System of Measurement System of Measurement |
|---|
|
Flexibility Flexibility |
|---|
 |  |
| Extra Flexible | Flexible |
 | |
| Difficult to Bend |
Length Length |
|---|
|
|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Material Material |
|---|
|
Attachment Type Attachment Type |
|---|
 | Plain |
Application Application |
|---|
|
Coating Material Coating Material |
|---|
|
Lubrication Lubrication |
|---|
|
Preformed Preformed |
|---|
|
Finish Finish |
|---|
|
Specifications Met Specifications Met |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Shape Shape |
|---|
 | Wire |
About Stainless Steel
More
View a wire gauge conversion chart.
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
- Heat Treatment: Hardened
- Tensile Strength: 205,000 psi
- Specifications Met: ASTM A313, ASTM A555
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | ||||||
| 0.047" | -0.001" to 0.001" | Cold Drawn | 570° | 100 | 0000000 | 000000 |
Bend-and-Stay Corrosion-Resistant
316 Stainless Steel Wire
Bend this wire and it will stay in place. It's widely used as tying and locking wire. Made of 316/316L stainless steel, it has less carbon than standard 316 for better weldability. The addition of molybdenum gives this material excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
30 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Each | |
Matte | ||||
| 0.047" | -0.001" to 0.001" | 400° | 000000000 | 000000 |
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | |||||
| 0.047" | -0.001" to 0.001" | 400° | 25 | 000000000 | 000000 |
Lubricated 1080 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 261,000 psi
- Specifications Met: ASTM A228
Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Temperature Range | Pkg. Qty. | Pkg. | |
| 0.047" | -0.0005" to 0.0005" | Hardened | Not Rated | 100 | 0000000 | 000000 |
Lubricated 1065 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 195,000 psi
- Specifications Met: ASTM A229, MIL-W-21425B Type 1
This wire is coated with oil for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Extra-Flexible Coated Corrosion-Resistant
Wire Rope—Not for Lifting
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Lubricated rope reduces wear.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
Coated Corrosion-Resistant Wire Rope—Not for Lifting
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Lubricated rope reduces wear. Extra-lubricated wire rope has an additional coating of lubrication for added wear and corrosion resistance.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
| Dia. | Dia. with Coating | Cap., lbs. | Recommended Pulley/Drum Dia. | Coating Material | Lubrication | Temp. Range, °F | Specifications Met | Choose a Coating Color | Lengths, ft. | Per Ft. | |
18-8 Stainless Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
7 × 7—Strand Core | |||||||||||
| 0.047" | 1/16" | 50 | 1 15/16" | Nylon Plastic | Lubricated | -40° to 180° | __ | 00000000 | 00000 | ||
| 0.047" | 1/16" | 50 | 1 15/16" | Nylon Plastic | Extra Lubricated | -65° to 200° | MIL-DTL-83420 | Clear | 0000000 | 000 | |
Coated Wire Rope—Not for Lifting
The construction of this wire rope provides a good balance of abrasion resistance and flexibility. The galvanized finish is corrosion resistant. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Lubricated rope reduces wear. Extra-lubricated wire rope has an additional coating of lubrication for added wear and corrosion resistance.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
| Dia. | Dia. with Coating | Cap., lbs. | Recommended Pulley/Drum Dia. | Coating Material | Lubrication | Temp. Range, °F | Specifications Met | Choose a Coating Color | Lengths, ft. | Per Ft. | |
Galvanized Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
7 × 7—Strand Core | |||||||||||
| 0.047" | 1/16" | 50 | 1 15/16" | Nylon Plastic | Lubricated | -65° to 200° | __ | 00000000 | 00000 | ||
| 0.047" | 1/16" | 50 | 1 15/16" | Nylon Plastic | Extra Lubricated | -65° to 200° | MIL-DTL-83420 | Clear | 0000000 | 000 | |
Weather-Resistant Coated Corrosion-Resistant
Wire Rope—Not for Lifting
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility. Coated with vinyl, this wire rope resists UV rays better than nylon-coated wire rope. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
Weather-Resistant Coated Wire Rope—Not for Lifting
Coated with vinyl, this wire rope resists UV rays better than nylon-coated wire rope. The construction of this wire rope provides a good balance of abrasion resistance and flexibility. The galvanized finish is corrosion resistant. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
Extra-Flexible Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys and the stainless steel wire rope withstands outdoor and washdown applications. An impregnated coating provides additional resistance over other coated wire rope. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
Chemical-Resistant Coated
Corrosion-Resistant Wire Rope—Not for Lifting
This stainless steel wire rope withstands outdoor and washdown applications. The construction of this wire rope provides a good balance of abrasion resistance and flexibility. An impregnated coating provides additional resistance over other coated wire rope. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
Note: When attaching fittings to coated rope, the coating must be removed from the installation area.
Difficult-to-Bend Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting
This braided wire has a stiff construction for use as bracing and guy wires. This stainless steel braided wire can handle corrosive environments, such as areas that are frequently washed down. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Lubricated rope reduces wear. Extra-lubricated braided wire has an additional coating of lubrication for added wear and corrosion resistance.
| Dia. | Capacity, lbs. | Recommended Pulley/Drum Dia. | Lubrication | Specifications Met | Lengths, ft. | Per Ft. | |
18-8 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
1 × 7—Strand Core | |||||||
| 0.047" | 70 | Not Rated | Lubricated | __ | 000000 | 00000 | |
| 0.047" | 70 | Not Rated | Extra Lubricated | MIL-DTL-87161 | 00000000 | 000 | |
1 × 19—Strand Core | |||||||
| 0.047" | 70 | Not Rated | Lubricated | __ | 00000000 | 000 | |
| 0.047" | 70 | Not Rated | Extra Lubricated | MIL-DTL-87161 | 0000000 | 000 | |
Extra-Flexible Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting
More wires per strand than other wire rope provides the flexibility required for repeat bending over drums and pulleys. This stainless steel braided wire can handle corrosive environments, such as areas that are frequently washed down. Rope is lubricated to reduce wear. Preformed wire rope maintains its shape when cut and resists unraveling.
Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting
This stainless steel braided wire can handle corrosive environments, such as areas that are frequently washed down. This wire rope provides a good balance of abrasion resistance and flexibility. Preformed wire rope maintains its shape when cut and resists unraveling. Extra-lubricated braided wire has an additional coating of lubrication for added wear and corrosion resistance.
Strand core is more crush resistant than hollow core.
Small-Diameter Braided Wire—Not for Lifting
This wire rope is often used for lightweight suspending applications, such as hanging light fixtures. This wire rope provides a good balance of abrasion resistance and flexibility. The galvanized finish is corrosion resistant. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
Difficult-to-Bend Small-Diameter
Braided Wire—Not for Lifting
This braided wire has a stiff construction for use as bracing and guy wires. This wire rope is often used for lightweight suspending applications, such as hanging light fixtures. The galvanized finish is corrosion resistant. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Extra-lubricated braided wire has an additional coating of lubrication for added wear and corrosion resistance.
Nonsparking Corrosion-Resistant
Small-Diameter Braided Wire—Not for Lifting
Not only is this phosphor bronze braided wire corrosion resistant, it inhibits sparking. This wire rope provides a good balance of abrasion resistance and flexibility. Rope is lubricated to reduce wear.
Preformed wire rope maintains its shape when cut and resists unraveling.
Ultra-Corrosion-Resistant Small-Diameter
Braided Wire—Not for Lifting
The superior corrosion resistance of nickel-copper makes this braided wire best for use with salt water and acidic- and alkaline-based solutions. This wire rope provides a good balance of abrasion resistance and flexibility. Individual wire strands are preformed to maintain their shape and prevent rope from unraveling when cut. Rope is lubricated to reduce wear.
MIG Welding Wire for Aluminum
This ER4043 wire is for aluminum 43, 356, 3003, 3004, 5052, 6061, and 6063.
1 lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wire Type | Welding Current Designation | Shielding Gas Required | Shielding Gas Included | Approximate Lg. per Pound, ft. | Spool Dia. | Arbor Hole Size | Each | |
ER4043 | |||||||||
| 0.047" | Solid | DCEP | Yes | No | 650 | 4" | 0.63" | 00000000 | 000000 |
High-Strength MIG Welding Wire for Aluminum
This wire creates stronger welds than standard welding wire for aluminum. It is ER5356, which is for aluminum 5050, 5052, 5083, 5454, 5456, 5457, and 5458.
1 lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wire Type | Welding Current Designation | Shielding Gas Required | Shielding Gas Included | Approximate Lg. per Pound, ft. | Spool Dia. | Arbor Hole Size | Each | |
ER5356 | |||||||||
| 0.047" | Solid | DCEP | Yes | No | 650 | 4" | 0.63" | 00000000 | 000000 |