System of Measurement System of Measurement |
|---|
|
Flexibility Flexibility |
|---|
 | Difficult to Bend |
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Wire Rope Coating Wire Rope Coating |
|---|
|
Material Material |
|---|
|
Shape Shape |
|---|
 | Rod and Disc |
Tolerance Rating Tolerance Rating |
|---|
|
Construction Construction |
|---|
|
Application Application |
|---|
|
Capacity Capacity |
|---|
|
Lubrication Lubrication |
|---|
|
Attachment Type Attachment Type |
|---|
 | Plain |
Core Type Core Type |
|---|
 | Strand |
Recommended Pulley/Drum Diameter RecommendedPulley/Drum Diameter |
|---|
|
Elongation Elongation |
|---|
|
Hardness Hardness |
|---|
|
Mechanical Finish Mechanical Finish |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Yield Strength Yield Strength |
|---|
|
Finish Finish |
|---|
|
About Tool Steel
More
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.021" | -0.0002" to 0" | 75 | 1" | Precision Ground | 0.001" | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.021" | 0" to 0.0002" | 75 | 1" | -1/32" to 1/32" | Precision Ground | 0.001" | 00000000 | 00000 |
Difficult-to-Bend Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting
This braided wire has a stiff construction for use as bracing and guy wires. This stainless steel braided wire can handle corrosive environments, such as areas that are frequently washed down. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Lubricated rope reduces wear.