off to be removed.

Removable Pear-Shaped Connecting Links—For Lifting

The wide end of these links has more room for attachments than standard figure-eight links.

Removable Figure-Eight Connecting Links—For Lifting

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

Removable Triangle-Shaped
Connecting Links—For Lifting

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Links with Chain-Shortening Hooks—For Lifting

A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.

Links and Rings—Not for Lifting

Oblong Links—Not for Lifting

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

Rings—Not for Lifting

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

D-Rings—Not for Lifting

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Pear-Shaped Links—Not for Lifting

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

90° Twist Threaded Connecting Links—Not for Lifting

The twisted shape of these links prevents loads from rotating or knotting.

Riveted Hammer-Close
Connecting Links—Not for Lifting

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Quick-Disconnect Connecting Links—Not for Lifting

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Oval-Shaped Threaded
Connecting Links—Not for Lifting

Also known as quick links, these links thread closed by hand or with a wrench.

Trapezoid-Shaped Threaded
Connecting Links—Not for Lifting

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Pear-Shaped Threaded
Connecting Links—Not for Lifting

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Medium Duty Hammer-Close
Connecting Links—Not for Lifting

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Removable Figure-Eight
Connecting Links—Not for Lifting

Often used with transport chain, these links are good for binding, tying down, and pulling loads.

Light Duty Hammer-Close
Connecting Links—Not for Lifting

Also known as lap links or repair links.

Triangle-Shaped Threaded
Connecting Links—Not for Lifting

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Square-Shaped Threaded
Connecting Links—Not for Lifting

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Shackles—For Lifting

Safety-Pin Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Screw-Pin Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Flush-Pin Shackles with Two Connectors—For Lifting

The pins have flush ends to prevent snagging and accidental disengagement.

Screw-Pin Chain Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Safety-Pin Web Sling Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Safety-Pin Chain Shackles—For Lifting

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Safety-Pin Shackles with Two Connectors—For Lifting

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Heavy Duty Shackles—For Lifting

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

Screw-Pin Web Sling Shackles—For Lifting

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Quick-Release Shackles—Not for Lifting

Pin-Release Eye Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Light Duty Collar-Release Shackles—Not for Lifting

Pull the collar to release the shackle from its locked position.

Lever-Release Shackles—Not for Lifting

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Pin-Release Clevis Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Shackles—Not for Lifting

Locking Screw-Pin Chain Shackles—Not for Lifting

Indentations in the shackle body hold the head of the pin in place once fastened.

Captive Locking Screw-Pin
Elongated Shackles—Not for Lifting

A lip on the shackle keeps the pin from falling out when loosened.

Screw-Pin Shackles—Not for Lifting

For use in low-vibration applications where the shackle remains stationary.

Captive Locking Screw-Pin Shackles—Not for Lifting

A lip on the shackle keeps the screw from falling out when loosened.

90° Twist Shackles—Not for Lifting

Minimize twisting and knotting of rope and chain.

Cotter Pin Shackles with Two Connectors and
Small and Large Openings—Not for Lifting

Locking Screw-Pin Elongated Shackles—Not for Lifting

Indentations in the shackle body hold the head of the pin in place once fastened.

Captive Locking Screw-Pin
Chain Shackles—Not for Lifting

A lip on the shackle keeps the pin from falling out when loosened.

Cotter Pin Shackles with Two Connectors
and Same-Size Openings—Not for Lifting

Screw-Pin Elongated Shackles—Not for Lifting

For use in low-vibration applications where the shackle remains stationary.

Slide-Bolt Snaps

Dual Slide-Bolt Snaps

Slide-Bolt Snaps with Hook

Slide-Bolt Snaps with Split Swivel Ring

Slide-Bolt Snaps with Flat Swivel Eye for Webbing

Slide-Bolt Snap with Split Swivel Ring Assortments

Slide-Bolt Snaps with Flat Eye for Webbing

Slide-Bolt Snaps with Swivel Eye

Slide-Bolt Snaps with Eye

Locking Snaps

Trigger-Release Snaps with Eye

Squeeze the trigger to quickly release the latch.

Wide-Mouth Trigger-Release Snaps with Eye

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Safety Trigger-Release Snaps with Eye

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Snaps with Trigger-Release Latches on Both Ends

Overlapping-Arm Snaps with Swivel Eye

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Wire-Lockable Slide-Bolt Snaps with Swivel Eye

Lock the bolt with wire or a cable tie for a secure connection.

Snaps

Snaps with Swivel Eye

These snaps have an eye that rotates for easy positioning.

Dual Snap Connectors

Load-Rated Snaps with Eye

Light Duty Snaps with Hook

Snaps with Eye

Create fast connections with items, such as rope, chain, and straps.

Light Duty Snaps for Webbing

Light Duty Snaps with Swivel Eye for Webbing

Light Duty Snaps with Swivel Hook

Light Duty Snaps with Swivel Eye

Load-Rated Snaps with Swivel Eye

Light Duty Snaps with Eye

Light Duty Snaps

Narrow Body Eye Hooks—For Lifting

Insert in eyes, links, rings, and other connectors with small openings. Also known as J-hooks.

Grab Hooks—For Lifting

Grab Hooks with Clevis and Securing Pin—For Lifting

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the clevis end.

Grab Hooks with Eye—For Lifting

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

Grab Hooks with Clevis—For Lifting

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

Grab Hooks with Eye and Securing Pin—For Lifting

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

Hooks—For Lifting

Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Oversized Eye Hooks with Swivel—For Lifting

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks with Swivel—For Lifting

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Half-Link Hooks—For Lifting

These have a removable half-link to attach large rings, links, and other closed fittings.

Oversized Eye Hooks—For Lifting

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Locking Hooks—For Lifting

Clevis Hooks with Spring-Close Locking
Latch and Ball-Bearing Swivel—For Lifting

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

Clevis Hooks with Load-Locking
Latch and Swivel—For Lifting

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

Eye Hooks with Spring-Close Locking
Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Clevis Hooks with Load-Locking Latch—For Lifting

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

Eye Hooks with Load-Locking Latch—For Lifting

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

Clevis Hooks with Spring-Close
Locking Latch and Swivel—For Lifting

These rotate for easy positioning before a load is applied.

Threaded-Stud Hooks with
Spring-Close Locking Latch—For Lifting

Screw these hooks into place and secure with the included nut.

Eye Hooks with Load-Locking
Latch and Swivel—For Lifting

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

Hoist Rings

Hoist Rings—For Lifting

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.

Side-Mount Hoist Rings—For Lifting

Choose these hoist rings when you need to lift your load from the side.

Shackle Hoist Rings—For Lifting

Remove the shackle after lifting while keeping the base installed for future use.

Nonswiveling Hoist Rings—For Lifting

The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.

Wrench-Tighten Hoist Rings—For Lifting

No need for a torque wrench—install these hoist rings using an adjustable wrench.

Wide-Mouth Hooks—For Lifting

Wide Mouth Clevis Hooks—For Lifting

Also known as foundry hooks, use these on thick molds, castings, and objects that don't have attachment points.

Wide Mouth Eye Hooks—For Lifting

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Latch Kits for Hooks

Spring Latch Kits for Hooks with Pinhole—For Lifting

These kits fit most hooks with a drilled pinhole.

Latch Kits for Hooks without Pinhole—For Lifting

Use these kits with hooks that doin't have a pinhole.

Spring Safety Latch Kits for
Hooks with Pinhole—For Lifting

Prevent accidental release and keep the tip from snagging.

S-Hooks

Open-End S-Hooks—Not for Lifting

Join, organize, and suspend objects with these S-hooks.

S-Hooks with Latch on One End—Not for Lifting

For extra security, these have a latch that snaps back into place to secure your load.

Bend-and-Stay S-Hooks—Not for Lifting

Bend these S-hooks by hand to hang large and small objects from almost any surface.

S-Hooks with Latches on Both Ends—Not for Lifting

The spring-loaded latches on these hooks snap back into place, securing your load.

Mil. Spec. S-Hooks—Not for Lifting

These hooks meet MS-87006.

Closed-End S-Hooks—Not for Lifting

These hooks have closed ends on both sides.

Combination Open- and Closed-End
S-Hooks—Not for Lifting

One side is closed and the other is open.

S-Hooks—For Lifting

Use these S-hooks for lifting applications.

Hooks—Not for Lifting

Grab Hooks with Eye—Not for Lifting

Often used in binding and tie-down applications, these securely hold a single link of chain.

Slip Hooks with Clevis—Not for Lifting

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Weld-On Hooks—Not for Lifting

Weld these hooks into place.

Slip Hooks with Unthreaded Shank—Not for Lifting

An unthreaded shank allows you to cut your own threads.

Grab Hooks with Clevis—Not for Lifting

Often used in binding and tie-down applications, these hooks have a narrow opening to securely hold a single link of chain.

Swivel Eye Hooks—Not for Lifting

These swivel hooks have a latch that ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Clevis Hooks—Not for Lifting

The latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

Slip Hooks with Eye—Not for Lifting

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Carabiners

Screw-Locking Carabiners—Not for Lifting

Lock by screwing the latch into the body.

Twist-Locking Carabiners—Not for Lifting

To open, lift and twist the latch 90°.

Slide-Release Carabiners—Not for Lifting

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Carabiners—Not for Lifting

Tools for Rope and Wire Rope

Multidiameter Compression Tools
for Rope and Wire Rope Sleeves

Single-Diameter Compression Tools
for Rope and Wire Rope Sleeves

Compression Tools for Wire Rope Sleeves
and Stops with Built-In Rope Cutter

Hydraulic Compression Tools for Wire Rope Sleeves

Compress sleeves with less effort than standard compression tools.

Hydraulic Bench-Top Compression
Tools for Rope and Wire Rope Sleeves

Compress sleeves with more force than hydraulic hand tools.

Wire Rope Pulling Clamps

Attach these clamps by running a wire rope through the jaws to create an attachment point anywhere along the wire rope.

Compression Tools for Compression-Grip
Wire Rope End Fittings

Bench-Top Roller Swage Presses
for Wire Rope End Fittings

Permanently mount this press on a bench top.

Marlin Spikes

Fray rope for splicing and to attach fittings.

Roller Swage Presses for Wire Rope End Fittings

Wire Rope Cutting Bands

Also known as seizing bands, these prevent fraying while cutting wire rope. Wrap the band around the wire rope and squeeze the flat end into the indented end.

Rope and End Fittings

Rope Compression Sleeves—Not for Lifting

Install with a compression tool to create a strong, permanent loop.

Comfort-Grip Reinforced
Wire-Core Rope—Not for Lifting

This soft cotton rope with twisted construction allows you to grip it tight without it slipping or hurting your hands.

Shock-Absorbing Reinforced
Wire-Core Rope—Not for Lifting

Often used with pulleys and sheaves, this nylon rope is more wear resistant than cotton, and has more stretch to help compensate for sudden force.

Chain—Not for Lifting

Sash Chain Lanyards

The chain has flat links that fold back on themselves for maximum flexibility. Use the split ring on one end to hold tags and keys.

Bead Chain Lanyards

Hoists and Hoist Trolleys

Air-Powered Wire Rope Hoists

These hoists are quieter and more stable than air-powered chain hoists.

Wire-Rope-Travel Hoist Cable Trolleys

Mount these trolleys to your existing wire rope to create a cable and hose travel system.

Beam-Travel Hoist Cable Trolleys

Mount these trolleys to your existing beam to create a cable and hose travel system.

Channel-Travel Hoist Cable Trolleys

Mount these trolleys to your existing channel to create a cable and hose travel system.

Channel-Travel Hoist Cable Trolley Systems

These systems include a series of small trolleys that travel along steel channel so they are stronger and run straighter than wire rope-travel systems and are better for high speeds.

Wire-Rope-Travel Hoist Cable Trolley Systems

These systems consist of a series of small trolleys that travel on the included wire rope, carrying your cable or hose along with them. Because these systems mount to the side of your crane, they require minimal structural support.

Electric Wire Rope Hoists

These hoists are quieter and more stable than electric chain hoists.

Wire Rope Slings

These slings are more abrasion and cut resistant than web and round slings, yet lighter in weight than mesh and chain slings.

Wire Rope Slings with Hooks

These slings attach quickly and securely to loads with lift attachments.

Pulleys

Pulleys for Wire Rope—For Lifting

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

Hanging Pulleys for Wire Rope—For Lifting

Hang these pulleys from hooks, screws, and bolts.

Easy-Open Hanging Pulleys for Wire Rope—For Lifting

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Mounted Pulleys for Wire Rope—For Lifting

Mount these pulleys to a flat surface.

Mounted Pulleys for Wire Rope—For Horizontal Pulling

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Pulleys for Wire Rope—For Horizontal Pulling

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Easy-Open Hanging Pulleys for
Wire Rope—For Horizontal Pulling

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hanging Pulleys for Wire Rope—For Horizontal Pulling

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Pulley Diameter Checkers

Also known as groove gauges, these measure the groove of your pulley to check for wear as well as determine the correct wire rope size.

Machinable Pulleys

Customize the groove and bore to fit your application.

Winches—For Lifting

Drill-Wind Precise-Positioning Heavy Duty
Hand Winches for Wire Rope—For Lifting

Remove the handle to wind these winches with a power drill and move loads more gradually than with other winches. The one-piece machined gears stand up to daily use.

Precise-Positioning Heavy Duty Hand
Winches for Wire Rope—For Lifting

Move loads more gradually than with other winches. These take longer to wind but require less effort. Their one-piece machined gears stand up to daily use.

Electric Winches for Wire Rope—For Lifting

An automatic brake holds the load, even when power is lost.

Corrosion-Resistant Heavy Duty Hand
Winches for Wire Rope—For Lifting

These winches are stainless steel for corrosion resistance. Their one-piece machined gears stand up to daily use.

Heavy Duty Hand Winches for Wire Rope—For Lifting

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.

Wall-Mount Heavy Duty Hand
Winches for Wire Rope—For Lifting

Tackle frequent lifting jobs with these rugged winches—their one-piece machined gears stand up to daily use.

Heavy Duty Electric Winches for Wire Rope—For Lifting

These winches operate longer than standard electric winches.

Hand Winches for Wire Rope—For Lifting

These winches are designed for occasional use.

Heavy Duty Air-Powered Winches
for Wire Rope—For Lifting

These winches operate longer and require shorter breaks than standard air-powered winches.

Air-Powered Winches for Wire Rope—For Lifting

Because these winches run on compressed air, they give you longer operating times than electric winches.

Winches—For Horizontal Pulling

Electric Winches for Wire Rope—For Horizontal Pulling

Use the handheld control to move loads horizontally.

Precise-Positioning Heavy Duty Hand Winches
for Wire Rope—For Horizontal Pulling

One-piece gears provide more durability than the riveted gears of other hand winches. These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.

Portable Electric Winches for Wire
Rope—For Horizontal Pulling

With a handle and mounting hook for portability, these winches can move from job to job.

Hydraulic Winches for Wire
Rope—For Horizontal Pulling

For high capacities and long life, these winches have a powerful hydraulic motor and hardened steel gears.

Drill-Wind Precise-Positioning Hand Winches
for Wire Rope—For Horizontal Pulling

Remove the handle to wind these winches with a power drill.

Hand Winches for Webbing—For Horizontal Pulling

Webbing wraps neatly around the winch to prevent tangles in the line.

Precise-Positioning Hand Winches
for Wire Rope—For Horizontal Pulling

These winches move loads more gradually than standard hand winches. They take longer to wind but require less effort.

Hand Winches for Wire Rope—For Horizontal Pulling

Turn the crank to move material horizontally. These winches wind faster than precise-positioning winches.

Electric Winches for Rope—For Horizontal Pulling

Rope does not accumulate on this winch, so it's good for longer lengths of rope than a standard winch can hold. Attach one end of your rope to the load, wind a few wraps on the winch, then pull the free end of the rope as the winch turns. Also known as a capstan winch.

Ratchet Pullers with Wire Rope

Rapid-Unwind Ratchet Pullers with Wire Rope

These pullers unwind four times faster than other pullers. Pullers provide the capacity of a winch in a versatile, portable tool. They have wire rope which is stronger than rope and webbing but not as bulky as chain.

Ratchet Pullers with Wire Rope

Pullers provide the capacity of a winch in a versatile, portable tool. The wire rope on these pullers is stronger than rope and webbing but not as bulky as chain.

Heavy Duty Ratchet Pullers with Wire Rope

These versatile pullers give you the capacity of a winch, and have a thick, rugged frame for long life. The wire rope on the pullers is stronger than rope and webbing but not as bulky as chain.

Corrosion-Resistant Ratchet Pullers with Wire Rope

These versatile pullers are made of aluminum with stainless steel rope for corrosive environments. They give you the capacity of a winch in a portable tool. Wire rope is stronger than rope and webbing but not as bulky as chain.

Hydraulic-Assist Multipurpose Bolt, Wire Rope, and Cable Cutters

Hydraulic-Assist Multipurpose Bolt,
Wire Rope, and Cable Cutters

Hydraulic-powered jaws cut bolts, wire rope, rods, and electrical cable with low effort and minimal material distortion.

Protective Equipment

Fall-Arrest Carabiners

Connecting Chain Links for Chain Barriers

Links split in half and snap back together. Use to connect two lengths of chain.

Tag Rings

Loop these rings onto tags.

Wire Rope Cutters

Lever-Operated Bench-Mount Wire Rope Cutters

Use the lever to make one-handed cuts with minimal material distortion. Cutter mounts to a workbench for extra stability and ease of use for repeated cuts.

Electrical-Insulating Wire Rope Cutters

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Heavy Duty Wire Rope Cutters

Keep your hands in a comfortable position so you can apply more force for cutting.

One-Handed Wire Rope Cutters

A small grip enables one-handed cutting.

High-Force Wire Rope Cutters

Cutters have double hinge that provides high cutting force with low gripping pressure.

Hammer-Driven Large-Diameter Wire Rope Cutters

With a quick hammer blow, these cutters make cuts without squeezing or flattening wire.

Hydraulic-Assist Lever-Operated
Large-Diameter Wire Rope Cutters

These manually operated cutters make a clean cut with just a few pumps of the handle.

Wire Rope Cutters

Minimize material distortion while cutting steel and stainless steel wire rope.

Tie-Down Winches

Pair these winches with straps to secure loads for transit.

Routing S-Hooks

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Cable Pullers

Figure-Eight Connectors

Often used in cable stringing and pulling applications, these connectors lock quickly and stay closed under tension.

Wire and Cable Pulling Clamps

Pull wire and cable while maintaining tension until the line can be permanently anchored. Use these clamps with stranded bare steel wire and cable.

Wire Rope—Not for Lifting

Extra-Flexible Wire Rope—Not for Lifting

Wire Rope—Not for Lifting

Difficult-to-Bend Wire Rope—Not for Lifting

Corrosion-Resistant Wire Rope—Not for Lifting

Extra-Flexible Corrosion-ResistantWire Rope—Not for Lifting

Difficult-to-Bend Corrosion-ResistantWire Rope—Not for Lifting

Extra-Flexible Coated Corrosion-ResistantWire Rope—Not for Lifting

Extra-Flexible Coated Wire Rope—Not for Lifting

Coated Wire Rope—Not for Lifting

Coated Corrosion-Resistant Wire Rope—Not for Lifting

Weather-Resistant Coated Wire Rope—Not for Lifting

Extra-Flexible Weather-ResistantCoated Wire Rope—Not for Lifting

Extra-Flexible Weather-Resistant CoatedCorrosion-Resistant Wire Rope—Not for Lifting

Weather-Resistant CoatedCorrosion-Resistant Wire Rope—Not for Lifting

Chemical-Resistant Coated Wire Rope—Not for Lifting

Extra-Flexible Chemical-Resistant CoatedCorrosion-Resistant Wire Rope—Not for Lifting

Chemical-Resistant CoatedCorrosion-Resistant Wire Rope—Not for Lifting

Extra-Flexible Ultra-Corrosion-ResistantWire Rope—Not for Lifting

Ultra-Corrosion-Resistant Wire Rope—Not for Lifting

Extra-Flexible Nonmagnetic StainlessSteel Wire Rope—Not for Lifting

Extra-Flexible Low-Stretch CoatedWire Rope—Not for Lifting

Low-Stretch Coated Wire Rope—Not for Lifting

Nonmagnetic Stainless Steel Wire Rope—Not for Lifting

Nonsparking Corrosion-ResistantWire Rope—Not for Lifting

Extra-Flexible NonsparkingCorrosion-Resistant Wire Rope—Not for Lifting

Small-Diameter Braided Wire—Not for Lifting

Small-Diameter Braided Wire—Not for Lifting

Difficult-to-Bend Small-DiameterBraided Wire—Not for Lifting

Extra-Flexible Corrosion-ResistantSmall-Diameter Braided Wire—Not for Lifting

Corrosion-Resistant Small-DiameterBraided Wire—Not for Lifting

Difficult-to-Bend Corrosion-ResistantSmall-Diameter Braided Wire—Not for Lifting

Chemical-Resistant Coated Small-DiameterBraided Wire—Not for Lifting

Extra-Flexible Chemical-Resistant CoatedSmall-Diameter Braided Wire—Not for Lifting

Extra-Flexible Coated Small-DiameterBraided Wire—Not for Lifting

Extra-Flexible Low-Stretch CoatedSmall-Diameter Braided Wire—Not for Lifting

Nonsparking Corrosion-ResistantSmall-Diameter Braided Wire—Not for Lifting

Coated Small-Diameter Braided Wire—Not for Lifting

Ultra-Corrosion-Resistant Small-DiameterBraided Wire—Not for Lifting

Low-Stretch Coated Small-DiameterBraided Wire—Not for Lifting

Difficult-to-Bend Coated Small-DiameterBraided Wire—Not for Lifting

Wire Rope—For Lifting

Wire Rope—For Lifting

Ultra-Flexible Wire Rope—For Lifting

Rotation- and Corrosion-ResistantWire Rope—For Lifting

High-Strength Wire Rope—For Lifting

Ultra-Flexible High-Strength Wire Rope—For Lifting

Ultra-Flexible Corrosion-ResistantWire Rope—For Lifting

Corrosion-Resistant Wire Rope—For Lifting

Rotation-Resistant Wire Rope—For Lifting

Wear-Resistant Wire Rope—For Lifting

Wire Rope Clamps

Wire Rope Clamp and Thimble Kits—Not for Lifting

Cast Wire Rope Clamps—Not for Lifting

Quick-Adjust Wire Rope Clamps—Not for Lifting

Forged One-Piece Wire Rope Clamps—Not for Lifting

Forged Stainless Steel Single-SaddleWire Rope Clamps—Not for Lifting

Crosby Forged Single-SaddleWire Rope Clamps—Not for Lifting

Crosby Forged Double-SaddleWire Rope Clamps—Not for Lifting

Easy-Install Wire Rope Clamps—Not for Lifting

Wire Rope Clamps with Thimbles—Not for Lifting

Wire Rope Compression Sleeves

Wire Rope Compression Sleeves—For Lifting

Wire Rope Compression Sleeves—Not for Lifting

Wire Rope Compression SleeveAssortments—Not for Lifting

Wire Rope Compression Sleeveand Thimble Kits—Not for Lifting

Wire Rope Thimbles

Medium Duty Wire Rope Thimbles—Not for Lifting

Heavy Duty Wire Rope Thimbles—For Lifting

Open-End Light Duty WireRope Thimbles—Not for Lifting

Closed-End Light Duty WireRope Thimbles—Not for Lifting

Light Duty Wire Rope Thimbles—Not for Lifting

Plug-Lock Wire Rope End Fittings—For Lifting

Stud-End Plug-Lock Wire Rope End Fittings—For Lifting

Swivel-Hook-End Plug-Lock WireRope End Fittings—For Lifting

Eye-End Plug-Lock Wire Rope End Fittings—For Lifting

Assembly Kits for Plug-Lock Wire Rope End Fittings

Clevis-End Plug-Lock WireRope End Fittings—For Lifting

Plugs for Plug-Lock Wire Rope End Fittings—For Lifting

Feed-Through Wire Rope End Fittings—Not for Lifting

Extra-Flexible Corrosion-Resistant
Wire Rope—Not for Lifting

Difficult-to-Bend Corrosion-Resistant
Wire Rope—Not for Lifting

Extra-Flexible Coated Corrosion-Resistant
Wire Rope—Not for Lifting

Extra-Flexible Weather-Resistant
Coated Wire Rope—Not for Lifting

Extra-Flexible Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

Weather-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

Extra-Flexible Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting

Extra-Flexible Ultra-Corrosion-Resistant
Wire Rope—Not for Lifting

Extra-Flexible Nonmagnetic Stainless
Steel Wire Rope—Not for Lifting

Extra-Flexible Low-Stretch Coated
Wire Rope—Not for Lifting

Nonsparking Corrosion-Resistant
Wire Rope—Not for Lifting

Extra-Flexible Nonsparking
Corrosion-Resistant Wire Rope—Not for Lifting

Difficult-to-Bend Small-Diameter
Braided Wire—Not for Lifting

Extra-Flexible Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

Difficult-to-Bend Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

Chemical-Resistant Coated Small-Diameter
Braided Wire—Not for Lifting

Extra-Flexible Chemical-Resistant Coated
Small-Diameter Braided Wire—Not for Lifting

Extra-Flexible Coated Small-Diameter
Braided Wire—Not for Lifting

Extra-Flexible Low-Stretch Coated
Small-Diameter Braided Wire—Not for Lifting

Nonsparking Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting

Ultra-Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting

Low-Stretch Coated Small-Diameter
Braided Wire—Not for Lifting

Difficult-to-Bend Coated Small-Diameter
Braided Wire—Not for Lifting

Rotation- and Corrosion-Resistant
Wire Rope—For Lifting

Ultra-Flexible Corrosion-Resistant
Wire Rope—For Lifting

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

Crosby Forged Single-Saddle
Wire Rope Clamps—Not for Lifting

Crosby Forged Double-Saddle
Wire Rope Clamps—Not for Lifting

Wire Rope Compression Sleeve
Assortments—Not for Lifting

Wire Rope Compression Sleeve
and Thimble Kits—Not for Lifting

Open-End Light Duty Wire
Rope Thimbles—Not for Lifting

Closed-End Light Duty Wire
Rope Thimbles—Not for Lifting

Swivel-Hook-End Plug-Lock Wire
Rope End Fittings—For Lifting

Clevis-End Plug-Lock Wire
Rope End Fittings—For Lifting

Eye-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Clevis-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Hook-End Feed-Through Wire
Rope End Fittings—Not for Lifting

Ball-with-Shank-End Roller Swage
Wire Rope End Fittings—Not for Lifting

Clevis-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Eye-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Stud-End Roller Swage Wire
Rope End Fittings—Not for Lifting

Mounting-Plate-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Stud-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Clevis-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Eye-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Eye-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Mounting-Plate-End Compression-Grip
Wire Rope End Fittings—Not for Lifting

Clevis-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Stud-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Mil. Spec. Eye-to-Ball with
Shank Lanyards—Not for Lifting

Swivel-Fork-to-Swivel-Fork
Retractable Lanyards—Not for Lifting

Galvanized Steel Wire Rope with
Reinforced Loop—For Lifting

18-8 Stainless Steel Wire Rope
with Reinforced Loop—For Lifting

Split Ring-to-Snap Miniature Ball
Bearing Swivels—Not for Lifting

Split Ring-to-Split Ring Miniature
Ball Bearing Swivels—Not for Lifting