We will reply to your message within an hour.
Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.
This wire bounces back after bending. It’s often used to construct springs and wire rope.
When bent, this wire will stay in place. It's widely used as tying and locking wire.
Bend this wire and it will stay in place. It's widely used as tying and locking wire.
This wire will spring back after bending. It's often used to make springs and wire rope.
Bend this wire and it will stay in place. It's commonly used as tying and locking wire.
This nickel-chromium, often called Chromel C, provides effortless formability. Use it for heating elements, resistance windings, and hot-wire cutters.
Bend this wire and it will stay in place. It is often used as safety lock wire.
Able to withstand temperatures up to 1000° F, 600 nickel is often used as safety lock wire in high-temperature applications. It is comparable to Inconel.
This wire is polished to a mirror-like finish.
The tin coating provides a higher level of corrosion resistance and makes it easier to solder than Mirror-Like Multipurpose 110 Copper Wire.
This copper wire is clad in nickel to provide excellent corrosion resistance at temperatures up to 1200° F while maintaining high electrical conductivity.
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. 260 brass is sometimes called cartridge brass. This wire has a soft temper and stays in place when bent.
Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.
This wire has a soft temper and will stay in place when bent.
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.
Also known as reamer blanks, these rods are hardened for increased abrasion and impact resistance.
This wire will spring back after bending. It's often used in heating and electrical applications.
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys.
This wire rope provides a good balance of abrasion resistance and flexibility.
More wires per strand than other wire rope gives this wire rope the flexibility required for repeat bending over drums and pulleys.
Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.
The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.
The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.
Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.
Electrically conductive, this solder is best for electronics and electronics applications.
Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.
Use this solder for general purpose applications.