Search Results
For Rope Diameter For Rope Diameter |
|---|
|
|
|
Material Material |
|---|
|
With or Without Bearing With or Without Bearing |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
OD OD |
|---|
Capacity Capacity |
|---|
|
Application Application |
|---|
|
Width Width |
|---|
|
|
|
Pulley Diameter Pulley Diameter |
|---|
Bearing Material Bearing Material |
|---|
|
Insertion Style Insertion Style |
|---|
|
Finish Finish |
|---|
|
About Pulleys
More
Pulleys for Wire Rope—For Horizontal Pulling
A
C
D
G
H
B
E
F
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
Without Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| A | 1/32" | Not Rated | 3/8" | 5/16" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 00000 |
| A | 1/32" | Not Rated | 5/8" | 1/2" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 3/4" | 5/8" | 1/8" | 3/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 1" | 13/16" | 3/16" | 3/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 1 1/16" | 7/8" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
| A | 1/16" | Not Rated | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
| A | 1/8" | Not Rated | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/16" | Not Rated | 1 9/16" | 1 1/4" | 1/4" | 3/8" | Acetal Plastic | 0000000 | 0000 |
| A | 1/4" | Not Rated | 1 15/16" | 1 9/16" | 5/16" | 7/16" | Acetal Plastic | 0000000 | 0000 |
| C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| C | 3/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
| C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
| C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 4 1/2" | 3 7/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| D | 5/16" | 1,600 | 5 1/2" | 4 5/8" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
| D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
With Sleeve Bearing | |||||||||
| G | 1/4" | 950 | 3" | 2 3/8" | 3/8" | 9/16" | Iron | 0000000 | 00000 |
| G | 3/8" | 1,250 | 3" | 2 1/4" | 3/8" | 13/16" | Iron | 0000000 | 00000 |
| G | 3/8" | 2,000 | 4" | 3 1/4" | 3/4" | 13/16" | Iron | 0000000 | 00000 |
| G | 1/2" | 3,000 | 5" | 3 7/8" | 3/4" | 1 1/16" | Iron | 0000000 | 00000 |
| G | 7/8" | 4,300 | 5 7/8" | 4 3/8" | 1 1/2" | 1 3/4" | Steel | 0000000 | 000000 |
| H | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 1/4" | 13/16" | Stainless Steel | 00000000 | 00000 |
| H | 3/16" | 1,500 | 3 1/4" | 2 3/4" | 3/8" | 15/16" | Stainless Steel | 00000000 | 00000 |
| H | 1/4" | 3,000 | 4 1/4" | 3 1/2" | 1/2" | 1 1/8" | Stainless Steel | 00000000 | 000000 |
| H | 5/16" | 5,000 | 5 1/4" | 4 3/8" | 1/2" | 1 3/8" | Stainless Steel | 00000000 | 000000 |
| H | 3/8" | 8,000 | 6 1/4" | 5 1/4" | 1/2" | 1 5/8" | Stainless Steel | 00000000 | 000000 |
With Ball Bearing | |||||||||
| B | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 1/8" | Nylon Plastic | 0000000 | 00000 |
| B | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 00000 |
| B | 3/64" | 90 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| B | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| B | 3/32" | 90 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
| B | 1/8" | 90 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
| E | 3/64" | 35 | 1/2" | 3/8" | 1/8" | 3/16" | Steel | 0000000 | 0000 |
| E | 3/32" | 175 | 1 1/16" | 7/8" | 3/16" | 5/16" | Steel | 0000000 | 0000 |
| E | 1/8" | 125 | 1" | 3/4" | 3/16" | 3/8" | Steel | 0000000 | 0000 |
| E | 3/16" | 175 | 1 1/4" | 7/8" | 1/4" | 7/16" | Steel | 0000000 | 0000 |
| E | 1/4" | 275 | 1 3/4" | 1 1/4" | 3/8" | 1/2" | Steel | 0000000 | 0000 |
| F | 3/16" | 85 | 1 1/4" | 1" | 5/32" | 7/16" | Steel | 0000000 | 00000 |
| F | 7/32" | 300 | 2 3/4" | 2 3/16" | 5/8" | 9/16" | Steel | 0000000 | 00000 |
| F | 11/32" | 300 | 2 3/4" | 2 3/8" | 3/8" | 9/16" | Steel | 0000000 | 00000 |
| F | 11/32" | 300 | 3" | 2 3/8" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
| F | 3/8" | 300 | 2 7/8" | 2 9/16" | 1/4" | 1/2" | Steel | 0000000 | 00000 |
| F | 3/8" | 300 | 3 1/16" | 2 9/16" | 3/8" | 1/2" | Steel | 0000000 | 00000 |
| F | 3/8" | 450 | 4 1/16" | 3 9/16" | 3/8" | 3/4" | Steel | 0000000 | 00000 |
| F | 7/16" | 325 | 3 3/8" | 2 11/16" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
| F | 1/2" | 275 | 3" | 2 5/8" | 5/16" | 3/4" | Steel | 0000000 | 00000 |
| F | 17/32" | 300 | 2 7/8" | 2 1/4" | 1/2" | 13/16" | Steel | 0000000 | 00000 |
| H | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| H | 3/16" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
| H | 1/4" | 1,200 | 4 1/4" | 3 1/2" | 1/2" | 1 1/16" | Stainless Steel | 0000000 | 00000 |
With Needle-Roller Bearing | |||||||||
| C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| C | 3/16" | 800 | 2 1/2" | 2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
| C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Horizontal Pulling
C
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove With Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Carabiner | ||||||||||||
| C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 0000000 |
Pulleys for Wire Rope—For Lifting
A
B
C
D
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a ball bearing are easier to turn than pulleys with a sleeve bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
With Sleeve Bearing
A
B
C
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Specifications Met | Each | ||
| A | 1/4" | 250 | 1 1/2" | 1 1/16" | 1/4" | 9/16" | Nylon Plastic | __ | 0000000 | 00000 |
| A | 1/4" | 750 | 2 3/4" | 2 1/4" | 5/16" | 9/16" | Nylon Plastic | __ | 0000000 | 0000 |
| A | 1/4" | 1,200 | 3" | 2 3/8" | 5/16" | 5/8" | Nylon Plastic | __ | 0000000 | 0000 |
| B | 1/8" | 675 | 2 1/2" | 2 1/4" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 0000 |
| B | 3/16" | 525 | 1 1/2" | 1" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
| B | 3/16" | 600 | 2" | 1 1/2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
| B | 1/4" | 675 | 2 1/2" | 2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 0000 |
| B | 1/4" | 800 | 3" | 2 1/2" | 1/2" | 1/2" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 00000 |
| B | 5/16" | 1,550 | 3 1/2" | 3" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 00000000 | 00000 |
| B | 3/8" | 1,700 | 4" | 3 1/4" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
| B | 3/8" | 1,850 | 5" | 4 1/4" | 3/4" | 11/16" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
| B | 3/4" | 6,000 | 6" | 5 3/16" | 1" | 1" | Zinc-Plated Steel | ASME B30.26 | 0000000 | 00000 |
| C | 1/4" | 1,200 | 4" | 3 1/4" | 1/2" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 1/4" | 1,200 | 4" | 3 1/4" | 3/4" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 5/16" | 1,800 | 5" | 4" | 3/4" | 1" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 3/8" | 1,600 | 4" | 3 1/8" | 1/2" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 3/8" | 1,600 | 4 1/8" | 3" | 1" | 1 1/2" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 3/8" | 1,700 | 4" | 3 1/8" | 3/4" | 13/16" | Powder-Coated Steel | __ | 0000000 | 00000 |
| C | 3/8" | 2,700 | 6" | 4 15/16" | 1 1/4" | 1 1/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 3/8" | 2,800 | 6" | 5" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 3/8" | 2,800 | 6" | 5" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 3/8" | 3,600 | 8" | 6 1/2" | 1 1/4" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 1/2" | 3,200 | 6" | 4 7/8" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 1/2" | 3,600 | 6" | 4 7/8" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 1/2" | 3,600 | 6" | 4 15/16" | 1 1/4" | 1 1/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 1/2" | 4,800 | 8" | 6 5/8" | 1" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 5/8" | 3,200 | 6" | 5" | 3/4" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 5/8" | 4,200 | 6" | 5" | 1" | 1 1/16" | Powder-Coated Steel | __ | 0000000 | 000000 |
| C | 5/8" | 6,000 | 8" | 6 5/8" | 1 1/4" | 1 3/8" | Powder-Coated Steel | __ | 0000000 | 000000 |
With Ball Bearing
D
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia., mm | Wd. | Material | Specifications Met | Each | ||
| D | 1/8" | 1,000 | 2 1/4" | 2" | 12 | 13/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 0000000 |
| D | 1/4" | 3,500 | 4 1/4" | 3 3/4" | 20 | 1 3/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
| D | 3/8" | 7,000 | 6" | 5 5/16" | 30 | 1 1/2" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
| D | 1/2" | 10,500 | 8" | 7" | 35 | 1 11/16" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
| D | 5/8" | 16,000 | 10" | 8 3/4" | 45 | 2" | Powder-Coated Steel | ASME B30.26 | 0000000 | 000000 |
Pulley Diameter Checkers
Also known as groove gauges, these measure the groove of your pulley to check for wear as well as determine the correct wire rope size.
| Includes | Each | |
| 14 Gauges in 1/4" to 1 1/2" Wire Rope Diameters | 0000000 | 000000 |
Machinable Pulleys
Customize the groove and bore to fit your application. The center of the pulley has a pilot hole so you can drill a bore to match a specific shaft size. Nylon is easy to machine yet resists impact and corrosion.