Wire Rope Shackles | McMaster-Carr

Filter by

Opening Width

Pin Type

Captive Locking Screw

Shackle Type

Material

Weight Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Inside Length

Application

Inside Width

Thickness

Finish

Attachment Type

Performance

Applied Load Direction

Safety Factor

Pin Material

For Use With

Straight-Link Chain Trade Size

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Color

For Web Width

288 Products

Shackle Type

Anchor

Handle vertical and side loads without warping

136 products

D-Type

The best choice for lifting and towing with chain

106 products

Shackle Type

Flat

Keep web slings from folding or bunching

17 products

Flexible

Wrap around a variety of lifting or anchor points

16 products

Anchor Shackles for Lifting

Screw Pin

Safety Cotter Pin

Flush

Hammer-Set-Dowel

Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

Flush Hammer-Set-Dowel Pin—Hammer in dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Black-Oxide Steel—The dark finish on these shackles resists occasional moisture.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

High-Strength Powder-Coated Alloy Steel—The powder-coating won't chip off as easily as paint. These shackles combine the strength of alloy steel with corrosion resistance in wet and outdoor environments.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met	Mil. Spec.		Each
Screw Pin







				Black-Oxide Steel

				3/16"	3/8"	1/4"	7/8"	9/16"	665	ASME B30.26	Fed. Spec. RR-C-271	8494T11	00000


				1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	8494T12	0000
				5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26	Fed. Spec. RR-C-271	8494T13	0000
				3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26	Fed. Spec. RR-C-271	8494T14	00000
				7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	8494T15	00000
				1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	8494T16	00000
				5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26	Fed. Spec. RR-C-271	8494T17	00000
				3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26	Fed. Spec. RR-C-271	8494T18	00000
				7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26	Fed. Spec. RR-C-271	8494T19	00000
				1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26	Fed. Spec. RR-C-271	8494T21	00000




						Galvanized Steel

						3/16"	13/32"	1/4"	29/32"	19/32"	600	ASME B30.26	—	3558T44	0000


						1/4"	1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26	Fed. Spec. RR-C-271	3558T45	0000
						5/16"	17/32"	13/32"	1 1/4"	13/16"	1,500	ASME B30.26	—	3558T46	00000
						7/16"	3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3558T48	00000
						1/2"	13/16"	5/8"	1 29/32"	1 5/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3558T49	00000
						5/8"	1 1/16"	3/4"	2 13/32"	1 23/32"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3558T51	00000
						3/4"	1 1/4"	7/8"	2 13/16"	2"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3558T52	00000
						7/8"	1 15/32"	1"	3 5/16"	2 9/32"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3558T53	00000
						1"	1 11/16"	1 1/8"	3 3/4"	2 11/16"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3558T54	00000
						1 1/8"	1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26	Fed. Spec. RR-C-271	3558T55	000000
						1 1/4"	2 1/32"	1 3/8"	4 23/32"	3 1/4"	26,400	ASME B30.26	Fed. Spec. RR-C-271	3558T56	000000


						1 3/8"	2 1/4"	1 17/32"	5 7/32"	3 5/8"	29,700	ASME B30.26	Fed. Spec. RR-C-271	3558T57	000000
						1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	—	3558T58	000000
						1 3/4"	2 31/32"	2"	7"	4 3/4"	50,000	ASME B30.26	—	3558T59	000000
						2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	70,000	ASME B30.26	—	3558T61	000000
						2 1/2"	4 1/8"	2 3/4"	10 1/2"	7 1/4"	110,000	ASME B30.26	Fed. Spec. RR-C-271	3558T62	00000000




								High-Strength Galvanized Alloy Steel

								3/8"	11/16"	15/32"	1 13/32"	1"	4,000	ASME B30.26	—	3663T51	00000


								7/16"	23/32"	1/2"	1 11/16"	1 3/16"	5,200	ASME B30.26	—	3663T53	00000
								1/2"	27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	—	3663T42	00000
								5/8"	1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	—	3663T43	00000
								3/4"	1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	—	3663T44	00000
								7/8"	1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	—	3663T45	00000
								1"	1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	—	3663T46	00000
								1 1/8"	1 27/32"	1 1/4"	4 1/32"	2 11/16"	30,000	ASME B30.26	—	3663T54	000000
								1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	—	3663T47	000000
1 1/2"								2 7/16"	1 21/32"	5 21/32"	3 1/2"	50,000	ASME B30.26	—	3663T48	000000
1 5/8"	2 21/32"							1 3/4"	6 1/8"	4 1/8"	58,000	ASME B30.26	—	3663T55	000000


1 3/4"	2 31/32"							2"	7"	4 3/4"	68,000	ASME B30.26	—	3663T52	000000
2"	3 9/32"	2 1/4"						7 15/32"	5 1/2"	86,000	ASME B30.26	—	3663T49	000000




		Highly Corrosion-Resistant 316 Stainless Steel

		3/16"	13/32"					1/4"	27/32"	19/32"	650	ASME B30.26	Fed. Spec. RR-C-271	3583T21	00000


		1/4"	15/32"					5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3583T11	00000
		5/16"	17/32"					3/8"	1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3583T12	00000
		3/8"	21/32"					7/16"	1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3583T13	00000
		7/16"	23/32"					1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3583T14	00000
		1/2"	13/16"					5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3583T15	00000
		5/8"	1 1/32"					3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3583T16	00000
		3/4"	1 1/4"					7/8"	2 27/32"	1 29/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3583T17	00000
		7/8"	1 15/32"					1"	3 5/16"	2 7/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3583T18	00000
		1"	1 11/16"					1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3583T19	000000
		1 1/4"	2 1/32"	1 3/8"				4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3583T22	000000


		Safety Cotter Pin







								Black-Oxide Steel

								1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	8494T26	00000


								5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26	Fed. Spec. RR-C-271	8494T27	00000
								3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26	Fed. Spec. RR-C-271	8494T28	00000
								7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	8494T29	00000
								1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	8494T31	00000
								5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26	Fed. Spec. RR-C-271	8494T32	00000
								3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26	Fed. Spec. RR-C-271	8494T33	00000
								7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26	Fed. Spec. RR-C-271	8494T34	00000
								1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26	Fed. Spec. RR-C-271	8494T35	000000




							Galvanized Steel

							3/16"		3/8"	1/4"	29/32"	5/8"	700	ASME B30.26	Fed. Spec. RR-C-271	3555T45	00000


							1/4"		1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26	Fed. Spec. RR-C-271	3555T46	00000
							5/16"		17/32"	13/32"	1 1/4"	27/32"	1,600	ASME B30.26	Fed. Spec. RR-C-271	3555T47	00000
							3/8"		11/16"	15/32"	1 15/32"	1 1/32"	2,200	ASME B30.26	Fed. Spec. RR-C-271	3555T48	00000
							7/16"		3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3555T49	00000
							1/2"		13/16"	21/32"	1 29/32"	1 5/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3555T51	00000
							5/8"		1 1/16"	25/32"	2 13/32"	1 23/32"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3555T52	00000
							3/4"		1 1/4"	29/32"	2 13/16"	2"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3555T53	00000
							7/8"		1 15/32"	1 1/32"	3 5/16"	2 9/32"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3555T54	000000
							1"		1 23/32"	1 5/32"	3 3/4"	2 23/32"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3555T55	000000
							1 1/8"		1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26	Fed. Spec. RR-C-271	3555T56	000000


							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	24,000	ASME B30.26	—	3555T57	000000
							1 3/8"		2 1/4"	1 1/2"	5 7/32"	3 1/4"	27,000	ASME B30.26	—	3555T78	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	—	3555T59	000000
1 3/4"							2 31/32"		2"	7"	4 3/4"	50,000	ASME B30.26	—	3555T61	000000
2"	3 9/32"						2 1/4"		7 15/32"	5 1/2"	70,000	ASME B30.26	—	3555T62	000000




							High-Strength Galvanized Alloy Steel

							1/2"		27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	—	8966T51	00000


							5/8"		1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	—	8966T52	00000
							3/4"		1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	—	8966T53	000000
							7/8"		1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	—	8966T54	000000
							1"		1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	—	8966T55	000000
							1 1/8"		1 27/32"	1 1/4"	4"	2 11/16"	30,000	ASME B30.26	—	8966T101	000000
							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	—	8966T76	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	60,000	ASME B30.26	—	8966T57	000000
							1 5/8"		2 21/32"	1 3/4"	6 1/8"	4 1/8"	70,000	ASME B30.26	—	8966T21	000000
							1 3/4"		2 31/32"	2"	7"	4 3/4"	80,000	ASME B30.26	—	8966T12	000000
		2"					3 9/32"		2 1/4"	7 15/32"	5 1/2"	100,000	ASME B30.26	—	8966T14	00000000




				Highly Corrosion-Resistant 316 Stainless Steel

				1/4"	1/2"		5/16"		1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3860T21	00000


				5/16"	17/32"		3/8"		1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3860T22	00000
				3/8"	11/16"		7/16"		1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3860T23	00000
				7/16"	3/4"		1/2"		1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3860T24	00000
				1/2"	27/32"		5/8"		1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3860T25	00000
				5/8"	1 1/32"		3/4"		2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3860T26	000000
				3/4"	1 1/4"		7/8"		2 27/32"	1 3/4"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3860T27	000000
				7/8"	1 1/2"		1"		3 5/16"	2"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3860T28	000000
				1"	1 23/32"		1 1/8"		3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3860T29	000000
				1 1/4"	2 1/32"		1 3/8"		4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3860T31	000000


				Flush Hammer-Set-Dowel Pin







								High-Strength Powder-Coated Alloy Steel

								7/16"	7/8"	9/16"	1 13/16"	1 3/32"	7,100	ASME B30.26	—	3812T22	00000


								9/16"	1 3/32"	3/4"	2 9/16"	1 11/32"	12,000	ASME B30.26	—	3812T23	00000
								11/16"	1 11/32"	15/16"	3"	1 5/8"	18,100	ASME B30.26	—	3812T24	00000
								13/16"	1 19/32"	1 7/32"	3 13/32"	1 15/16"	28,300	ASME B30.26	—	3812T31	000000
								1 1/16"	2"	1 7/32"	4 1/4"	2 11/16"	35,900	ASME B30.26	—	3812T33	000000
								1 5/16"	1 27/32"	1 7/16"	4 3/8"	1 27/32"	34,200	ASME B30.26	—	3812T32	000000

Flexible Shackles for Lifting

A flexible and lightweight option for lifting. Made of polyethylene rope with a nylon cover, these shackles wrap around a variety of lifting points without marring surfaces. All meet ASME specifications for rigging and lifting equipment. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Specs. Met		Each







Polyethylene Rope with Nylon Fabric Cover

9/16"	4"	3,300	ASME B30.26	3972N11	000000


9/16"	8"	3,300	ASME B30.26	3972N12	00000
21/32"	5"	5,200	ASME B30.26	3972N13	00000
21/32"	10"	5,200	ASME B30.26	3972N14	00000
3/4"	5"	6,700	ASME B30.26	3972N15	00000
3/4"	10"	6,700	ASME B30.26	3972N16	00000
15/16"	5"	8,600	ASME B30.26	3972N17	00000
15/16"	10"	8,600	ASME B30.26	3972N18	00000

Long-Reach D-Type Shackles

Screw Pin

Locking-Screw

Captive-Locking-Screw

Gain extra reach with these shackles. With an elongated body, they can connect loads to an anchor point too far for a standard shackle. They're best paired with chain, since their narrow bow prevents chain links from sliding or moving. These shackles are rated for inline tension only—they can’t handle pulling or tension to the side.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.

Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	5/32"	11/32"	5/32"	1 3/16"	11/32"	200	35685T56	00000


	3/16"	7/16"	3/16"	1 1/2"	7/16"	500	35685T52	0000
	1/4"	1/2"	1/4"	1 3/4"	1/2"	700	35685T43	00000
	5/16"	11/16"	5/16"	2 5/16"	11/16"	1,000	35685T54	00000
	3/8"	25/32"	3/8"	2 7/8"	25/32"	1,200	35685T55	00000
	1/2"	15/16"	15/32"	3 1/2"	15/16"	1,500	35685T57	00000


	Locking-Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					5/32"	11/32"	3/16"	7/8"	5/16"	300	3841T71	00000


					3/16"	13/32"	7/32"	1 5/32"	3/8"	400	3841T72	00000
					1/4"	1/2"	1/4"	1 5/16"	15/32"	700	3841T73	00000
					5/16"	21/32"	11/32"	1 3/4"	5/8"	1,100	3841T74	00000


					Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	3/16"	1 1/4"	5/16"	400	3841T81	00000


									3/16"	13/32"	7/32"	1 9/16"	3/8"	600	3841T82	00000
									1/4"	1/2"	1/4"	1 13/16"	15/32"	900	3841T83	00000
									5/16"	21/32"	11/32"	2 15/32"	5/8"	1,500	3841T84	00000

D-Type Shackles

Screw Pin

Flush Screw Pin

Locking-Screw Pin

Captive-Locking-Screw

Safety Cotter Pin

Pair these shackles with chain to pull and tow loads. The narrow bow prevents chain links from sliding or moving, but they're rated for inline tension only—they can’t handle pulling or tension to the side. Also known as chain shackles.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	3/16"	13/32"	7/32"	21/32"	13/32"	500	3989N11	00000


	1/4"	1/2"	1/4"	13/16"	1/2"	750	3989N12	0000
	5/16"	21/32"	5/16"	1 3/32"	21/32"	1,000	3989N13	0000
	3/8"	13/16"	13/32"	1 11/32"	13/16"	2,000	3989N14	00000
	15/32"	31/32"	1/2"	1 5/8"	31/32"	3,000	3989N15	00000
	5/8"	1 9/32"	5/8"	2 3/16"	1 9/32"	4,000	3989N16	00000
	3/4"	1 19/32"	25/32"	2 3/4"	1 19/32"	5,500	3989N17	00000


	Flush Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					1/4"	15/32"	1/4"	27/32"	15/32"	750	3982N11	0000


					5/16"	21/32"	5/16"	1 3/32"	21/32"	1,000	3982N12	0000
					3/8"	25/32"	13/32"	1 3/8"	25/32"	1,200	3982N13	00000
					15/32"	29/32"	1/2"	1 5/8"	29/32"	1,500	3982N14	00000
					1/2"	1 1/16"	9/16"	1 13/16"	1 1/16"	2,500	3982N15	00000
					5/8"	1 1/4"	21/32"	2 3/16"	1 1/4"	3,000	3982N16	00000
					3/4"	1 1/2"	3/4"	2 19/32"	1 1/2"	4,000	3982N17	00000
					7/8"	1 23/32"	7/8"	3"	1 23/32"	5,000	3982N18	00000
					1"	1 15/16"	1"	3 13/32"	1 15/16"	6,000	3982N19	00000


					Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	5/32"	17/32"	11/32"	300	3824T71	00000


									3/16"	13/32"	3/16"	21/32"	13/32"	400	3824T72	00000
									1/4"	1/2"	1/4"	13/16"	1/2"	700	3824T73	00000
									5/16"	21/32"	5/16"	1 1/32"	21/32"	1,100	3824T74	00000
									13/32"	13/16"	13/32"	1 5/16"	13/16"	1,800	3824T75	00000
									15/32"	31/32"	15/32"	1 9/16"	31/32"	2,600	3824T76	00000


									Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	3/16"	17/32"	11/32"	400	3824T81	00000


									3/16"	13/32"	7/32"	21/32"	13/32"	600	3824T82	00000
									1/4"	1/2"	1/4"	13/16"	1/2"	900	3824T83	00000
									5/16"	21/32"	11/32"	1 1/32"	21/32"	1,500	3824T84	00000
									13/32"	13/16"	13/32"	1 5/16"	13/16"	2,200	3824T85	00000
									15/32"	31/32"	1/2"	1 9/16"	31/32"	3,000	3824T86	000000


									Safety Cotter Pin







				Highly Corrosion-Resistant 316 Stainless Steel

				1/4"						1/2"	1/4"	13/16"	1/2"	750	4031N11	0000


				5/16"						21/32"	5/16"	1 3/32"	21/32"	1,000	4031N12	0000
				3/8"						13/16"	13/32"	1 11/32"	13/16"	2,000	4031N13	00000
				15/32"						31/32"	1/2"	1 5/8"	31/32"	3,000	4031N14	00000
				5/8"						1 9/32"	5/8"	2 3/16"	1 9/32"	4,000	4031N15	00000
				3/4"						1 1/2"	25/32"	2 3/4"	1 1/2"	5,500	4031N16	00000

Anchor Shackles

Screw Pin

Flush Screw Pin

Captive-Locking-Screw

Safety Cotter Pin

The most common choice for connecting slings, hooks, and more. The bow on these shackles is wider than the pin to support loads from multiple directions and accommodate multiple connectors. They’re often used to tie down or secure loads for transport or storage. Also known as bow shackles.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







		Highly Corrosion-Resistant 316 Stainless Steel

		5/32"	11/32"	5/32"	3/4"	9/16"	200	35355T94	00000


		3/16"	7/16"	7/32"	31/32"	23/32"	500	35355T13	0000
		1/4"	1/2"	1/4"	1 3/32"	27/32"	700	35355T14	0000
		5/16"	11/16"	5/16"	1 15/32"	1 1/8"	1,000	35355T25	0000
		3/8"	13/16"	13/32"	1 25/32"	1 3/8"	1,200	35355T26	00000
		15/32"	15/16"	15/32"	2 5/32"	1 21/32"	1,500	35355T95	00000
		1/2"	1 1/16"	17/32"	2 11/32"	1 7/8"	2,500	35355T27	00000
		5/8"	1 1/4"	5/8"	3"	2 3/16"	3,000	35355T96	00000
		3/4"	1 1/2"	3/4"	3 11/32"	2 11/16"	4,000	35355T97	00000
		7/8"	1 23/32"	7/8"	3 27/32"	2 31/32"	5,000	35355T98	00000
		1"	1 31/32"	31/32"	4 7/16"	3 3/8"	6,000	35355T28	000000


		1 1/4"	2 1/2"	1 1/4"	5 7/16"	4 15/32"	9,000	35355T99	000000


		Flush Screw Pin







						Highly Corrosion-Resistant 316 Stainless Steel

						1/4"	15/32"	1/4"	1 1/32"	25/32"	750	3981N11	0000


						5/16"	21/32"	5/16"	1 7/16"	1 1/32"	1,000	3981N12	0000
						3/8"	25/32"	13/32"	1 3/4"	1 1/4"	1,200	3981N13	00000
						15/32"	15/16"	1/2"	2 5/32"	1 19/32"	1,500	3981N14	00000
						1/2"	1 1/32"	17/32"	2 5/16"	1 27/32"	2,500	3981N15	00000
						5/8"	1 1/4"	21/32"	3"	2 3/32"	3,000	3981N16	00000
						3/4"	1 1/2"	3/4"	3 5/16"	2 17/32"	4,000	3981N17	00000
						7/8"	1 23/32"	7/8"	3 27/32"	2 7/8"	5,000	3981N18	00000
						1"	1 15/16"	31/32"	4 13/32"	3 1/4"	6,000	3981N19	000000


						Captive-Locking-Screw Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										5/32"	5/16"	3/16"	23/32"	1/2"	400	3797T61	00000


										3/16"	13/32"	1/4"	29/32"	5/8"	600	3797T62	00000
1/4"										15/32"	9/32"	1 3/32"	3/4"	900	3797T53	00000
5/16"	5/8"									11/32"	1 15/32"	1 1/32"	1,600	3797T54	00000
3/8"	25/32"									13/32"	1 3/4"	1 11/32"	1,200	3797T101	00000
13/32"	25/32"									7/16"	1 13/16"	1 3/8"	2,200	3797T55	00000
15/32"	15/16"									15/32"	2 5/32"	1 21/32"	1,500	3797T102	00000


Safety Cotter Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										1/4"	1/2"	1/4"	29/32"	13/16"	750	3992N11	0000


										5/16"	21/32"	5/16"	1 1/4"	1 3/32"	1,200	3992N12	00000
										3/8"	13/16"	13/32"	1 9/16"	1 1/4"	2,000	3992N13	00000
										15/32"	31/32"	1/2"	1 15/16"	1 1/2"	3,000	3992N14	00000
										5/8"	1 9/32"	5/8"	2 15/32"	2 3/16"	4,000	3992N15	00000
										3/4"	1 19/32"	25/32"	3 3/32"	2 17/32"	5,500	3992N16	00000

Flat Shackles for Lifting

Lift with web slings. The wide, flat bow on these shackles prevents your sling from folding or bunching to keep loads distributed equally. All meet ASME specifications for rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as webbing shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

High-Strength Painted Alloy Steel—The paint provides some corrosion resistance, but can chip or wear away over time.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each
Screw Pin







	High-Strength Painted Alloy Steel

	1"	3/4"	7/8"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	35505T1	000000


	1 1/2"	1"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	35505T2	00000
	2"	1 1/8"	1 3/8"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	35505T3	00000
	3"	1 3/8"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	35505T4	000000
	4"	1 3/4"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	35505T5	000000
	5"	2 1/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	35505T6	000000
	6"	2 3/4"	3"	2 1/4"	7 23/32"	6 1/2"	100,000	ASME B30.26	35505T7	00000000


	Safety Cotter Pin







					High-Strength Painted Alloy Steel

					1"	9/16"	1 1/16"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	35505T84	00000


					1 1/2"	3/4"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	35505T85	00000
					2"	7/8"	1 3/8"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	35505T86	000000
					3"	1 1/8"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	35505T87	000000
					4"	1 3/8"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	35505T88	000000
					5"	1 3/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	35505T89	000000




							High-Strength Galvanized Alloy Steel

							2"	11/16"	1 1/4"	29/32"	3 17/32"	2 1/2"	15,400	ASME B30.26	4043N11	000000


							3"	15/16"	1 11/16"	1 5/32"	4 5/8"	3 1/4"	27,500	ASME B30.26	4043N12	000000
							3 1/2"	1 7/32"	2 1/32"	1 13/32"	5 13/16"	4"	39,600	ASME B30.26	4043N13	000000

D-Type Shackles for Lifting

The best choice for lifting with chain. The bow and pin are equally wide to keep chain links from sliding or moving and support heavier vertical loads than anchor shackles. However, they're rated for vertical lifting only, as side loading might deform the bow. All meet ASME specifications for use with rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as chain shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met	Mil. Spec.		Each
Screw Pin







				Galvanized Steel

				1/4"	1/2"	5/16"	29/32"	1/2"	1,500	ASME B30.26	—	3560T31	000000


				5/16"	9/16"	13/32"	1 1/32"	9/16"	2,000	ASME B30.26	—	3560T32	00000
				3/8"	11/16"	15/32"	1 1/4"	11/16"	3,000	ASME B30.26	—	3560T33	00000
				7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3560T47	00000
				1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3560T48	00000
				5/8"	1 1/16"	3/4"	2 1/16"	1 1/16"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3560T49	00000
				3/4"	1 1/4"	29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3560T51	00000
				7/8"	1 15/32"	1"	2 7/8"	1 7/16"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3560T52	00000
				1"	1 23/32"	1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3560T53	000000
				1 1/8"	1 13/16"	1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	—	3560T34	000000
				1 1/4"	2 1/32"	1 13/32"	4"	2"	26,400	ASME B30.26	Fed. Spec. RR-C-271	3560T55	000000


				1 3/8"	2 1/4"	1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	—	3560T87	000000
				1 1/2"	2 13/32"	1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	—	3560T35	000000
				1 3/4"	2 29/32"	2"	5 3/4"	2 29/32"	60,000	ASME B30.26	—	3560T36	000000
				2"	3 9/32"	2 1/4"	6 3/4"	3 9/32"	70,000	ASME B30.26	—	3560T59	000000




						Highly Corrosion-Resistant 316 Stainless Steel

						1/4"	15/32"	5/16"	7/8"	15/32"	1,000	ASME B30.26	Fed. Spec. RR-C-271	35895T111	0000


						5/16"	17/32"	13/32"	1 1/32"	17/32"	1,300	ASME B30.26	Fed. Spec. RR-C-271	35895T112	00000
						3/8"	21/32"	15/32"	1 1/4"	21/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	35895T113	00000
						7/16"	3/4"	1/2"	1 7/16"	3/4"	2,000	ASME B30.26	Fed. Spec. RR-C-271	35895T119	00000
						1/2"	13/16"	21/32"	1 19/32"	13/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	35895T114	00000
						5/8"	1 1/16"	3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26	Fed. Spec. RR-C-271	35895T115	00000
						3/4"	1 7/32"	29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	35895T116	000000
						7/8"	1 15/32"	1"	2 29/32"	1 15/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	35895T117	000000
						1"	1 11/16"	1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	35895T118	000000


						Safety Cotter Pin







										Galvanized Steel

										1/4"	1/2"	5/16"	15/16"	7/16"	1,100	ASME B30.26	Fed. Spec. RR-C-271	3556T26	00000


										5/16"	17/32"	13/32"	1 3/32"	1/2"	1,600	ASME B30.26	Fed. Spec. RR-C-271	3556T27	00000
										3/8"	11/16"	15/32"	1 9/32"	5/8"	2,200	ASME B30.26	Fed. Spec. RR-C-271	3556T28	00000
										7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3556T29	00000
										1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3556T14	00000
5/8"										1 1/16"	25/32"	2 1/16"	1 1/16"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3556T15	00000
3/4"	1 1/4"									29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3556T16	00000
7/8"	1 15/32"									1 1/32"	2 7/8"	1 7/16"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3556T17	000000
1"	1 23/32"									1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3556T18	000000




		High-Strength Galvanized Alloy Steel

		1/4"	15/32"							5/16"	7/8"	15/32"	1,500	ASME B30.26	—	3556T38	00000


		5/16"	17/32"							13/32"	1"	17/32"	2,000	ASME B30.26	—	3556T39	00000
		3/8"	21/32"							15/32"	1 1/4"	21/32"	3,000	ASME B30.26	—	3556T41	00000
		1/2"	13/16"							21/32"	1 11/16"	13/16"	6,000	ASME B30.26	—	3556T42	00000
		5/8"	1 1/16"							3/4"	2"	1 1/16"	9,000	ASME B30.26	—	3556T43	00000
		3/4"	1 1/4"							29/32"	2 3/8"	1 1/4"	13,000	ASME B30.26	—	3556T44	00000
		7/8"	1 7/16"							1"	2 7/8"	1 7/16"	17,000	ASME B30.26	—	3556T45	000000
		1 1/8"	1 13/16"							1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	—	3556T33	000000
		1 1/4"	2 1/32"							1 13/32"	3 31/32"	2 1/32"	28,000	ASME B30.26	—	3556T34	000000
		1 3/8"	2 1/4"							1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	—	3556T35	000000
		1 1/2"	2 13/32"							1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	—	3556T36	000000


		1 3/4"	2 29/32"							2"	5 3/4"	2 29/32"	60,000	ASME B30.26	—	3556T37	000000
		2"	3 9/32"							2 1/4"	6 3/4"	3 9/32"	70,000	ASME B30.26	—	3556T25	000000




				Highly Corrosion-Resistant 316 Stainless Steel

				3/8"	21/32"					15/32"	1 1/4"	21/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	35895T123	00000


				1/2"	13/16"					21/32"	1 19/32"	13/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	35895T124	00000
				5/8"	1 1/16"					3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26	Fed. Spec. RR-C-271	35895T125	000000
				3/4"	1 7/32"					29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	35895T126	000000
				7/8"	1 15/32"					1"	2 29/32"	1 15/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	35895T127	000000
				1"	1 11/16"					1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	35895T128	000000

Flexible Shackles

A flexible, lightweight alternative to steel shackles. Made of polyethylene rope with a nylon cover, they wrap around a variety of anchor points without marring surfaces. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Warning: Not for overhead lifting.

	Each







Polyethylene Rope with Nylon Fabric Cover

9/16"	4"	5,500	3968N11	000000


9/16"	8"	5,500	3968N12	00000
21/32"	5"	8,800	3968N13	00000
21/32"	10"	8,800	3968N14	00000
3/4"	5"	11,200	3968N15	00000
3/4"	10"	11,200	3968N16	00000
15/16"	5"	14,300	3968N17	00000
15/16"	10"	14,300	3968N18	00000

90° Twist Shackles

Screw Pin

Flush Screw

Captive-Locking-Screw

Connect loads perpendicular to your anchor point without any twisting or knotting. The bow on these shackles is twisted 90° from the orientation of the pin, so they keep chain, ropes, and slings connected to the load and lifting point properly aligned.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	5/32"	5/16"	5/32"	5/8"	5/16"	200	33845T32	00000


	3/16"	3/8"	3/16"	13/16"	3/8"	500	33845T33	0000
	1/4"	7/16"	1/4"	1"	7/16"	700	33845T34	0000
	5/16"	9/16"	5/16"	1 5/16"	9/16"	1,000	33845T35	00000
	3/8"	23/32"	3/8"	1 13/16"	23/32"	1,200	33845T36	00000
	1/2"	31/32"	1/2"	2 13/16"	31/32"	1,500	33845T37	00000


	Flush Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					1/4"	13/32"	1/4"	1"	15/32"	750	3984N11	0000


					5/16"	5/8"	5/16"	1 9/32"	21/32"	1,000	3984N12	00000
					3/8"	11/16"	13/32"	1 25/32"	3/4"	1,200	3984N13	00000
					1/2"	15/16"	1/2"	2 3/16"	27/32"	1,500	3984N14	00000


					Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									1/4"	13/32"	1/4"	1"	15/32"	750	3985N11	0000


									5/16"	5/8"	5/16"	1 9/32"	21/32"	1,000	3985N12	00000
									3/8"	25/32"	11/32"	1 25/32"	3/4"	1,200	3985N13	00000

Flat Shackles

Keep loads distributed equally when using a web sling. The wide, flat bow on these shackles prevents slings from folding or bunching.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	1"	5/32"	5/16"	7/32"	1 1/8"	1"	200	4038N11	000000

Dual-Connect Shackles for Lifting

Flush

Hammer-Set-Dowel

Flush

Hammer-Set-Dowel

Pin/Safety

Cotter Pin

Attach chain to pins on both ends of these shackles—no extra hardware needed. Connect them to two lengths of chain or use them as a stable, inline connection in a lifting system. All meet ASME specifications for use with rigging and lifting equipment.

Note: Capacity limits are based on loads applied in line with a straight length of rope or chain. Test all assemblies for required strength before use.

Hammer-Set-Dowel Pin—Hammer in dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, they won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

	Top Opening			Bottom Opening
	Opening Wd.	Pin Dia.	Inside Lg.	Opening Wd.	Pin Dia.	Inside Lg,	Wt. Cap., lb.	Specs. Met		Each
Flush Hammer-Set-Dowel Pin







				High-Strength Powder-Coated Alloy Steel

				27/32"	5/8"	1 15/32"	15/32"	15/32"	15/32"	7,100	ASME B30.26	3532T11	0000000


				1 1/16"	25/32"	1 15/16"	9/16"	5/8"	19/32"	12,000	ASME B30.26	3532T12	000000
				1 11/32"	15/16"	2 1/4"	11/16"	3/4"	25/32"	18,100	ASME B30.26	3532T13	000000


				Flush Hammer-Set-Dowel Pin/Safety Cotter Pin







								High-Strength Powder-Coated Alloy Steel

								13/16"	1 3/32"	1 15/32"	15/32"	15/32"	15/32"	7,100	ASME B30.26	3532T26	000000


								1 1/16"	1 1/4"	1 15/16"	9/16"	5/8"	19/32"	12,000	ASME B30.26	3532T27	000000
								1 11/32"	1 13/32"	2 1/4"	11/16"	3/4"	25/32"	18,100	ASME B30.26	3532T28	000000